In my basement, it is 13D.... How is the barrel on top supported from the barrel below, i.e. what is the cradle for the top barrel sitting on? If the cradle structure also supports the cradle for the barrel above, it would almost sound like portable rack storage
At 02:14 PM 5/19/2009, you wrote: >Greetings All: > > > >Has anybody on this forum designed systems for wine barrel storage? I'm >guessing the Californians have. Barrels are in horizontal position, stored >on a cradle, cradle follows curvature of barrel, cradle / barrel is stacked >6 high total height of 18'. There is a 6" clearance between stacks i.e top >of barrel to bottom of barrel, small transverse and longitudinal space. My >gut re-action would be considering this palletized storage versus rack. >When the barrel is picked up so is its corresponding cradle - that's where I >come up with palletize. Alcohol less than 20% in wood barrels is a class >II. > > > >Any input? > > > >Jim Johnston, P.E. > >Fire Protection Engineer > >Inland Fire Protection, Inc > >1100 Ahtanum Road > >Yakima, WA 98903 > >Phone 509-248-4471 > >Fax 509-248-1180 > >[email protected] > > > >_______________________________________________ >Sprinklerforum mailing list >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
