Yeah, I know it works with VLAN, but wanted to implement something simpler, the problem is that the customer had this scenario before working with Proxywith Linux and pfSense he wants to have the same solution, on Linux it had asingle NIC which was subdivided into 03 virtual eth, eth each subnet representsa ranger, according to the MAC filter stations put Linux on their respective networks.
I downloaded the version of pfSense RC3 today, here in VMware Workstationinstalled to see if I can find some option, but so far I see nothing that addressesthis need. Ivanildo Galvão - MCP, MCT, MCSA, VSP Consultor de Tecnologia Tel. (84) 3201 2146 | Cel. (84) 9111 8873 <mailto:ivani...@itservices.com.br> ivani...@itservices.com.br | <http://www.itservices.com.br/> www.itservices.com.br Twitter: @ivanildogalvao De: Isamar Maia [mailto:isa...@gmail.com] Enviada em: terça-feira, 30 de agosto de 2011 21:30 Para: support@pfsense.com Assunto: Re: [pfSense Support] Subnets in same NIC If your switch 3com is a managed one, maybe you can try to setup VLANs in the switch and inside your PFsense box settings. It's not so simple to do but it seems to be a cleaner solution. Isamar 2011/8/30 Ivanildo Galvão - IT Services <ivani...@itservices.com.br> Guys, need to make a single LAN network card, plugged into a switch 3com, IP delivery for different grinding machines that may connect to the network, for example: Computers on the internal network, get the IP subnet 192.168.0.0/24 Computers visitors entering the network, get the IP subnet 192.168.1.0/24 Is there any way to do this? It would be a MAC address? This works beautifully in another proxy that the client had was a Linux Ubuntu, he had an eth0-1 / eth0-2 / eth0-3, Linux was sending the IP address according to the MAC table, that the same eth0, he could perceive only the virtual interface eth0 (192.168.0.0/24 = 1, 2 - 192.168.1.0/24, 3 - 192.168.2.0/24) The pfSense is virtualized, I tried using two NICs connected to the same vm_network, each virtual NIC with DHCP, put each IP address tied to the mac due, but sometimes the machines come in a network, sometimes on another network, I need a solution urgent for a client. I appreciate everyone's help! Ivanildo Galvão - MCP, MCT, MCSA, VSP Consultor de Tecnologia Tel. (84) 3201 2146 <tel:%2884%29%203201%202146> | Cel. (84) 9111 8873 <tel:%2884%29%209111%208873> ivani...@itservices.com.br | www.itservices.com.br Twitter: @ivanildogalvao -----Mensagem original----- De: Nicolas Roussi [mailto:nicolas.rou...@archimedean.org] Enviada em: terça-feira, 30 de agosto de 2011 19:38 Para: support@pfsense.com Assunto: [pfSense Support] Traffic Shaper ? Hi, i am running 1.2.3 and I need some ideas on how to limit and prioritize traffic This is the setup internet <---10Mbps--->MainFirewall (NAT)<---1000Mbps--->pfSense(NAT)<----1000Mbps--->1600 wireless clients | | servers Besides the double NATing, first I would like to make sure that traffic that goes to the Internet only uses 2MBps. Second, I would like to block everything except 80,443,548, 25 and a few other services (I can do that in the firewall settings) Third, from those services, I would like to give priority and full bandwidth to AFP (548) then to web and then the rest. Is this possible? Any help is greatly appreciated. Thanks --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org -- Isamar Maia Cel. VIVO SSA: (55) 71-9146-8575 Cel. TIM SSA: (55) 71-9185-5264 Fixo: (55) 71-4062-8688 日本: +81-(0)3-4550-1212 Skype ID: isamar.maia
<<image003.jpg>>