I did...and I got it in writing just in case a year from now when the project is finishing up he catches amnesia.
Mike Brown Project Designer Sunland Fire Protection, Inc. 1218 Elon Place High Point, NC 27263 [email protected] Business: 336-886-7027 Ext. #140 Fax: 336-886-7024 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, June 08, 2010 2:34 PM To: [email protected] Subject: RE: Department of Insurance Make sure the person you're dealing with agrees. I have found there is not always consensus amongst the individuals in their interpretations. Just double check first. Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian Harris Sent: Tuesday, June 08, 2010 2:32 PM To: [email protected] Subject: RE: Department of Insurance Bingo! The price of the heads makes sense but the Area Reduction makes allot of sense! Thanks guys! Regards, Brian Harris FDFP INC. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brown, Mike Sent: Tuesday, June 08, 2010 2:14 PM To: [email protected] Subject: RE: Department of Insurance Remote Area Reduction Mike Brown Project Designer Sunland Fire Protection, Inc. 1218 Elon Place High Point, NC 27263 [email protected] Business: 336-886-7027 Ext. #140 Fax: 336-886-7024 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian Harris Sent: Tuesday, June 08, 2010 2:08 PM To: [email protected] Subject: Department of Insurance I'm sure this varies from state to state but here in NC it's not uncommon for state owned buildings to include the DOI spec in the contract spec's. If anyone's familiar with this particular version of it I have a quick question: Ordinary Hazard group-1 is the minimum design allowed but they do give a couple exceptions. One is that QR & QREC heads listed for light hazard are permitted as long as OH-1 density is still achieved. What would be the benefits of applying this exception? Thanks! Brian Harris _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
