Yes On Thu, Apr 17, 2008 at 2:59 PM, Ed Kramer <[EMAIL PROTECTED]> wrote: > Forum members - your opinions on the following situation, please: > > > > Design standard is 13R 2007 edition. System type will be antifreeze with a > volume exceeding 40 gallon. > > > > Per 13R section 6.8.4, "Piping shall be sized using hydraulic calculation > procedures in accordance with NFPA 13". NFPA 13 says to use the > Darcy-Weisbach method (section 22.4.4.5.1). > > > > Do you think it's the intent of 13R to require the calcs be done using > Darcy-Weisbach? > > > > Ed Kramer > > Littleton, CO > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) >
-- Ron Greenman at home.... _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
