Hi
Please could someone advise me how to set up picoreplayer 4.0.0 to "see" a btrfs SATA ssd fitted into a sata/usb adaptor. The drive performs fine connected to my Linux mint system, and I have downloaded my music library to it. I Connected the drive to Picoreplayer, and added the extension filesystems-4.14.56-pcpCore-v7.tcz. (extension shows as installed, info shows a btrfs kernel module). Rebooted but it does not appear on the LMS page, as an external drive and dmesg states;- 682.347086] not responding... [ 862.381258] sd 0:0:0:0: timing out command, waited 180s [ 1042.421263] sd 0:0:0:0: timing out command, waited 180s [ 1222.431259] sd 0:0:0:0: timing out command, waited 180s [ 1222.431308] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 [ 1222.431315] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 1222.431321] sd 0:0:0:0: [sda] ASC=0x44 <<vendor>>ASCQ=0x81 [ 1402.451261] sd 0:0:0:0: timing out command, waited 180s [ 1582.491262] sd 0:0:0:0: timing out command, waited 180s [ 1582.491315] sd 0:0:0:0: [sda] Attached SCSI disk [ 2556.266536] usb 1-1.4: USB disconnect, device number 5 [ 2563.980870] usb 1-1.4: new high-speed USB device number 6 using dwc_otg [ 2564.191827] usb 1-1.4: New USB device found, idVendor=152d, idProduct=0578 [ 2564.191833] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2564.191838] usb 1-1.4: Product: USB to ATA/ATAPI Bridge [ 2564.191842] usb 1-1.4: Manufacturer: JMicron [ 2564.191846] usb 1-1.4: SerialNumber: 0123456789ABCDEF [ 2564.192312] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 2564.192481] usb-storage 1-1.4:1.0: Quirks match for vid 152d pid 0578: 1000000 [ 2564.192814] scsi host0: usb-storage 1-1.4:1.0 [ 2565.271309] scsi 0:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6 [ 2575.301264] sd 0:0:0:0: [sda] Spinning up disk... [ 2578.390946] . [ 2585.430867] . [ 2592.470865] . [ 2599.510864] . [ 2606.550864] . I can find no info on this configuration, so I have a couplle of questions:- Will this configuration work? How do I get it to work? many thanks P ------------------------------------------------------------------------ superpat999's Profile: http://forums.slimdevices.com/member.php?userid=9340 View this thread: http://forums.slimdevices.com/showthread.php?t=109404 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
