done. i'm running a screen bash weewx session and monitor it until it stop. thanks.
My config is pretty standard for rpi2. i install a raspbian image from raspberry pi foundation website i install tight vnc server (not needed if i had done the jessie upgrade before) and then upgrade to the last jessie release. after that i just follow weewx doc and wiki to run a sofaskin on local webserver in a ram disk to avoid overwriting on mys sd card and remote ftp server. external mysql (for the same reason) and forecast extension. for the syslog i did try to syslog to my ubuntu linux server as describe in weewx wiki to save writing on the rpi sd card but came back to original syslog config because it was apparently still writing into the local syslog file in top of the remote syslog... i had weewx stop reporting randomly from the beginning, before i did change the skin or forecast extension or sys log modification.... i did change the rpi2 board with the same model. i will now setup a dev config with a rpi3 board and the simulator as weather station. right now, i keep this config running like that just if it is useful for the community to help debugging the software if it's hardware related i don't see the point to maintain a buggy system and i'll keep it up running until i can validate my new rpi3 dev platform to switch it in prod platform. On Wednesday, December 28, 2016 at 9:14:26 AM UTC+7, Marc Aubry wrote: > > hi > do i have to rename it wh23xx.py in /usr/share/weewx/user > or i just copy it like that. > i guess that i have to rename it :) > > > > On Wednesday, December 28, 2016 at 8:26:32 AM UTC+7, mwall wrote: >> >> marc, >> >> the problem is that pyusb/libusb should timeout when a write/read fails, >> but that is not happening. but if the write/read is not failing, why are >> we suddenly not getting any logging? >> >> this really smells like a hardware problem, or perhaps something with >> your system's logging configuration. >> >> try the attached wh23xx-0.8p1.py >> >> it does non-debug logging before and after every interrupt write to the >> usb. >> >> m >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
