Reason for my speculation: at the HWA-forum several people already using WeeWx for years with the original HWA-template, *probably* started & still operating with Python2.x, and never heard complaints about the template.
That triggers another aspect: when issuing for the HWA-Forum this updated version of the template, some advice must be given that (backwards) application with Python2.x must be checked. Best to give this template-version and also the older version a related, distinguishing name. Op zondag 2 mei 2021 om 23:33:32 UTC+2 schreef Ton vanN: > Peter, that was the hint required! > The HWA-template now has become active. > > Speculation, but could this be an aspect of changing from Python2.x to > Python3.x? > > > Op zondag 2 mei 2021 om 23:06:42 UTC+2 schreef peterq...@gmail.com: > >> Looks like that could be it. The .formatted is turning the barometer >> value into a string and comparing it against zero, which is an int. Might >> try >> >> $trend.barometer.raw > 0 >> >> I would have thought that Python would have cast the string into an int >> for you, but apparently not. >> >> On Sun, May 2, 2021 at 1:45 PM Ton vanN <ton...@gmail.com> wrote: >> >>> The error report for the HWA-template is like >>> >>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>> weewx.cheetahgenerator: **** Ignoring template >>> /home/weewx/skins/Standard/openweerdata.htm.tmpl >>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>> weewx.cheetahgenerator: **** Reason: '>' not supported between instances of >>> 'str' and 'int' >>> >>> That seems to point to the section in the template which determines >>> barotrend >>> with first scriptlines >>> >>> #if $trend.barometer.formatted > 0 >>> \$barTrend = "Rising"; >>> #end if >>> >>> *Not* *[?]* to the earlier section which translates windDir.raw into >>> windDirection, because those scriptlines have 'real' values for comparison >>> >>> #if $current.windDir.raw >= 11.25 and $current.windDir.raw < 33.75 >>> \$windDirection = "NNO"; >>> >>> Apparently some tiny detail which differentiates a comparison with >>> integer value and a comparison with real value: >>> *or* is the problem in the lefthandside of the comparison? >>> Op zondag 2 mei 2021 om 21:29:59 UTC+2 schreef Ton vanN: >>> >>>> That aspect of /home/weewx/skin/basic now solved. >>>> Related question: solution also applicable for v4.5? >>>> >>>> Now focus on finding solution for HWA-template. >>>> >>>> Op zondag 2 mei 2021 om 17:26:42 UTC+2 schreef tke...@gmail.com: >>>> >>>>> It looks like the example skin "basic" has a few issues. To get it to >>>>> work, go into basic/index.html.tmpl and change this >>>>> >>>>> <div id='data_table'> >>>>> #include $Extras.current >>>>> <p> </p> >>>>> #include $Extras.hilo >>>>> </div> >>>>> >>>>> to this >>>>> >>>>> <div id='data_table'> >>>>> #include "current.inc" >>>>> <p> </p> >>>>> #include "hilo.inc" >>>>> </div> >>>>> >>>>> In the file current.inc, change this >>>>> >>>>> #if $trend.windSpeed.formatted > 0 >>>>> ⇧ >>>>> #elif $trend.windSpeed.formatted < 0 >>>>> ⇩ >>>>> #end if >>>>> >>>>> >>>>> to this >>>>> >>>>> #if $trend.windSpeed.raw > 0 >>>>> ⇧ >>>>> #elif $trend.windSpeed.raw < 0 >>>>> ⇩ >>>>> #end if >>>>> >>>>> >>>>> On Sun, May 2, 2021 at 12:45 AM Ton vanN <ton...@gmail.com> wrote: >>>>> >>>>>> Digging a bit deeper, the reason given for that errorreport is >>>>>> correct, because subfolder INST_SKIN_ROOT indeed does not exist >>>>>> Reason: [Errno 2] Bestand of map bestaat niet: >>>>>> '/home/weewx/skins/basic/INST_SKIN_ROOT/basic/current.inc' >>>>>> But why is WeeWx asking for it? This is standard configuration >>>>>> (besides my activation of StdReport and related mod of skin.conf). >>>>>> >>>>>> Op zondag 2 mei 2021 om 09:27:56 UTC+2 schreef Ton vanN: >>>>>> >>>>>>> Perhaps related: >>>>>>> the error reported in time-segment 08:21:58 is strange, because the >>>>>>> file index.html.tmpl is actually present at the indicated location. >>>>>>> >>>>>>> Op zondag 2 mei 2021 om 08:35:33 UTC+2 schreef Ton vanN: >>>>>>> >>>>>> Tom, >>>>>>>> ;-) That was a really good advice! >>>>>>>> Turned to running WeeWX as daemon, started the logging and got a >>>>>>>> different read-out which now includes a reference to the HWA-template. >>>>>>>> That confirms my 'nagging feeling' that something is not OK with >>>>>>>> the handling of that HWA-template: see time-segment 08:21:59 >>>>>>>> Next step is finding a soulution ..... >>>>>>>> >>>>>>>> Op zaterdag 1 mei 2021 om 20:02:10 UTC+2 schreef tke...@gmail.com: >>>>>>>> >>>>>>>>> This is most likely being caused by the terminal session detaching >>>>>>>>> from the process. This can happen when you ssh into a computer, start >>>>>>>>> a >>>>>>>>> process, then exit the ssh session. >>>>>>>>> >>>>>>>>> Either run weewxd as a daemon, or keep the terminal window open. >>>>>>>>> >>>>>>>>> That's the best I can come up with. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail < >>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Addition to description of *Sequence1*. >>>>>>>>>> >>>>>>>>>> Once weewx has been started, at Putty's CLI appears the expected >>>>>>>>>> stream of print-out. >>>>>>>>>> At the keyboard break that stream ends with an error report. >>>>>>>>>> Perhaps that error report also provides some relevant info? >>>>>>>>>> See below the last printout from the loop and the error report >>>>>>>>>> mentioned above. >>>>>>>>>> >>>>>>>>>> LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: >>>>>>>>>> 31.165113295698216, appTemp: 28.451970776082117, barometer: >>>>>>>>>> 31.09999991633433, cloudbase: 1300.0558352360692, >>>>>>>>>> consBatteryVoltage: >>>>>>>>>> 12.743352544782736, dateTime: 1619867879, dewpoint: >>>>>>>>>> 27.19647824994742, >>>>>>>>>> heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, >>>>>>>>>> humidex: >>>>>>>>>> 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: >>>>>>>>>> 29.99999665337326, inTemp: 63.00000167331337, inTempBatteryStatus: >>>>>>>>>> 0, >>>>>>>>>> maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, >>>>>>>>>> outTemp: >>>>>>>>>> 32.6713164908827, outTempBatteryStatus: 0, pressure: >>>>>>>>>> 31.09999991633433, >>>>>>>>>> radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, >>>>>>>>>> rainRate: 0.0, >>>>>>>>>> referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, >>>>>>>>>> supplyVoltage: >>>>>>>>>> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, >>>>>>>>>> windBatteryStatus: 0, windchill: 32.6713164908827, windDir: >>>>>>>>>> 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: >>>>>>>>>> 359.99998494017905, windSpeed: 4.1832835950827985e-07 >>>>>>>>>> ^CTraceback (most recent call last): >>>>>>>>>> File "./bin/weewxd", line 264, in <module> >>>>>>>>>> main() >>>>>>>>>> File "./bin/weewxd", line 157, in main >>>>>>>>>> engine.run() >>>>>>>>>> File "/home/weewx/bin/weewx/engine.py", line 208, in run >>>>>>>>>> for packet in self.console.genLoopPackets(): >>>>>>>>>> File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, in >>>>>>>>>> genLoopPackets >>>>>>>>>> time.sleep(sleep_time) >>>>>>>>>> KeyboardInterrupt >>>>>>>>>> pi@Raspberry8:/home/weewx $ >>>>>>>>>> Op 1-5-2021 om 12:28 schreef Ton vanN: >>>>>>>>>> >>>>>>>>>> As requested, a leaner realisation. >>>>>>>>>> In attached file the results of 2 sequences executed: >>>>>>>>>> - in both cases 'clean restart' of the raspberry to ensure that >>>>>>>>>> no unintended process running, followed by 1 direct switch-on of >>>>>>>>>> weewx >>>>>>>>>> - the sequences differ in the way going to logging, as described >>>>>>>>>> in the file >>>>>>>>>> - in sequence1 apparently oneshot run before weewx stops. Exit of >>>>>>>>>> logging is by keyboard break. >>>>>>>>>> - in sequence2 stream of repeating logging info. Also terminated >>>>>>>>>> the logging by keyboard break. >>>>>>>>>> >>>>>>>>>> Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef >>>>>>>>>> tke...@gmail.com: >>>>>>>>>> >>>>>>>>>>> You have many instances of weewxd all running simultaneously. >>>>>>>>>>> Kill them all, then start one. >>>>>>>>>>> >>>>>>>>>>> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <ton...@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> As requested. >>>>>>>>>>>> >>>>>>>>>>>> Scanning the logging see repeated reporting of loading of >>>>>>>>>>>> StdReport, but no text clearly pointing to errors in execution of >>>>>>>>>>>> StandardReport, nor any results. >>>>>>>>>>>> But as explained in the first message of this thread, have >>>>>>>>>>>> 'limited' experience with weewx ... >>>>>>>>>>>> >>>>>>>>>>>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>>>>>>>>>>> >>>>>>>>>>>>> The config files and template tell us what should be happening >>>>>>>>>>>>> but the log will tell us what is actually happening. Have you >>>>>>>>>>>>> looked in the >>>>>>>>>>>>> log? Are there any errors? You already have debug = 1 in >>>>>>>>>>>>> weewx.conf so you >>>>>>>>>>>>> should be able to work out from the log what is being generated >>>>>>>>>>>>> and what is >>>>>>>>>>>>> not. Post at least 10 minutes of log here and we can see what is >>>>>>>>>>>>> going on. >>>>>>>>>>>>> >>>>>>>>>>>>> Gary >>>>>>>>>>>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 ton...@gmail.com >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Tom, >>>>>>>>>>>>>> Puzzled/baffled, because following the hints from you and >>>>>>>>>>>>>> taking into account also the hints from the much earlier >>>>>>>>>>>>>> discussion between >>>>>>>>>>>>>> you and Franklin Bockstael, but still no file openweerdata.htm >>>>>>>>>>>>>> appearing in >>>>>>>>>>>>>> folder /home/weewx/public_html. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Have attached the (probably) relevant setup-files: >>>>>>>>>>>>>> - weewx.conf which in folder /home/weewx enables >>>>>>>>>>>>>> Standard-skin and sets the related HTML_Root to >>>>>>>>>>>>>> /home/weewx/public_html >>>>>>>>>>>>>> (*on purpose*, to get a different output from 'basic' etc.) >>>>>>>>>>>>>> - skin.conf which in folder /home/weewx/skins/Standard in the >>>>>>>>>>>>>> [ToDate]-segment at the first lines enables/sets the template >>>>>>>>>>>>>> for owd (and >>>>>>>>>>>>>> disables the 'later', other templates) >>>>>>>>>>>>>> - the template openweerdata.htm.tmpl as located in >>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>> >>>>>>>>>>>>>> The adapted conf-files seem OK, but now the nagging feeling >>>>>>>>>>>>>> that the template has an inhibiting error. >>>>>>>>>>>>>> But that is contradicted by the fact that Franklin Bockstael >>>>>>>>>>>>>> has it in operation since long time without problems. >>>>>>>>>>>>>> >>>>>>>>>>>>>> During testing not running WeeWx as daemon, but 'discrete >>>>>>>>>>>>>> start' by command ./bin/weexd >>>>>>>>>>>>>> >>>>>>>>>>>>>> Do you see a solution? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef >>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> I should add that the template must also be listed in the >>>>>>>>>>>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer <tke...@gmail.com> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Yes, the skin has to be enabled for any of the templates in >>>>>>>>>>>>>>>> the skin's folder to be processed. So, if you put your "HWA" >>>>>>>>>>>>>>>> template in >>>>>>>>>>>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Or, you can put HWA in your "./basic" folder, then enable >>>>>>>>>>>>>>>> your basic report. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Either way will work. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN <ton...@gmail.com> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Brainwave?* >>>>>>>>>>>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>>>>>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the >>>>>>>>>>>>>>>>> template for >>>>>>>>>>>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>>>>>>>>>>> Considering similarity with generation of other html-files >>>>>>>>>>>>>>>>> the call to the HWA-template was put in skin.conf in same >>>>>>>>>>>>>>>>> folder >>>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Looking in /home/weewx at the below setting in weewx.conf, >>>>>>>>>>>>>>>>> starting to doubt that such choice is correct. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [[StandardReport]] >>>>>>>>>>>>>>>>> # This is the old "Standard" skin. By default, >>>>>>>>>>>>>>>>> it is not enabled. >>>>>>>>>>>>>>>>> skin = Standard >>>>>>>>>>>>>>>>> enable = false >>>>>>>>>>>>>>>>> [[basic]] >>>>>>>>>>>>>>>>> skin = basic >>>>>>>>>>>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>> current = INST_SKIN_ROOT/basic/current.inc >>>>>>>>>>>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> If enable=false, *it looks as if* 'Standard'will not be >>>>>>>>>>>>>>>>> called and (as consequence no call to the HWA-template at >>>>>>>>>>>>>>>>> it's present >>>>>>>>>>>>>>>>> location). >>>>>>>>>>>>>>>>> But if that assumption is correct, where should I >>>>>>>>>>>>>>>>> alternatively put the template and call to the HWA-template >>>>>>>>>>>>>>>>> to stay in line >>>>>>>>>>>>>>>>> with 'normal practise'? >>>>>>>>>>>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton >>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> As requested, attached is the repeating segment of the >>>>>>>>>>>>>>>>>> syslog with debug=1 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Stop weewx >>>>>>>>>>>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>>>>>>>>>>> Restart weewx >>>>>>>>>>>>>>>>>>> Post the log from startup. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN < >>>>>>>>>>>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with >>>>>>>>>>>>>>>>>>>> PuttySSH >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef Ton >>>>>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>>>>>>>>>>> Have the main progam as simulator up and running (= >>>>>>>>>>>>>>>>>>>>> see files updating in folder public_html ). >>>>>>>>>>>>>>>>>>>>> Now trying to implement a template to generate an >>>>>>>>>>>>>>>>>>>>> uploadfile for HetWeerActueel. >>>>>>>>>>>>>>>>>>>>> [has been discussed earlier in this forum, but that >>>>>>>>>>>>>>>>>>>>> discussion apparently not ending with working solution] >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Template [attached in zip-file] should generate a >>>>>>>>>>>>>>>>>>>>> htm-file. >>>>>>>>>>>>>>>>>>>>> For activation of the template I inserted the >>>>>>>>>>>>>>>>>>>>> following text in >>>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of the >>>>>>>>>>>>>>>>>>>>> section CheetahGenerator >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [[HWA]] >>>>>>>>>>>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Would expect the generated htm-file to appear in >>>>>>>>>>>>>>>>>>>>> folder public_html >>>>>>>>>>>>>>>>>>>>> When running WeeWX no errors (which is OK), but also >>>>>>>>>>>>>>>>>>>>> nowhere the expected htm-file: >>>>>>>>>>>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>> >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>> in the Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>> https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe >>>>>>>>>> . >>>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>>> to weewx-user+...@googlegroups.com. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> =============================================================== >>>>>>>>>> Contactinfo voor Anton van Nieuwenhuijzen: >>>>>>>>>> Email = ton...@gmail.com >>>>>>>>>> Fax2Mail = (+31/0)84.8397303 <+31%2084%20839%207303> [ook >>>>>>>>>> Voice2Mail] >>>>>>>>>> =============================================================== >>>>>>>>>> Deze E-mail en eventuele aanhangende files zijn >>>>>>>>>> alleen bestemd voor de geadresseerde(n). >>>>>>>>>> Als je deze E-mail ten onrechte hebt ontvangen, >>>>>>>>>> dan aub verwijderen en de afzender informeren. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> Peter Quinn >> (415)794-2264 <(415)%20794-2264> >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com.
