It should be recommended that an "Architect" or "Engineer of Record" should
provide you with a Code Review.
Or hire a "Fire Protection Engineer" to assist you.
Regards,
G. Tim Stone
G. Tim Stone Consulting, LLC
NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services
117 Old Stage Rd. - Essex Jct., VT. 05452
CELL: (802) 373-0638
<mailto:[email protected]> [email protected]
From: Bobby Welch <[email protected]>
Sent: Thursday, October 24, 2024 12:57 PM
To: Discussion list on issues relating to automatic fire sprinklers
<[email protected]>
Subject: [Sprinklerforum] Metal manufacturing
I have a building were they are making metal products by multiple processes
including Metal Casting of steel, Metal Forging, Additive Manufacturing and
hot rolling. Most of the building is open warehouse where they are producing
metal products with 3D printers. NFPA has metal workings listed as ordinary
hazard but also has Die Casting and Metal extruding under Extra hazard group
1. Does anyone know where I would start to figure out what hazard is
required for this building?
Bobby Welch | Sprinkler Systems Designer
KOORSEN FIRE & SECURITY
8090 N Dixie Dr, Dayton, OH 45414
P 937.641.8403 | Ext. 0318 | M 937.594.8457
[email protected] <mailto:[email protected]> | www.koorsen.com
<http://www.koorsen.com>
24x7x365 Service: 937.660.7050 | [email protected]
<mailto:[email protected]>
_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org
To unsubscribe send an email to [email protected]
