JohnSwenson wrote: > I'm not an expert on IR Blaster, I've tested it to make sure it works > but that is as far as I've gotten. If my understanding is correct raw > mode is very low level information on how the IR beam is modulated. But > this is a large sequence of information for each button. There are > several standards for how IR data is encoded, these allow you to have a > short set of characters to represent what gets sent. Most manufacturers > publish these encodings (or at least users have figured out what they > are), you can type these into the IRBlaster config file. Unfortunately I > think the learning feature of IR Blaster uses raw mode, it just records > exactly what's happening with the IR beam without figuring out what the > encoding is. So unfortunately you probably cannot just directly use > those learned "button pushes" with the Touch. > > All is not lost though. If you can find out what the "codes" are for the > devices you wish to control, you can put THOSE into the config file and > it should work. There are several web sites that maintain massive > databases of such control codes, so the probability of finding them is > pretty high. > > John S.Thanks John, Guess I'll cross that bridge if/when I need to.
Doug ------------------------------------------------------------------------ TechHome's Profile: http://forums.slimdevices.com/member.php?userid=2340 View this thread: http://forums.slimdevices.com/showthread.php?t=94827 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch