On Wed, Oct 14, 2009 at 2:28 PM, Roberto Greiner <mrgrei...@gmail.com> wrote: > > At beginning of the file I have the following: > > failover peer "dhcp0" state { > my state normal at 3 2009/10/14 14:23:17; > partner state normal at 3 2009/10/14 14:13:17; > } > lease 172.16.89.254 { > starts 3 2009/10/14 17:04:35; > ends 3 2009/10/14 19:04:35; > tsfp 3 2009/10/14 20:04:35; > atsfp 3 2009/10/14 20:04:35; > cltt 3 2009/10/14 17:04:35; > binding state active; > next binding state expired; > hardware ethernet 00:0a:e4:5e:b5:a3; > } > > That IP is for the notebook I'm using for setup. > > After that, there are thousand of entries like the following: > > lease 172.16.255.254 { > starts 3 2009/10/14 14:08:33; > binding state backup; > } >
All those failover entries on that big of a scope exhaust PHP's memory limit. No way around that for the time being, I opened a bug ticket but you won't see that fixed in 1.2.x at least. Either use a smaller scope, or use something else as your DHCP server. Or send patches to fix the problem. :) --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org