Thanks Lou for the info... All plugs are plugged in and right. As for the
keyboard I can't get another one to try, I don't want to buy another one and
find out it was not at fault. Is there a power plug to the 3.5 floppy??
Thanks

Chris BE.
"Sometimes I think the surest sign that intelligent
life exists elsewhere in the universe is that
none of it has tried to contact us."

> Hi, Chris.
> You have the keyboard plugged into the right place: it's the ADB (Apple
Desk
> Bus?).  The ADB cord can plug in either end of the keyboard; the mouse
plugs
> in the other end.  The bus with the keyboard symbol is for a PC OS-2
> keyboard.  It's supposed to be hardware supported; I've never had one to
> try.
> There are little plugs on the mother board going to the power supply.
Check
> that the numbers match.
> Also trace the wiring back from the front panel.  That would be from the
> hard power switch, the reset switch, the neon light, the speaker, and the
> fan.  If they're plugged in the wrong place you'll get no start-up.
> If I remember right, the printing on the mother board, the shape of the
> plugs, and what they're wired to, should let you sort that out.  (Having
one
> of those little plugs just plugged in on one pin and not two gave me "Dead
> Max" one time.)
> A dead keyboard can also get you: try another one.
> Hope this helped.
> Lou
>


-- 
StarMax is sponsored by <http://lowendmac.com/> and...

    /      Buy books, CDs, videos, and more from Amazon.com     \
   / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \

      Support Low End Mac <http://lowendmac.com/lists/support.html>

StarMax list info:      <http://lowendmac.com/lists/starmax.html>
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/starmax%40mail.maclaunch.com/>

Using a Macintosh? Get free email and more at Applelinks! 
<http://www.applelinks.com>

Reply via email to