Well, to get the floppy out, there should be a little hole by the slot
where you put the disk in, if you poke a paperclip (bent straight) or
a small screwdriver in and push, it should pop the disk out (unless
it's stuck in the drive because the mechanism broke) As for the
monitor, if it is unplugged, you'll have to take the case off to plug
it back in. You can probably find a disassembly guide on the internet,
or someone here with one could give you more info. (Just be careful if
you do, some of the monitor components are high voltage) Hope that
helps!
-Cyrus
> Here's my problem: 1) A floppy was put into the disk drive (by me,
> when doing a routine post-transaction test of the slots) and now it
> won't come out. Is there a way to get the floppy out without opening
> the Mac? I am new to this style of machine, so please help!
> 2)The screen will not turn on. (I can hear the machine turning on.)
> What should I do? (I believe that the monitor was disconnected from
> the rest of the inner workings during standard flat rate shipping.)
>
> Any help appreciated!
>
> Otsiam43095
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
