No no, Bobby is in TN. and this is a fully covered canopy. - beam & purlin construction.
Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Cahill Sent: Wednesday, March 17, 2010 1:26 PM To: [email protected] Subject: RE: Exterior dry system piping under canopy I don't see it as that clear. '02-8.15.3.2.3 Where corrosive conditions exist OR the piping is exposed to weather...... So I guess it depends on the definition of "exposed to weather". One could say outside period. Bobby is in FL, I imagine ambient air is a little moister and perhaps saltier even inland than here in the flooded tundra. Or I guess it could mean gets rained on so with a cover maybe not exposed to weather. I know open parking ramps don't fair well here with black nor do wash bays inside. Generic store front canopy a little grayer. Chris Cahill, P.E. Fire Protection Engineer Sentry Fire Protection, Inc. 763-658-4483 763-658-4921 fax Email: [email protected] Mail: P.O. Box 69 Waverly, MN 55390 Location: 4439 Hwy 12 SW Waverly, MN 55390 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Denhardt Sent: Wednesday, March 17, 2010 12:39 PM To: [email protected] Subject: RE: Exterior dry system piping under canopy It is not required to be galvanized per NFPA 13. John John August Denhardt, P.E. Strickland Fire Protection Incorporated 5113 Berwyn Road College Park, Maryland 20740 Office Telephone Number: 301-474-1136 Mobile Telephone Number: 301-343-1457 FIRE SPRINKLERS SAVE LIVES -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bobby Gillett Sent: Wednesday, March 17, 2010 1:44 PM To: [email protected] Subject: Exterior dry system piping under canopy I have a dry system (non-FM in TN) under an exterior canopy. Is there somewhere it states the pipe and fittings are to be corrosion resistant (ex. Galv.)? I thought somewhere it stated for preact it had to be regardless, but I can't find that either. Maybe I'm pulling an old spec from a project out of my brain as the last two I've done have required galv. piping per the spec book. Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell <mailto:[email protected]> [email protected] _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.791 / Virus Database: 271.1.1/2752 - Release Date: 03/17/10 02:33:00 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
