We are calculating 1,250 gpm fed through two FDC's which in turn are fed by 3" hoses (per the Fire Department) ... Greg
On Wed, Apr 6, 2011 at 3:26 PM, <[email protected]> wrote: > Never knew there was a 3" hose????Is this a manual wet or dry > standpipe?Either way the 500 gpm requirement is at the FDV on the > standpipe,unless I have missed something (which is very possible!). > > Lamar Vaughn,SET > > > > On Wed, Apr 6, 2011 at 4:09 PM, Greg McGahan wrote: > > If you have to calculate a manual standpipe, what HW coefficient do you >> use >> for standard fire hoses? >> >> and what internal diameter is a 3" hose? >> >> Thanks, >> Greg >> >> -- >> Greg McGahan >> Living Water Fire Protection, LLC <http://www.livingwaterfp.com> >> >> 1160 McKenzie Road >> Cantonment, FL 32533 >> 850-937-1850 >> fax 850-937-1852 >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >> For Technical Assistance, send an email to: [email protected] >> >> To Unsubscribe, send an email to:[email protected] >> (Put the word unsubscribe in the subject field) >> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > -- Greg McGahan Living Water Fire Protection, LLC <http://www.livingwaterfp.com> 1160 McKenzie Road Cantonment, FL 32533 850-937-1850 fax 850-937-1852 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
