Hi Adrian, Sounds to me like you are trying to record NTSC output on a PAL VCR.
The VCR may be able to play NTSC tapes or display the incoming NTSC signal but it may not be able to lay the signal down on tape. If it is possible to change that dip to PAL your problem may disappear. Good luck Paul Adrian Skehan wrote: > Its got me beat! I have been trying to upload an iMovie (v 2.1.2) to a > VCR using a Canopus ADVC-100. > > Firewire cable from the iMac (OS v10.2.1) to the front panel of the > ADVC-100, ADVC-100 dips' set to: > Video Format, NTSC Setup Level, Locked Audio Mode, Audio Mode and > Power-On Input Mode all set to OFF; and Input selector Mode set to ON > > Input selector indicator shows "Digital In" (Blue Light on) > > Color coded cables from Video and Audio OUT plugs on the back of the > ADVC-100 to the Video/Audio IN plugs on the front of the VCR > > VCR channel set to L2 (The VCR book (Sharp VC-H610x) gives this as the > connection/setup for a Camcord) > > iMovie recognises that a camera is connected > > Select Export Movie -- To Camera -- it starts to play OK > > Press record on the VCR and it does what it normally does when recording > > All I get is a recording of the AUDIO but NO picture on both the TV > Monitor during the recording process (just a blue screen) and the same > on the tape > > I am unable to play the iMovie on the Computer and monitor it on the TV > when not recording > > I will appreciate any suggestions. > > Regards > > Adrian Skehan > > ________________________________________________________ > www.cosmic.com.au/skehan > I love my iMac > > [Non-text portions of this message have been removed] > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.html> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.html> > Unsubscribe - <mailto:[EMAIL PROTECTED]> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
