Hello Jon, Monday, July 28, 2008, 1:20:25 PM, you wrote:
J> Also try PortMon from Sysinternals J> (http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx) to debug. I am trying right now and there is one thing that is very confusing to me. The first time I run portmon after a reboot under Capture/Ports I find the following items: COM1: Serial0 COM5: Serial2 LPT1: Parallel0 Now I deactivate the COM1 and LPT1 so I capture only the packets from COM5. Everything runs ok. Now I close portmon and the test unit, disconnect the adapter, reconnect and run portmon again. Much to my surprise under Capture/Ports now I find 2 COM5, one identified as Serial2 and the other as Serial4. With portmon still hooked to the COM5/Serial2 I don't see anything captured, but if I select the new pair COM5/Serial4 I get some captures although it appears to be slightly different from the previous case, this is the case where the test unit does not receive anything from the serial port. Now with portmon and the test unit closed I disc/reconn again and now I have a third pair, COM5/Serial6. If I try again the disc/reconn phase now the pair COM5/Serial6 has disappeared while I have now a new COM5/Serial7 item. ---------------------------- Famous Sport Quotes: "This evening is a very different evening from the morning that we had this morning" David Coleman, BBC ---------------------------- Steve IK4WMH ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ synalist-public mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/synalist-public
