Router Config I am going to use Vyatta with a Time Warner fiber connection I have 28 addresses assigned to us as follows (ip's changed for sake of security) on ethernet 0 (2 subnets) set interfaces ethernet eth0 address 111.1.1.30 prefix-length 28 set interfaces ethernet eth0 address 111.1.1.45 prefix-length 28 on ethernet 01 (subnet gateway to Timewarner) set interfaces ethernet eth1 address 222.2.1.98 prefix-length 30 Default Route set protocols static route 0.0.0.0 0.0.0.0 next-hop 222.2.1.97 Basically is this all I really need to route in and out, and am I correct in my assumptions? Also should I declare nameservers entrys? I do not want to use any firewall rules, just simple routing.. I know I want ssh access in etc, but I understand that, I almost need to test this live, and am trying to make sure I am on the right path here. Jeff
_______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users