In krivit’s video the bucket is removed for around 30seconds, not few minutes.
From 11:10 to 11:20 and from 11:26 to 11:46 (SEE KRIVIT’S VIDEO)
And the water flow can’t be 7 liter/h since the pump is pumping every 2.5-3
seconds, so the true water flow is lower than 3 liter/h
LMI P18 pump has a maximum flow of 12 l/h at 100 strikes/minutes. With 25
strikes/minute is (maximum) 3 l/h. It can be lower than 3 liter/h.
From: Jed Rothwell
Sent: Tuesday, August 23, 2011 10:32 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Rossi Steam Quality Updates
Horace Heffner <hheff...@mtaonline.net> wrote:
This does not happen with the eCat, as shown in the videos made by Lewan.
How is it shown by Lewan's videos that water does not overflow from the E-Cat?
In some of the videos he showed the hose removed from the bucket for a few
minutes with steam emerging. There were no periodic slugs of water (or
"percolating") during this time. As Alan Fletcher points out, at 7 L/h and only
800 W there should be percolating every 7 s or so, and at 5 L/h it should
happen roughly every 30 s, assuming it works like the Cantwell simulation. Even
if these numbers are off, there would be some percolation.
- Jed
