6.5 Joining of Pipe and Fittings. sprinkler systems shall meet the following requirements: (1)Be installed in accordance with the listing and manufacturer's installation instructions (2)Have all disks retrieved(3)Have smooth bores cut into
Partial wording from 13-2010 edition Dave Herbert Fire Plan Review Delray Beach Fire Rescue Sent from my iPad > On Feb 18, 2015, at 6:26 PM, John Denhardt <[email protected]> > wrote: > > No reference in NFPA 13 that I'm aware. Usually see the requirement in a > specification. You might want to look at a manufacturer's installation > instruction sheet that is part of the listing for the device. > > John > > -----Original Message----- > From: Sprinklerforum [mailto:[email protected]] > On Behalf Of JD Gamble > Sent: Wednesday, February 18, 2015 6:08 PM > To: [email protected] > Subject: Mech Tee Installation > > Does anyone know the actual Code for requiring the attachment of a drill out > to a Mech Tee? > > > > I know its good practice, but does anyone know the actual code, or is there > one? > > > > > > > > Life Safety Solutions of Sheridan > > JD Gamble > > [email protected] <mailto:[email protected]> > > (307) 763-3361 > > > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
