i did a pretty neat job to begin with but i took your advice and used the 
rubbing alcohol on the head.  im having a tough time locating a source for 3.5 
inch floppies around here (toronto canada)
 

________________________________
 From: Gregg Eshelman <[email protected]>
To: [email protected] 
Sent: Saturday, May 26, 2012 4:34:41 AM
Subject: Re: Mac 512k diskette drive requires slight prying of diskette during 
ejection.
  
Use some rubbing alcohol on a cotton swab to carefully clean the drive's heads 
before you put a disk in. Better would be the alcohol on a cleaning disk if you 
have one. Of course let the alcohol evaporate before inserting a disk.

You don't want any WD-40 that may have spattered onto the heads getting onto 
disks.

--- On Fri, 5/25/12, Daniel Pereira <[email protected]> wrote:

i used compressed air then sprayed a bit of WD40 into the moving parts and used 
some silicone after it dried up it appears to be moving in a way i didn't think 
it could.  i guess the dust just clogged it up over time.  haven't put her back 
together yet, because im doing a retrobrite treatment to my set up.  looking 
good so far. 
--  ----- You received this message because you are a member of the Vintage 
Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and 
our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To 
post to this group, send email to [email protected] To leave this 
group, send email to [email protected] For more 
options, visit this group at http://groups.google.com/group/vintage-macs   
Support for older Macs: http://lowendmac.com/services/   

-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/

Reply via email to