Hi Konstantin, After setting the NIC to be Bridged for the VM from VirtualBox, you need to start the VM, then within the System Settings -> Network of the VM, manually set the NIC to have a static IP address.
Regards, Nate Temple > On Aug 3, 2017, at 11:50 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN > TECHNOLOGIES INC] <konstantin.j.math...@nasa.gov> wrote: > > The Software does not allow me to do that.. Here is a screen shot.. This is > all that it offers… > > <image001.png> > > -----Original Message----- > From: Nate Temple [mailto:nate.tem...@ettus.com] > Sent: Thursday, August 03, 2017 2:48 PM > To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] > <konstantin.j.math...@nasa.gov> > Cc: Philip Balister <phi...@balister.org>; usrp-users@lists.ettus.com > Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password Issue > > Hi Konstantin, > > When operating in bridged mode, did you manually set the (static) IP address > within your VM? > > Regards, > Nate Temple > > > On Aug 3, 2017, at 11:27 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN > > TECHNOLOGIES INC] <konstantin.j.math...@nasa.gov> wrote: > > > > Nate, > > > > As soon I put it into bridged mode, nothing works.. What I mean is that I > > am not able to communicate/ping to the E310 that way. > > > > It may work maybe for other VM software, but again, I am using Oracle > > VirtualBox. > > > > Thanks > > > > -----Original Message----- > > From: Nate Temple [mailto:nate.tem...@ettus.com] > > Sent: Thursday, August 03, 2017 1:37 PM > > To: Philip Balister <phi...@balister.org> > > Cc: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] > > <konstantin.j.math...@nasa.gov>; usrp-users@lists.ettus.com > > Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password > > Issue > > > > Hi Konstantin, > > > > You may want to try putting your VM into a Bridge Network mode. There may > > be an issue with the NAT routing. If operating in Bridged mode, ensure your > > Host, VM and E3xx all have different IP addresses. > > > > Regards, > > Nate Temple > > > > > > > >> On Aug 3, 2017, at 9:39 AM, Philip Balister via USRP-users > >> <usrp-users@lists.ettus.com> wrote: > >> > >> On 08/03/2017 11:07 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN > >> TECHNOLOGIES INC] via USRP-users wrote: > >>> Hello All, > >>> > >>> I have the E310 hooked up with an Ethernet wire, and I can ping from my > >>> Linux Ubuntu Virtual machine (created by Oracle VirtualBox software). > >>> > >>> But when I try to SSH, I did get access denied.. until I added a VM rule > >>> for port 22 in Network Settings of the VM. > >>> > >>> But now I get the password message in the Linux terminal to place a > >>> password. As we know, the password is empty per the instructions on the > >>> website. > >> > >> Did you hit return to see if it gave you a prompt? > >> > >> Philip > >> > >>> > >>> So I went into ssh_config file in Linux at ect/ssh and altered a > >>> line that allows for no passwords... This is the site.. > >>> http://developer.toradex.com/knowledge-base/ssh > >>> > >>> But I am still not getting past the password login. > >>> > >>> Is there any other advice you can give me? > >>> > >>> Thanks, > >>> > >>> Konstantin > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> USRP-users mailing list > >>> USRP-users@lists.ettus.com > >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >>> > >> > >> _______________________________________________ > >> USRP-users mailing list > >> USRP-users@lists.ettus.com > >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com