An air compressor is not required by NFPA 13 to be on an emergency or
stand-by power.  An air compressor is not required to be listed.  An air
compressor is not even required.

I would state normal building power is fine with a disconnect to allow
servicing of the air compressor is all that is required.

Hope this helps,
John

John August Denhardt, P.E.
Strickland Fire Protection Incorporated
5113 Berwyn Road
College Park, Maryland 20740
Office Telephone Number:  301-474-1136
Mobile Telephone Number:  301-343-1457
FIRE SPRINKLERS SAVE LIVES 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Reed
Roisum
Sent: Thursday, July 24, 2008 1:07 PM
To: '[email protected]'
Subject: Air Compressor Power Supply

A building (nursing home) with an emergency generator has a dry system.
Is the air compressor required to be connected to the emergency
generator?

NFPA-13 (2007) 7.2.6.2.1,2 says that the air supply shall be from a
source available at all times and shall be capable of restoring normal
air pressure in the system within 30 minutes.

Does this imply that yes it would be required to be connected to the em.
power when available or does it just need to be an unswitched circuit?

It seems as though it would be advisable for the compressor to be on the
generator circuit but I want to know if it would be required.

Thank you for any input and/or references.

Reed A. Roisum, CET
Fire Protection Technician
NICET Level III

Ulteig Engineers, Inc.
3350 38th Avenue South
Fargo, ND 58104-7079

Direct Number: 701.280.8580
Mobile: 701.212.8810
Main Office: 701.280.8500

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to