Yes. I can't find the official documentation but See https://devopedia.org/python-2-vs-3 Although Python is strongly typed, Python 2 permits strange comparisons: None < 3 < "2"
On Sun, May 2, 2021 at 2:47 PM Ton vanN <tonv...@gmail.com> wrote: > Reason for my speculation: > at the HWA-forum several people already using WeeWx for years with the > original HWA-template, *probably* started & still operating with > Python2.x, and never heard complaints about the template. > > That triggers another aspect: > when issuing for the HWA-Forum this updated version of the template, some > advice must be given that (backwards) application with Python2.x must be > checked. > Best to give this template-version and also the older version a related, > distinguishing name. > > Op zondag 2 mei 2021 om 23:33:32 UTC+2 schreef Ton vanN: > >> Peter, that was the hint required! >> The HWA-template now has become active. >> >> Speculation, but could this be an aspect of changing from Python2.x to >> Python3.x? >> >> >> Op zondag 2 mei 2021 om 23:06:42 UTC+2 schreef peterq...@gmail.com: >> >>> Looks like that could be it. The .formatted is turning the barometer >>> value into a string and comparing it against zero, which is an int. Might >>> try >>> >>> $trend.barometer.raw > 0 >>> >>> I would have thought that Python would have cast the string into an int >>> for you, but apparently not. >>> >>> On Sun, May 2, 2021 at 1:45 PM Ton vanN <ton...@gmail.com> wrote: >>> >>>> The error report for the HWA-template is like >>>> >>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>> weewx.cheetahgenerator: **** Ignoring template >>>> /home/weewx/skins/Standard/openweerdata.htm.tmpl >>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>> weewx.cheetahgenerator: **** Reason: '>' not supported between instances of >>>> 'str' and 'int' >>>> >>>> That seems to point to the section in the template which determines >>>> barotrend >>>> with first scriptlines >>>> >>>> #if $trend.barometer.formatted > 0 >>>> \$barTrend = "Rising"; >>>> #end if >>>> >>>> *Not* *[?]* to the earlier section which translates windDir.raw into >>>> windDirection, because those scriptlines have 'real' values for comparison >>>> >>>> #if $current.windDir.raw >= 11.25 and $current.windDir.raw < 33.75 >>>> \$windDirection = "NNO"; >>>> >>>> Apparently some tiny detail which differentiates a comparison with >>>> integer value and a comparison with real value: >>>> *or* is the problem in the lefthandside of the comparison? >>>> Op zondag 2 mei 2021 om 21:29:59 UTC+2 schreef Ton vanN: >>>> >>>>> That aspect of /home/weewx/skin/basic now solved. >>>>> Related question: solution also applicable for v4.5? >>>>> >>>>> Now focus on finding solution for HWA-template. >>>>> >>>>> Op zondag 2 mei 2021 om 17:26:42 UTC+2 schreef tke...@gmail.com: >>>>> >>>>>> It looks like the example skin "basic" has a few issues. To get it to >>>>>> work, go into basic/index.html.tmpl and change this >>>>>> >>>>>> <div id='data_table'> >>>>>> #include $Extras.current >>>>>> <p> </p> >>>>>> #include $Extras.hilo >>>>>> </div> >>>>>> >>>>>> to this >>>>>> >>>>>> <div id='data_table'> >>>>>> #include "current.inc" >>>>>> <p> </p> >>>>>> #include "hilo.inc" >>>>>> </div> >>>>>> >>>>>> In the file current.inc, change this >>>>>> >>>>>> #if $trend.windSpeed.formatted > 0 >>>>>> ⇧ >>>>>> #elif $trend.windSpeed.formatted < 0 >>>>>> ⇩ >>>>>> #end if >>>>>> >>>>>> >>>>>> to this >>>>>> >>>>>> #if $trend.windSpeed.raw > 0 >>>>>> ⇧ >>>>>> #elif $trend.windSpeed.raw < 0 >>>>>> ⇩ >>>>>> #end if >>>>>> >>>>>> >>>>>> On Sun, May 2, 2021 at 12:45 AM Ton vanN <ton...@gmail.com> wrote: >>>>>> >>>>>>> Digging a bit deeper, the reason given for that errorreport is >>>>>>> correct, because subfolder INST_SKIN_ROOT indeed does not exist >>>>>>> Reason: [Errno 2] Bestand of map bestaat niet: >>>>>>> '/home/weewx/skins/basic/INST_SKIN_ROOT/basic/current.inc' >>>>>>> But why is WeeWx asking for it? This is standard configuration >>>>>>> (besides my activation of StdReport and related mod of skin.conf). >>>>>>> >>>>>>> Op zondag 2 mei 2021 om 09:27:56 UTC+2 schreef Ton vanN: >>>>>>> >>>>>>>> Perhaps related: >>>>>>>> the error reported in time-segment 08:21:58 is strange, because the >>>>>>>> file index.html.tmpl is actually present at the indicated location. >>>>>>>> >>>>>>>> Op zondag 2 mei 2021 om 08:35:33 UTC+2 schreef Ton vanN: >>>>>>>> >>>>>>> Tom, >>>>>>>>> ;-) That was a really good advice! >>>>>>>>> Turned to running WeeWX as daemon, started the logging and got a >>>>>>>>> different read-out which now includes a reference to the HWA-template. >>>>>>>>> That confirms my 'nagging feeling' that something is not OK with >>>>>>>>> the handling of that HWA-template: see time-segment 08:21:59 >>>>>>>>> Next step is finding a soulution ..... >>>>>>>>> >>>>>>>>> Op zaterdag 1 mei 2021 om 20:02:10 UTC+2 schreef tke...@gmail.com: >>>>>>>>> >>>>>>>>>> This is most likely being caused by the terminal session >>>>>>>>>> detaching from the process. This can happen when you ssh into a >>>>>>>>>> computer, >>>>>>>>>> start a process, then exit the ssh session. >>>>>>>>>> >>>>>>>>>> Either run weewxd as a daemon, or keep the terminal window open. >>>>>>>>>> >>>>>>>>>> That's the best I can come up with. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail < >>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Addition to description of *Sequence1*. >>>>>>>>>>> >>>>>>>>>>> Once weewx has been started, at Putty's CLI appears the expected >>>>>>>>>>> stream of print-out. >>>>>>>>>>> At the keyboard break that stream ends with an error report. >>>>>>>>>>> Perhaps that error report also provides some relevant info? >>>>>>>>>>> See below the last printout from the loop and the error report >>>>>>>>>>> mentioned above. >>>>>>>>>>> >>>>>>>>>>> LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: >>>>>>>>>>> 31.165113295698216, appTemp: 28.451970776082117, barometer: >>>>>>>>>>> 31.09999991633433, cloudbase: 1300.0558352360692, >>>>>>>>>>> consBatteryVoltage: >>>>>>>>>>> 12.743352544782736, dateTime: 1619867879, dewpoint: >>>>>>>>>>> 27.19647824994742, >>>>>>>>>>> heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, >>>>>>>>>>> humidex: >>>>>>>>>>> 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: >>>>>>>>>>> 29.99999665337326, inTemp: 63.00000167331337, inTempBatteryStatus: >>>>>>>>>>> 0, >>>>>>>>>>> maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, >>>>>>>>>>> outTemp: >>>>>>>>>>> 32.6713164908827, outTempBatteryStatus: 0, pressure: >>>>>>>>>>> 31.09999991633433, >>>>>>>>>>> radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, >>>>>>>>>>> rainRate: 0.0, >>>>>>>>>>> referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, >>>>>>>>>>> supplyVoltage: >>>>>>>>>>> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, >>>>>>>>>>> windBatteryStatus: 0, windchill: 32.6713164908827, windDir: >>>>>>>>>>> 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: >>>>>>>>>>> 359.99998494017905, windSpeed: 4.1832835950827985e-07 >>>>>>>>>>> ^CTraceback (most recent call last): >>>>>>>>>>> File "./bin/weewxd", line 264, in <module> >>>>>>>>>>> main() >>>>>>>>>>> File "./bin/weewxd", line 157, in main >>>>>>>>>>> engine.run() >>>>>>>>>>> File "/home/weewx/bin/weewx/engine.py", line 208, in run >>>>>>>>>>> for packet in self.console.genLoopPackets(): >>>>>>>>>>> File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, >>>>>>>>>>> in genLoopPackets >>>>>>>>>>> time.sleep(sleep_time) >>>>>>>>>>> KeyboardInterrupt >>>>>>>>>>> pi@Raspberry8:/home/weewx $ >>>>>>>>>>> Op 1-5-2021 om 12:28 schreef Ton vanN: >>>>>>>>>>> >>>>>>>>>>> As requested, a leaner realisation. >>>>>>>>>>> In attached file the results of 2 sequences executed: >>>>>>>>>>> - in both cases 'clean restart' of the raspberry to ensure that >>>>>>>>>>> no unintended process running, followed by 1 direct switch-on of >>>>>>>>>>> weewx >>>>>>>>>>> - the sequences differ in the way going to logging, as described >>>>>>>>>>> in the file >>>>>>>>>>> - in sequence1 apparently oneshot run before weewx stops. Exit >>>>>>>>>>> of logging is by keyboard break. >>>>>>>>>>> - in sequence2 stream of repeating logging info. Also terminated >>>>>>>>>>> the logging by keyboard break. >>>>>>>>>>> >>>>>>>>>>> Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef >>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>> >>>>>>>>>>>> You have many instances of weewxd all running simultaneously. >>>>>>>>>>>> Kill them all, then start one. >>>>>>>>>>>> >>>>>>>>>>>> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <ton...@gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> As requested. >>>>>>>>>>>>> >>>>>>>>>>>>> Scanning the logging see repeated reporting of loading of >>>>>>>>>>>>> StdReport, but no text clearly pointing to errors in execution of >>>>>>>>>>>>> StandardReport, nor any results. >>>>>>>>>>>>> But as explained in the first message of this thread, have >>>>>>>>>>>>> 'limited' experience with weewx ... >>>>>>>>>>>>> >>>>>>>>>>>>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>>>>>>>>>>>> >>>>>>>>>>>>>> The config files and template tell us what should be >>>>>>>>>>>>>> happening but the log will tell us what is actually happening. >>>>>>>>>>>>>> Have you >>>>>>>>>>>>>> looked in the log? Are there any errors? You already have debug >>>>>>>>>>>>>> = 1 in >>>>>>>>>>>>>> weewx.conf so you should be able to work out from the log what >>>>>>>>>>>>>> is being >>>>>>>>>>>>>> generated and what is not. Post at least 10 minutes of log here >>>>>>>>>>>>>> and we can >>>>>>>>>>>>>> see what is going on. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Gary >>>>>>>>>>>>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 ton...@gmail.com >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Tom, >>>>>>>>>>>>>>> Puzzled/baffled, because following the hints from you and >>>>>>>>>>>>>>> taking into account also the hints from the much earlier >>>>>>>>>>>>>>> discussion between >>>>>>>>>>>>>>> you and Franklin Bockstael, but still no file openweerdata.htm >>>>>>>>>>>>>>> appearing in >>>>>>>>>>>>>>> folder /home/weewx/public_html. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Have attached the (probably) relevant setup-files: >>>>>>>>>>>>>>> - weewx.conf which in folder /home/weewx enables >>>>>>>>>>>>>>> Standard-skin and sets the related HTML_Root to >>>>>>>>>>>>>>> /home/weewx/public_html >>>>>>>>>>>>>>> (*on purpose*, to get a different output from 'basic' etc.) >>>>>>>>>>>>>>> - skin.conf which in folder /home/weewx/skins/Standard in >>>>>>>>>>>>>>> the [ToDate]-segment at the first lines enables/sets the >>>>>>>>>>>>>>> template for owd >>>>>>>>>>>>>>> (and disables the 'later', other templates) >>>>>>>>>>>>>>> - the template openweerdata.htm.tmpl as located in >>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The adapted conf-files seem OK, but now the nagging feeling >>>>>>>>>>>>>>> that the template has an inhibiting error. >>>>>>>>>>>>>>> But that is contradicted by the fact that Franklin Bockstael >>>>>>>>>>>>>>> has it in operation since long time without problems. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> During testing not running WeeWx as daemon, but 'discrete >>>>>>>>>>>>>>> start' by command ./bin/weexd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Do you see a solution? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef >>>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I should add that the template must also be listed in the >>>>>>>>>>>>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer < >>>>>>>>>>>>>>>> tke...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Yes, the skin has to be enabled for any of the templates >>>>>>>>>>>>>>>>> in the skin's folder to be processed. So, if you put your >>>>>>>>>>>>>>>>> "HWA" template in >>>>>>>>>>>>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Or, you can put HWA in your "./basic" folder, then enable >>>>>>>>>>>>>>>>> your basic report. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Either way will work. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN <ton...@gmail.com> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> *Brainwave?* >>>>>>>>>>>>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the >>>>>>>>>>>>>>>>>> template for >>>>>>>>>>>>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>>>>>>>>>>>> Considering similarity with generation of other >>>>>>>>>>>>>>>>>> html-files the call to the HWA-template was put in skin.conf >>>>>>>>>>>>>>>>>> in same folder >>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Looking in /home/weewx at the below setting in >>>>>>>>>>>>>>>>>> weewx.conf, starting to doubt that such choice is correct. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> [[StandardReport]] >>>>>>>>>>>>>>>>>> # This is the old "Standard" skin. By >>>>>>>>>>>>>>>>>> default, it is not enabled. >>>>>>>>>>>>>>>>>> skin = Standard >>>>>>>>>>>>>>>>>> enable = false >>>>>>>>>>>>>>>>>> [[basic]] >>>>>>>>>>>>>>>>>> skin = basic >>>>>>>>>>>>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>>> current = INST_SKIN_ROOT/basic/current.inc >>>>>>>>>>>>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> If enable=false, *it looks as if* 'Standard'will not be >>>>>>>>>>>>>>>>>> called and (as consequence no call to the HWA-template at >>>>>>>>>>>>>>>>>> it's present >>>>>>>>>>>>>>>>>> location). >>>>>>>>>>>>>>>>>> But if that assumption is correct, where should I >>>>>>>>>>>>>>>>>> alternatively put the template and call to the HWA-template >>>>>>>>>>>>>>>>>> to stay in line >>>>>>>>>>>>>>>>>> with 'normal practise'? >>>>>>>>>>>>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton >>>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> As requested, attached is the repeating segment of the >>>>>>>>>>>>>>>>>>> syslog with debug=1 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Stop weewx >>>>>>>>>>>>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>>>>>>>>>>>> Restart weewx >>>>>>>>>>>>>>>>>>>> Post the log from startup. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN < >>>>>>>>>>>>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with >>>>>>>>>>>>>>>>>>>>> PuttySSH >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef Ton >>>>>>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>>>>>>>>>>>> Have the main progam as simulator up and running (= >>>>>>>>>>>>>>>>>>>>>> see files updating in folder public_html ). >>>>>>>>>>>>>>>>>>>>>> Now trying to implement a template to generate an >>>>>>>>>>>>>>>>>>>>>> uploadfile for HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>> [has been discussed earlier in this forum, but that >>>>>>>>>>>>>>>>>>>>>> discussion apparently not ending with working solution] >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Template [attached in zip-file] should generate a >>>>>>>>>>>>>>>>>>>>>> htm-file. >>>>>>>>>>>>>>>>>>>>>> For activation of the template I inserted the >>>>>>>>>>>>>>>>>>>>>> following text in >>>>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of >>>>>>>>>>>>>>>>>>>>>> the section CheetahGenerator >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> [[HWA]] >>>>>>>>>>>>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Would expect the generated htm-file to appear in >>>>>>>>>>>>>>>>>>>>>> folder public_html >>>>>>>>>>>>>>>>>>>>>> When running WeeWX no errors (which is OK), but also >>>>>>>>>>>>>>>>>>>>>> nowhere the expected htm-file: >>>>>>>>>>>>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>>>>>>>>>>>> to the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>>> in the Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe >>>>>>>>>>> . >>>>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>>>> to weewx-user+...@googlegroups.com. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>>> =============================================================== >>>>>>>>>>> Contactinfo voor Anton van Nieuwenhuijzen: >>>>>>>>>>> Email = ton...@gmail.com >>>>>>>>>>> Fax2Mail = (+31/0)84.8397303 <+31%2084%20839%207303> [ook >>>>>>>>>>> Voice2Mail] >>>>>>>>>>> =============================================================== >>>>>>>>>>> Deze E-mail en eventuele aanhangende files zijn >>>>>>>>>>> alleen bestemd voor de geadresseerde(n). >>>>>>>>>>> Als je deze E-mail ten onrechte hebt ontvangen, >>>>>>>>>>> dan aub verwijderen en de afzender informeren. >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> >>> >>> -- >>> Peter Quinn >>> (415)794-2264 <(415)%20794-2264> >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Peter Quinn (415)794-2264 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAA1SM20F%3DEHc-L4Gw%2BNnRgQ%2B%3D6Y_JJV3T-gwfGBxPPBYhm2Mwg%40mail.gmail.com.
