superpat999 wrote: > Hi > > Please could someone advise me how to set up picoreplayer 4.0.0 to > "see" a btrfs SATA ssd fitted into a sata/usb adaptor. > > The drive performs fine connected to my Linux mint system, and I have > downloaded my music library to it. > > I Connected the drive to Picoreplayer, and added the extension > filesystems-4.14.56-pcpCore-v7.tcz. (extension shows as installed, info > shows a btrfs kernel module). > > Rebooted but it does not appear on the LMS page, as an external drive > and dmesg states;- > > 682.347086] not responding... > [ 862.381258] sd 0:0:0:0: timing out command, waited 180s > [ 1042.421263] sd 0:0:0:0: timing out command, waited 180s > [ 1222.431259] sd 0:0:0:0: timing out command, waited 180s > [ 1222.431308] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: > hostbyte=0x00 driverbyte=0x08 > [ 1222.431315] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] > [ 1222.431321] sd 0:0:0:0: [sda] ASC=0x44 <<vendor>>ASCQ=0x81 > [ 1402.451261] sd 0:0:0:0: timing out command, waited 180s > [ 1582.491262] sd 0:0:0:0: timing out command, waited 180s > [ 1582.491315] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2556.266536] usb 1-1.4: USB disconnect, device number 5 > [ 2563.980870] usb 1-1.4: new high-speed USB device number 6 using > dwc_otg > [ 2564.191827] usb 1-1.4: New USB device found, idVendor=152d, > idProduct=0578 > [ 2564.191833] usb 1-1.4: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2564.191838] usb 1-1.4: Product: USB to ATA/ATAPI Bridge > [ 2564.191842] usb 1-1.4: Manufacturer: JMicron > [ 2564.191846] usb 1-1.4: SerialNumber: 0123456789ABCDEF > [ 2564.192312] usb-storage 1-1.4:1.0: USB Mass Storage device detected > [ 2564.192481] usb-storage 1-1.4:1.0: Quirks match for vid 152d pid > 0578: 1000000 > [ 2564.192814] scsi host0: usb-storage 1-1.4:1.0 > [ 2565.271309] scsi 0:0:0:0: Direct-Access JMicron Generic > 0508 PQ: 0 ANSI: 6 > [ 2575.301264] sd 0:0:0:0: [sda] Spinning up disk... > [ 2578.390946] . > [ 2585.430867] . > [ 2592.470865] . > [ 2599.510864] . > [ 2606.550864] . > > I can find no info on this configuration, so I have a couplle of > questions:- > > Will this configuration work? > > How do I get it to work? > > many thanks > > P
HI, No it is nothing to do with power supplies. I found a tiny note on the PIcoreplayer website that there needs to be a prerequisite extension installed -- raid-dm-4.14.56-pcpCore_V7.tcz So I installed the raid extension, but looking at installed extension info, there is an error;- filesystems-4.14.56-pcpCore_v7.tcz 3858432, 3.68 MB raid-dm-KERNEL.tcz Error, not found ---- But I have just installed this extension! So at this point I gave up with btrfs , wiiped my ssd, reformatted it ext4, and reloaded my music. Installing the ssd now, it can be seen as an external usb drive ok. HOWEVER I cannot find any way of setting the fstab parameters to stop journalling or time stamps to save wear on the ssd, (which is why I wanted to use btrfs at first !) Please how do I adjust the fstab paramets on the mount ? cheers P ------------------------------------------------------------------------ superpat999's Profile: http://forums.slimdevices.com/member.php?userid=9340 View this thread: http://forums.slimdevices.com/showthread.php?t=109404 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix