I've gotten around 980 gpm out of a 50' 2-1/2" hose & hose monster.  Drained a 
45,000 gal pool in just under 45 min.

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Eric Tysinger
Sent: Tuesday, August 02, 2011 3:15 PM
To: [email protected]
Subject: RE: How much discharge from a 2" system drain

I've seen as much as 400-500gpm out of a single 2½" hose valve at around 175psi 
static starting pressure.


Thanks,
Eric Tysinger CET
NICET III - 108988
Designer - Fort Myers Branch
Wayne Automatic Fire Sprinklers, Inc.
4683 Laredo Ave.
Fort Myers, Florida 33905
p: (239)433-3030 x1240    f: (239)433-3263
C: (239)633-9703



-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of 
[email protected]
Sent: Tuesday, August 02, 2011 3:02 PM
To: [email protected]
Subject: How much discharge from a 2" system drain

Plumbing engineer is asking how much flow could come from a 2" main drain at 
the riser.  They are sizing floor sinks to capture the discharge.  No we're not 
discharging it outside like usual.  This isn't a "usual" client.

System pressures from the pump are around 200psi static and 180 psi residual.  
That's a whole other issue.

Craig L. Prahl, CET   
Fire Protection
CH2MHILL
Lockwood Greene
1500 International Drive
Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
CH2MHILL Extension  74102
[email protected]

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field) 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to