Thank you, just wanted to make sure I wasn't overlooking anything before I
argued. We have a state fire marshal that likes to see sleeves in all
block/concrete walls and I had brought this up before we started the project
to try and remedy it. They said they would be willing to look into the
requirements, instead of what they usually ask for, and admitted it may not
be per code but they have always just asked for it. I expressed that 95% of
the walls are not rated and it would be unnecessary. We are supposed to talk
more about it tomorrow and I just wanted to be prepared.

Thank you,

Bobby Gillett
Sr. Project Manager
Key Fire Protection, Inc.
(731) 424-0130 office  (731) 424-9285 fax 
(731) 267-4853 cell
[email protected]
 
 

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: Thursday, July 07, 2011 4:03 PM
To: [email protected]
Subject: RE: Pipe Sleeves

No requirement for sleeves in 13, just clearance. 

Not saying the architect or other entity may have a requirement for sleeves
so check the specs if there are any.

Craig L. Prahl, CET   
Fire Protection 
CH2MHILL
Lockwood Greene
1500 International Drive
Spartanburg, SCĀ  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
CH2MHILL Extension  74102
[email protected]



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bobby Gillett
Sent: Thursday, July 07, 2011 4:57 PM
To: [email protected]
Subject: Pipe Sleeves

We have an existing school we are sprinkling. When we pass through a block
wall, non-rated (smoke, fire etc.) we plan on providing clearance or a flex
coupling within a foot of the wall on both sides of the wall. Does it say
anywhere we have to use sleeves for block walls? We will be using Sch. 10 &
40 pipe as well as CPVC. I can't seem to find anything other than NFPA 13 -
2007 9.3.4.3 "Where clearance is provided by a pipe sleeve.." But nothing
requiring one.

 

Thank you in advance.

 

Bobby Gillett

Sr. Project Manager

Key Fire Protection, Inc.

(731) 424-0130 office  (731) 424-9285 fax 

(731) 267-4853 cell

 <mailto:[email protected]>
[email protected]

 

 

 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1388 / Virus Database: 1516/3749 - Release Date: 07/07/11

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to