We have a new customer with repair problems. To do the repair, we shut off the water in the outside pit. We still can't drain the system. Clear water runs at about 25 PSI. We called in the water purveyor and they shut it off at the street. Same results unchanged. We have examined the original site plans showing only one connection. Water purveyor has checked their plans and agrees. Obviously there is another connection, whereabouts unknown to anybody. Any suggestions on how to proceed? We could freeze the line for the repair, but would prefer to locate this other connection.
C. Burton Ford Designer- NICET Certified: Fire Alarm, Special Hazards, Sprinkler Design &Sprinkler Inspections NFPA CFPS Cintas Fire Protection-D-47 Warminster, PA 18974 Phone 267-487-1000 Fax 267-487-1010 This e-mail transmission contains information that is intended to be confidential and privileged. If you receive this e-mail and you are not a named addressee you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this communication without the consent of the sender and that doing so is prohibited and may be unlawful. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please delete and otherwise erase it and any attachments from your computer system. Your assistance in correcting this error is appreciated. _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
