In looking at the ITM side of it, gen-sets are run monthly whereas
fire pumps are run weekly. I haven't really looked at the other
aspects of gen-sets (like are you suppose to have a live body at the
driver while running - I"m betting NO) but the test cycle came up
during the last NFPA 25 ROP as part of the effort the reduce the pump
test frequency. Most amusing that the same diesel driver must
operate for the pump to work (since the electric pump won't go
without the gen-set OR ARE YOU USING IT AS BACK-UP?) but they have
significantly different testing frequencies.
Roland
On Feb 15, 2008, at 11:07 AM, Todd Williams - FPDC wrote:
In general, I would say diesel as well, but each situation is
different. If this is a retrofit, look at the installation issues.
It may be better to install a pump inside the existing building and
put a generator outside as opposed to a new building/addition to
house the diesel. Where are they going to be getting the suction
water from?
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)