The BC637PCI already have a VCXO onboard, but you add a OCXO on the
outside to get much better results.
It was the original poster that needed help.
My problems with the BC637PCI was that one of my boards didn't respond
completely as documented.
Cheers,
Magnus
On 07/02/14 05:37, Alex Pummer wrote:
Hi Magnus,
I could help you with that,
I also looking for a GPS module which has a 10kHz output,
To lock to the 1pps is a bit complicated, one would need a crystal
oscillator with very good short-time stability, with a 10kHz is just an
analog PLL, for what would you use the output -- what frequency do you
need?
Regards
Alex
73
KJ6UHN
On 2/6/2014 8:05 PM, Magnus Danielson wrote:
On 07/02/14 00:18, d0ct0r wrote:
Hello,
Does anybody seen any links to the information how to implement external
OCXO to Symmetricom PCI TFP BC635/BC637 ?
As I recall it, it's fairly straigh-forward to output the EFC and
input the clock frequency. I also recall that there is a API for
changing the PI-filtering parameters.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
