per...@o2.pl wrote: > Hello, > > It seems that I have to answer my own question. Currently I succeeded to get > 245.76MSamp/s in benchmark_rate for single channel with DPDK over single > 10Gbit link for an RFSoC device similar to USRP X410. > > My setup: > > * UHD 4.3, Ubuntu 20.04, DPDK 19.11 installed from packages > > * command: benchmark_rate --rx_subdev "A:0" --rx_channels 0 > --args="addr=192.168.10.2,mgmt_addr=192.168.0.39,use_dpdk=1" --rx_rate > 245.76e6 > > * Hardware: AMD Ryzen Threadripper 2990WX, 128GB RAM, motherboard Asus X399 > > This is not a mind-blowing rate, because I’m able to get quite stable 245.76 > MSamp/s without DPDK. > > But it is a good start taking into account number of different strange steps > during DPDK installation and setup and very poor performance at the beginning. > > Solutions to some issues were totally counterintuitive. I.e. in the end I > still had one \~oveflow per second at 245.76MSamp rate. The solution was to > run the program WITHOUT root rights/sudo (what requires additional steps that > were described by Rob Kossler). > > —\ > Best Regards,\ > Piotr Krysik > > Piotr Krysik wrote: > > > Hello all, > > > > Has anybody tried to use DPDK with USRP X410? > > > > If yes - can you share what was maximal sample rate for a single channel > > that you were able to stream over 10G or 100G Ethernet connection > > without loss and what was your setup (hardware and software)?
Little update: currently with the same setup but with different clocks configuration I can record 256MS/s. This is with use of single 10GbE connection. I can’t use multiple connections simultaneously to transfer more channels with maximum rate yet. If someone tried that with USRP X410 I would be grateful for information how it worked (or didn’t work). Best Regards,\ Piotr Krysik
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com