JohnSwenson;609446 Wrote: > The Nuforce uDAC uses a 16 bit USB receiver, you will either have to use > the plug interface (see the first post in the thread) or set samplebits > to 16. I have no idea what is going to happen inside the Touch when you > set it to 16, I've never tried. > > The whole volume architecture on the Touch is assuming its using a 24 > bit DAC. If you leave the samplebits set to 24 you will HAVE to use the > plug interface. > > In either case it highly recommended to leave the volume control set to > 100%, anything less and you will be losing bit resolution with a 16 bit > DAC. > > You are probably much better off using the Touch analog outs rather > than this DAC. > > John S. Thanks John.
How about the uDAC2 which is 24bit and uses the Sabre32 DAC? Not sure what DAC does the Touch uses and whether if there's any improvement in sound quality when connected to the uDAC2? -- wyvern ------------------------------------------------------------------------ wyvern's Profile: http://forums.slimdevices.com/member.php?userid=43874 View this thread: http://forums.slimdevices.com/showthread.php?t=82110 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
