The wanpipe error is because you don't have any t1/e1/t3 interaces, it will always happen unless you install one, don't worry about it. I always get the ipsec deault route thing as well, I think its because there are no VPN tunnels up. It doesn't mean you don't have a 0/0 route. Hope this helps. :)
------------------------------- Aubrey Wells (mobile) Senior Engineer Shelton | Johns Technology Group sheltonjohns.com -----Original Message----- From: "Jeff" <[EMAIL PROTECTED]> To: vyatta-users@mailman.vyatta.com Sent: 9/15/07 11:58 AM Subject: Re: [Vyatta-users] Am I right on this config didn't scream at me that way... I commit then save and reboot But on reboot I see the message on ipsec_setup defaultroute cannot cope!!!! and also this one Starting Wan Interfaces: FATAL Error Inserting wanpipe (/lib/modules/2.6.20/kernel/drivers/net/wan/wanpipe.ko) No such Interface As I said nothing is plugged in yet, to the intefaces purely jsut test enviroment at present so not sure if this has anything to do with anything or not, but if i plug hub in interfaces become green light, but did not take it any further on pinging, etc Thanks Jeff _____ From: Allan Leinwand [mailto:[EMAIL PROTECTED] To: Jeff [mailto:[EMAIL PROTECTED] Cc: Sent: Sat, 15 Sep 2007 11:02:11 -0400 Subject: Re: [Vyatta-users] Am I right on this config Hi Jeff, Try "set protocols static route 0.0.0.0/0 next-hop 222.2.1.97". We use CIDR equivalents format for netmasks (examples here on wikipedia: http://en.wikipedia.org/wiki/Classful_network). Take care, Allan ----- Original Message ----- From: "Jeff" <[EMAIL PROTECTED]> To: vyatta-users@mailman.vyatta.com Sent: Saturday, September 15, 2007 7:52:04 AM (GMT-0800) America/Los_Angeles Subject: Re: [Vyatta-users] Am I right on this config below was wrongly typed it was as follows (Sorry) Its displays ERROR: argument "0.0.0.0" is not Valid. Allowed type(s): "IPv4Net" or "IPv6Net" _____ From: Jeff [mailto:[EMAIL PROTECTED] To: vyatta-users@mailman.vyatta.com Sent: Sat, 15 Sep 2007 10:43:56 -0400 Subject: Re: [Vyatta-users] Am I right on this config Ok one problem when i enter set protocols static route 0.0.0.0 0.0.0.0 next-hop 222.2.1.97 Its displays ERROR: argument "0.0.0" is not Valid. Allowed type(s): "IPv4Net" or "IPv6Net" What am I doing wrong? Jeff _____ From: Jeff [mailto:[EMAIL PROTECTED] To: vyatta-users@mailman.vyatta.com Sent: Fri, 14 Sep 2007 10:46:08 -0400 Subject: Re: [Vyatta-users] Am I right on this config ok all thanks will enter this config and see what happens _____ From: Justin Fletcher [mailto:[EMAIL PROTECTED] To: Jeff [mailto:[EMAIL PROTECTED] Cc: vyatta-users@mailman.vyatta.com Sent: Fri, 14 Sep 2007 10:15:21 -0400 Subject: Re: [Vyatta-users] Am I right on this config Yes, looks about right, but I'd make one change. As those two /28s are contiguous, I'd change eth0 to to set interface ethernet eth0 address 111.1.1.30 prefix-length 27 which covers the same address range but only uses one of your allocated addresses. Personally, I always like having a name server configured - it can make diagnostics a bit easier. Best, Justin On 9/14/07, Jeff <[EMAIL PROTECTED]> wrote: > > > Router Config > I am going to use Vyatta with a Time Warner fiber connection > > I have 28 addresses assigned to us > > as follows (ip's changed for sake of security) > > on ethernet 0 (2 subnets) > set interfaces ethernet eth0 address 111.1.1.30 prefix-length 28 > > set interfaces ethernet eth0 address 111.1.1.45 prefix-length 28 > > > on ethernet 01 (subnet gateway to Timewarner) > set interfaces ethernet eth1 address 222.2.1.98 prefix-length 30 > > Default Route > set protocols static route 0.0.0.0 0.0.0.0 next-hop 222.2.1.97 > > Basically is this all I really need to route in and out, and am I correct in > my assumptions? > Also should I declare nameservers entrys? > I do not want to use any firewall rules, just simple routing.. > > I know I want ssh access in etc, but I understand that, I almost need to > test this live, and am trying to make sure I am on the right path here. > > > Jeff > > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users