If your switch 3com is a managed one, maybe you can try to setup VLANs in the switch and inside your PFsense box settings.
It's not so simple to do but it seems to be a cleaner solution. Isamar 2011/8/30 Ivanildo Galvão - IT Services <ivani...@itservices.com.br> > > Guys, need to make a single LAN network card, plugged into a switch 3com, > IP > delivery for different grinding machines that may connect to the network, > for example: > > Computers on the internal network, get the IP subnet 192.168.0.0/24 > Computers visitors entering the network, get the IP subnet 192.168.1.0/24 > > Is there any way to do this? It would be a MAC address? > > This works beautifully in another proxy that the client had was a Linux > Ubuntu, he had an eth0-1 / eth0-2 / eth0-3, Linux was sending the IP > address > according to the MAC table, that the same eth0, he could perceive only the > virtual interface eth0 (192.168.0.0/24 = 1, 2 - 192.168.1.0/24, 3 - > 192.168.2.0/24) > > The pfSense is virtualized, I tried using two NICs connected to the same > vm_network, each virtual NIC with DHCP, put each IP address tied to the mac > due, but sometimes the machines come in a network, sometimes on another > network, I need a solution urgent for a client. > > I appreciate everyone's help! > > > Ivanildo Galvão - MCP, MCT, MCSA, VSP > Consultor de Tecnologia > Tel. (84) 3201 2146 | Cel. (84) 9111 8873 > ivani...@itservices.com.br | www.itservices.com.br > Twitter: @ivanildogalvao > > > > > > > -----Mensagem original----- > De: Nicolas Roussi [mailto:nicolas.rou...@archimedean.org] > Enviada em: terça-feira, 30 de agosto de 2011 19:38 > Para: support@pfsense.com > Assunto: [pfSense Support] Traffic Shaper ? > > Hi, i am running 1.2.3 and I need some ideas on how to limit and prioritize > traffic This is the setup > > internet <---10Mbps--->MainFirewall > (NAT)<---1000Mbps--->pfSense(NAT)<----1000Mbps--->1600 wireless clients > | > | > servers > > Besides the double NATing, first I would like to make sure that traffic > that > goes to the Internet only uses 2MBps. > Second, I would like to block everything except 80,443,548, 25 and a few > other services (I can do that in the firewall settings) Third, from those > services, I would like to give priority and full bandwidth to AFP (548) > then > to web and then the rest. > > Is this possible? > > Any help is greatly appreciated. > > Thanks > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional > commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > -- Isamar Maia Cel. VIVO SSA: (55) 71-9146-8575 Cel. TIM SSA: (55) 71-9185-5264 Fixo: (55) 71-4062-8688 日本: +81-(0)3-4550-1212 Skype ID: isamar.maia