Thanks Robert I appreciate your advice Are you building ?
> Date: Tue, 20 Dec 2011 12:23:20 +0000 > Subject: Re: [Vo]:Phen formula from ecatbuilder.com > From: robert.gulliver.l...@gmail.com > To: vortex-l@eskimo.com > > Things to consider: > 1/ Probably want to make sure that the hydrogen you are being supplied > is a reasonably high purity 'technical' grade. > 2/ Most researchers use multi-stage vacuum pumps to achieve high > vacuum, you probably want to buy a 2-stage vacuum pump such as used by > HVAC technicians (you need high vacuum to evaporate and remove some of > the contaminants you are trying to remove). > 3/ Keep all of your valves, connectors, joints, seals, and > feed-throughs away from hot areas in the test vessel. > 4/ Do some reading on handling hydrogen. Hot pressurised hydrogen is > dangerous - exceptionally flammable and explosive. Best to do > experimenting in covered outdoors area where hydrogen can't > accumulate, and use small tubes that don't permit too much flow. Keep > hydrogen tank under cover and outside. > 5/ Calorimetry is hard. It takes a lot of detailed effort to get good > results when you are looking for small gains - and you won't be able > to tell if anything is happening without it. You need a data > acquisition system with at least 3 thermocouples for this work. > > > On 20 December 2011 06:53, Peter Brosnan <ddc...@hotmail.com> wrote: > > Thanks Ron and Hoyt . I appreciate your help and Yes after phone calls , > > Hydrogen tank $90 at 2000 psi > > > > Have to rent the tank and ordering Regulator as we speak > > > > Can buy a Vacum pump 1.5 cfm $90 or > > > > 6.0 cfm $150 > > > > Anybody understand if the 1.5 would be enough ? > > > > Intend to follow Phens formula first > > > > Anybody here experimented with what he stated ? > > > > > > > >> Date: Mon, 19 Dec 2011 22:18:38 -0700 > >> From: prot...@frii.com > > > >> To: vortex-l@eskimo.com > >> Subject: RE: [Vo]:Phen formula from ecatbuilder.com > >> > >> I think you can buy it in a pressurized tank with a regulator from gas > >> suppliers. > >> > >> > >> On Tuesday, December 20, 2011 11:53 AM +1000 Peter Brosnan > >> <ddc...@hotmail.com> wrote: > >> > >> > > >> > > >> > Hi Guys , Pete from Australia here , I just found your site and joined > >> > up . I got interested in > >> > Phen as well > >> > > >> > Phen talks about "The chamber is pressurized with hydrogen to 2000 psi > >> > and heated to 200 C " > >> > > >> > > >> > I'm trying replicate this stuff, got some of the gear here already , the > >> > rest is coming . > >> > > >> > > >> > The Hurdle is how do I pressureize my H2 at 2000 psi . Most of the Gas > >> > compressor I've seen > >> > are $5000 + ( To rich for my blood ) > >> > > >> > > >> > One guy I read adapted his frigeration compressor for 600 psi > >> > > >> > > >> > Any ideas guys > >> > > >> > > >> > Thanks Pete > >> > > >> > > >> > > >> > > >> > __________________________________________________ > >> > Date: Mon, 19 Dec 2011 23:05:44 -0200 > >> > Subject: Re: [Vo]:"Private information" about Rossi was the Ampernergo > >> > tests described by McKubre > >> > From: besantos1...@gmail.com > >> > To: vortex-l@eskimo.com > >> > > >> > Yugo... must be serbian! (or croatian...slovenian...macedonian...) > >> > > >> > > >> > Just kidding. :-) > >> > > >> > > >> > No matter what, I like your skepticism. Even though, to me, it seems to > >> > be a lot of evidences > >> > pro-CF, it helps keeping our feet on the ground. > >> > > >> > > >> > > >> > > >> > > >> > > >> > 2011/12/19 Mary Yugo <maryyu...@gmail.com> > >> > > >> > > >> > > >> > > >> > > >> > On Mon, Dec 19, 2011 at 2:24 PM, Giovanni Santostasi > >> > <gsantost...@gmail.com> wrote: > >> > > >> > Jed, > >> > I'm not sure what is the ethnic origin of Mary. > >> > > >> > > >> > > >> > Sorry, not Italian. > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > >> > >> >