We inspect outside of 25 and use the following to back our findings: 2.1 General The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered part of the requirements of this document. 2.2 NFPA Publications National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 11, Standard for Low-, Medium-, and High-Expansion Foam, 2010 edition. NFPA 13, Standard for the Installation of Sprinkler Systems, 2013 edition. NFPA 13D, Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes, 2013 edition. NFPA 14, Standard for the Installation of Standpipe and Hose Systems, 2013 edition. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection, 2012 edition. NFPA 16, Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, 2011 edition. NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, 2013 edition. NFPA 22, Standard for Water Tanks for Private Fire Protection, 2013 edition. NFPA 24, Standard for the Installation of Private Fire Service Mains and Their Appurtenances, 2013 edition. NFPA 72®, National Fire Alarm and Signaling Code, 2013 edition. NFPA 101®, Life Safety Code®, 2012 edition....
Best Regards, John Allen, CET, CFPS President AFS: Allen Fire & Security Your Safety is Our Success Direct: 770.715.7261 | Office: 770.723.7280 Ext 2 | Fax: 678.894.4180 Please consider the environment before printing this email This email contains proprietary and confidential material for the sole use of the intended recipient and is the sole property of AFS. Any review, use, distribution or disclosure by others without the permission of the sender is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of the message. From: Sprinklerforum [mailto:[email protected]] On Behalf Of Brian Harris Sent: Tuesday, August 9, 2016 8:38 AM To: [email protected] Subject: RE: Combination Standpipes Travis- Building isn’t built yet but shop drawings were done and submitted for approval. (2) stories, (6) Zones, (4) stairwells, (4) remote hose valve cabinets, etc. Off the top of my head I’m thinking all the Mains will have to be reconfigured which will also affect some branchlines, new calc’s of course, most likely changes to pipe sizes, etc. Just trying to get an idea of how much additional design time will be needed for cost. Brian Harris, CET BVS Systems Inc. http://bvssystemsinc.com/ From: Sprinklerforum [mailto:[email protected]] On Behalf Of Travis Mack Sent: Tuesday, August 09, 2016 8:32 AM To: mailto:[email protected] Subject: Re: Combination Standpipes Hundreds of variables. Construction. BIM. Work installed already. Number of standpipes. Calc and pipe size changes. Travis Mack, SET MFP Design, LLC "Follow" us on Facebook: https://www.facebook.com/pages/MFP-Design-LLC/92218417692 Send large files to MFP Design via: https://www.hightail.com/u/MFPDesign Sent from my iPhone On Aug 9, 2016, at 5:20 AM, Brian Harris <mailto:[email protected]> wrote: Hypothetical question: You’ve completely designed a (2) story school, 6 zones with a pump, and now the owner/architect has decided to had combination standpipes to the job. What would be your thoughts on the amount of work involved? Brian Harris, CET BVS Systems Inc. Sprinkler Division http://bvssystemsinc.com/ Phone: 704.896.9989 Fax: 704.896.1935 _______________________________________________ Sprinklerforum mailing list mailto:[email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
