Okay. I’ve asserted from the outset that it’s a rev 2, based on the factory label. Is this N210 a lost cause if it is actually a Rev2 N210?
Joe > On May 9, 2019, at 2:05 PM, Nick Foster <bistrom...@gmail.com> wrote: > > Well, it's not a rev 4. It's either 2 or 3 in terms of hardware revision. > > On Thu, May 9, 2019 at 12:58 PM Joe Martin <k...@k5so.com > <mailto:k...@k5so.com>> wrote: > …able to ping 192.168.10.2 successfully. > >> On May 9, 2019, at 1:54 PM, Joe Martin <k...@k5so.com >> <mailto:k...@k5so.com>> wrote: >> >> Ian, >> >> Yes, I have tried many times to boot in safe mode, same result regardless. >> Yes, I am able to pin to 192.168.10.2 successfully. >> >> Joe >> >>> On May 9, 2019, at 1:47 PM, Joe Martin via USRP-users >>> <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote: >>> >>> Ian and Nick, >>> >>> Thanks for the assistance. Attached are dropbox links to two snapshot >>> photos: 1) the factory label on the back of the N210, showing N210 r:2.0 >>> and 2) a top side view of the N210. >>> >>> 1) https://www.dropbox.com/s/u92x02rni71kfb3/20190509_133253.jpg?dl=0 >>> <https://www.dropbox.com/s/u92x02rni71kfb3/20190509_133253.jpg?dl=0> >>> 2) https://www.dropbox.com/s/1p8ocqf4qcr9ohb/20190509_133800.jpg?dl=0 >>> <https://www.dropbox.com/s/1p8ocqf4qcr9ohb/20190509_133800.jpg?dl=0> >>> >>> Seems this unit is indeed a rev 2 N210, yes? >>> >>> Joe >>> >>>> On May 9, 2019, at 12:40 PM, Nick Foster <bistrom...@gmail.com >>>> <mailto:bistrom...@gmail.com>> wrote: >>>> >>>> Moreover, the best "tell" is to look at the N210 motherboard. If the SRAM >>>> chip is on the top side, it's a rev 2/3. If the SRAM is on the bottom >>>> side, it's a rev 4. If you send a picture along of the top of the N210, I >>>> can tell you if it's early or late rev. >>>> >>>> On Thu, May 9, 2019 at 11:36 AM Ian Buckley via USRP-users >>>> <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote: >>>> Joe, >>>> So I scratched my head about this a little late last night and looked back >>>> through the development repository for the N210 and as far as I can tell >>>> there was never customer facing FPGA code for a Rev2 N210. Chatting with >>>> Matt this morning he shared my feeling that a Rev2 wasn't sold to >>>> customers, so I'm curious if you have a unit that has a factory label that >>>> says N210Rev2 or if you have seen "usrp2 rev2.0" on the PCB (which can be >>>> missleading). >>>> >>>> Also have you tried booting into the safe image and verifying that it at >>>> least pings on 192.168.10.2? >>>> >>>> If we can conclusively identify which rev of h/w you have I can probably >>>> help further. >>>> >>>> Ian >>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com> >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com