It's a bit of python 2v3 and poor coding. The first thing to remember is that in a WeeWX Cheetah template .formatted (now .formatted()) returns a string, .raw returns the raw value; typically an int or a float or None (though it could also be a string if the underlying field is a string but there are none of those in any of the WeeWX shipped schemas).
Under python2 you can compare strings to numerics (int and float) without error, that being said you will not get the correct answer but it won't raise an error. Try doing this: gary@buster5:~$ python2 Python 2.7.16 (default, Oct 10 2019, 22:02:15) [GCC 8.3.0] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> "5" > 4 True >>> "3" > 4 True >>> Note that the second expression gives and incorrect answer. Python 3 is a little more picky, trying the same under python3 raises an error: gary@buster5:~$ python3 Python 3.7.3 (default, Jan 22 2021, 20:04:44) [GCC 8.3.0] on linux Type "help", "copyright", "credits" or "license" for more information. >>> "5" > 4 Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: '>' not supported between instances of 'str' and 'int' Then add into the mix the fact that a .raw could return the python value None. Python 2 will happily allow None in a comparison but python3 will not, it will raise a TypeError albeit with a different error message. So getting back to the original comparison expression in the report. Under python2 it will operate without error, it may give the wrong result under certain conditions but it will not cause an error that will force the template generation to abort. Under python3 the expression will raise an error on every generation and the template will abort. The obvious solution is to change .format to .raw, that will work under most conditions but if $trend.barometer.raw is ever None (quite possible on startup or if there has been an interruption) it will fail. The solution is to either catch the error and deal with it or alter the conditional to check for None, eg (untested): #if $trend.barometer.raw is not None and $trend.barometer.raw > 0 #do something #end if Gary On Monday, 3 May 2021 at 07:56:41 UTC+10 peterq...@gmail.com wrote: > Yes. > > I can't find the official documentation but See > https://devopedia.org/python-2-vs-3 > Although Python is strongly typed, Python 2 permits strange comparisons: None > < 3 < "2" > > On Sun, May 2, 2021 at 2:47 PM Ton vanN <ton...@gmail.com> wrote: > >> Reason for my speculation: >> at the HWA-forum several people already using WeeWx for years with the >> original HWA-template, *probably* started & still operating with >> Python2.x, and never heard complaints about the template. >> >> That triggers another aspect: >> when issuing for the HWA-Forum this updated version of the template, some >> advice must be given that (backwards) application with Python2.x must be >> checked. >> Best to give this template-version and also the older version a related, >> distinguishing name. >> >> Op zondag 2 mei 2021 om 23:33:32 UTC+2 schreef Ton vanN: >> >>> Peter, that was the hint required! >>> The HWA-template now has become active. >>> >>> Speculation, but could this be an aspect of changing from Python2.x to >>> Python3.x? >>> >>> >>> Op zondag 2 mei 2021 om 23:06:42 UTC+2 schreef peterq...@gmail.com: >>> >>>> Looks like that could be it. The .formatted is turning the barometer >>>> value into a string and comparing it against zero, which is an int. Might >>>> try >>>> >>>> $trend.barometer.raw > 0 >>>> >>>> I would have thought that Python would have cast the string into an int >>>> for you, but apparently not. >>>> >>>> On Sun, May 2, 2021 at 1:45 PM Ton vanN <ton...@gmail.com> wrote: >>>> >>>>> The error report for the HWA-template is like >>>>> >>>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>>> weewx.cheetahgenerator: **** Ignoring template >>>>> /home/weewx/skins/Standard/openweerdata.htm.tmpl >>>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>>> weewx.cheetahgenerator: **** Reason: '>' not supported between instances >>>>> of >>>>> 'str' and 'int' >>>>> >>>>> That seems to point to the section in the template which determines >>>>> barotrend >>>>> with first scriptlines >>>>> >>>>> #if $trend.barometer.formatted > 0 >>>>> \$barTrend = "Rising"; >>>>> #end if >>>>> >>>>> *Not* *[?]* to the earlier section which translates windDir.raw into >>>>> windDirection, because those scriptlines have 'real' values for >>>>> comparison >>>>> >>>>> #if $current.windDir.raw >= 11.25 and $current.windDir.raw < >>>>> 33.75 >>>>> \$windDirection = "NNO"; >>>>> >>>>> Apparently some tiny detail which differentiates a comparison with >>>>> integer value and a comparison with real value: >>>>> *or* is the problem in the lefthandside of the comparison? >>>>> Op zondag 2 mei 2021 om 21:29:59 UTC+2 schreef Ton vanN: >>>>> >>>>>> That aspect of /home/weewx/skin/basic now solved. >>>>>> Related question: solution also applicable for v4.5? >>>>>> >>>>>> Now focus on finding solution for HWA-template. >>>>>> >>>>>> Op zondag 2 mei 2021 om 17:26:42 UTC+2 schreef tke...@gmail.com: >>>>>> >>>>>>> It looks like the example skin "basic" has a few issues. To get it >>>>>>> to work, go into basic/index.html.tmpl and change this >>>>>>> >>>>>>> <div id='data_table'> >>>>>>> #include $Extras.current >>>>>>> <p> </p> >>>>>>> #include $Extras.hilo >>>>>>> </div> >>>>>>> >>>>>>> to this >>>>>>> >>>>>>> <div id='data_table'> >>>>>>> #include "current.inc" >>>>>>> <p> </p> >>>>>>> #include "hilo.inc" >>>>>>> </div> >>>>>>> >>>>>>> In the file current.inc, change this >>>>>>> >>>>>>> #if $trend.windSpeed.formatted > 0 >>>>>>> ⇧ >>>>>>> #elif $trend.windSpeed.formatted < 0 >>>>>>> ⇩ >>>>>>> #end if >>>>>>> >>>>>>> >>>>>>> to this >>>>>>> >>>>>>> #if $trend.windSpeed.raw > 0 >>>>>>> ⇧ >>>>>>> #elif $trend.windSpeed.raw < 0 >>>>>>> ⇩ >>>>>>> #end if >>>>>>> >>>>>>> >>>>>>> On Sun, May 2, 2021 at 12:45 AM Ton vanN <ton...@gmail.com> wrote: >>>>>>> >>>>>>>> Digging a bit deeper, the reason given for that errorreport is >>>>>>>> correct, because subfolder INST_SKIN_ROOT indeed does not exist >>>>>>>> Reason: [Errno 2] Bestand of map bestaat niet: >>>>>>>> '/home/weewx/skins/basic/INST_SKIN_ROOT/basic/current.inc' >>>>>>>> But why is WeeWx asking for it? This is standard configuration >>>>>>>> (besides my activation of StdReport and related mod of skin.conf). >>>>>>>> >>>>>>>> Op zondag 2 mei 2021 om 09:27:56 UTC+2 schreef Ton vanN: >>>>>>>> >>>>>>>>> Perhaps related: >>>>>>>>> the error reported in time-segment 08:21:58 is strange, because >>>>>>>>> the file index.html.tmpl is actually present at the indicated >>>>>>>>> location. >>>>>>>>> >>>>>>>>> Op zondag 2 mei 2021 om 08:35:33 UTC+2 schreef Ton vanN: >>>>>>>>> >>>>>>>> Tom, >>>>>>>>>> ;-) That was a really good advice! >>>>>>>>>> Turned to running WeeWX as daemon, started the logging and got a >>>>>>>>>> different read-out which now includes a reference to the >>>>>>>>>> HWA-template. >>>>>>>>>> That confirms my 'nagging feeling' that something is not OK with >>>>>>>>>> the handling of that HWA-template: see time-segment 08:21:59 >>>>>>>>>> Next step is finding a soulution ..... >>>>>>>>>> >>>>>>>>>> Op zaterdag 1 mei 2021 om 20:02:10 UTC+2 schreef tke...@gmail.com >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>>> This is most likely being caused by the terminal session >>>>>>>>>>> detaching from the process. This can happen when you ssh into a >>>>>>>>>>> computer, >>>>>>>>>>> start a process, then exit the ssh session. >>>>>>>>>>> >>>>>>>>>>> Either run weewxd as a daemon, or keep the terminal window open. >>>>>>>>>>> >>>>>>>>>>> That's the best I can come up with. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail < >>>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Addition to description of *Sequence1*. >>>>>>>>>>>> >>>>>>>>>>>> Once weewx has been started, at Putty's CLI appears the >>>>>>>>>>>> expected stream of print-out. >>>>>>>>>>>> At the keyboard break that stream ends with an error report. >>>>>>>>>>>> Perhaps that error report also provides some relevant info? >>>>>>>>>>>> See below the last printout from the loop and the error report >>>>>>>>>>>> mentioned above. >>>>>>>>>>>> >>>>>>>>>>>> LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: >>>>>>>>>>>> 31.165113295698216, appTemp: 28.451970776082117, barometer: >>>>>>>>>>>> 31.09999991633433, cloudbase: 1300.0558352360692, >>>>>>>>>>>> consBatteryVoltage: >>>>>>>>>>>> 12.743352544782736, dateTime: 1619867879, dewpoint: >>>>>>>>>>>> 27.19647824994742, >>>>>>>>>>>> heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, >>>>>>>>>>>> humidex: >>>>>>>>>>>> 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: >>>>>>>>>>>> 29.99999665337326, inTemp: 63.00000167331337, inTempBatteryStatus: >>>>>>>>>>>> 0, >>>>>>>>>>>> maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, >>>>>>>>>>>> outTemp: >>>>>>>>>>>> 32.6713164908827, outTempBatteryStatus: 0, pressure: >>>>>>>>>>>> 31.09999991633433, >>>>>>>>>>>> radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, >>>>>>>>>>>> rainRate: 0.0, >>>>>>>>>>>> referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, >>>>>>>>>>>> supplyVoltage: >>>>>>>>>>>> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, >>>>>>>>>>>> windBatteryStatus: 0, windchill: 32.6713164908827, windDir: >>>>>>>>>>>> 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: >>>>>>>>>>>> 359.99998494017905, windSpeed: 4.1832835950827985e-07 >>>>>>>>>>>> ^CTraceback (most recent call last): >>>>>>>>>>>> File "./bin/weewxd", line 264, in <module> >>>>>>>>>>>> main() >>>>>>>>>>>> File "./bin/weewxd", line 157, in main >>>>>>>>>>>> engine.run() >>>>>>>>>>>> File "/home/weewx/bin/weewx/engine.py", line 208, in run >>>>>>>>>>>> for packet in self.console.genLoopPackets(): >>>>>>>>>>>> File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, >>>>>>>>>>>> in genLoopPackets >>>>>>>>>>>> time.sleep(sleep_time) >>>>>>>>>>>> KeyboardInterrupt >>>>>>>>>>>> pi@Raspberry8:/home/weewx $ >>>>>>>>>>>> Op 1-5-2021 om 12:28 schreef Ton vanN: >>>>>>>>>>>> >>>>>>>>>>>> As requested, a leaner realisation. >>>>>>>>>>>> In attached file the results of 2 sequences executed: >>>>>>>>>>>> - in both cases 'clean restart' of the raspberry to ensure that >>>>>>>>>>>> no unintended process running, followed by 1 direct switch-on of >>>>>>>>>>>> weewx >>>>>>>>>>>> - the sequences differ in the way going to logging, as >>>>>>>>>>>> described in the file >>>>>>>>>>>> - in sequence1 apparently oneshot run before weewx stops. Exit >>>>>>>>>>>> of logging is by keyboard break. >>>>>>>>>>>> - in sequence2 stream of repeating logging info. Also >>>>>>>>>>>> terminated the logging by keyboard break. >>>>>>>>>>>> >>>>>>>>>>>> Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef >>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>> >>>>>>>>>>>>> You have many instances of weewxd all running simultaneously. >>>>>>>>>>>>> Kill them all, then start one. >>>>>>>>>>>>> >>>>>>>>>>>>> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <ton...@gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> As requested. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Scanning the logging see repeated reporting of loading of >>>>>>>>>>>>>> StdReport, but no text clearly pointing to errors in execution >>>>>>>>>>>>>> of >>>>>>>>>>>>>> StandardReport, nor any results. >>>>>>>>>>>>>> But as explained in the first message of this thread, have >>>>>>>>>>>>>> 'limited' experience with weewx ... >>>>>>>>>>>>>> >>>>>>>>>>>>>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> The config files and template tell us what should be >>>>>>>>>>>>>>> happening but the log will tell us what is actually happening. >>>>>>>>>>>>>>> Have you >>>>>>>>>>>>>>> looked in the log? Are there any errors? You already have debug >>>>>>>>>>>>>>> = 1 in >>>>>>>>>>>>>>> weewx.conf so you should be able to work out from the log what >>>>>>>>>>>>>>> is being >>>>>>>>>>>>>>> generated and what is not. Post at least 10 minutes of log here >>>>>>>>>>>>>>> and we can >>>>>>>>>>>>>>> see what is going on. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 ton...@gmail.com >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Tom, >>>>>>>>>>>>>>>> Puzzled/baffled, because following the hints from you and >>>>>>>>>>>>>>>> taking into account also the hints from the much earlier >>>>>>>>>>>>>>>> discussion between >>>>>>>>>>>>>>>> you and Franklin Bockstael, but still no file openweerdata.htm >>>>>>>>>>>>>>>> appearing in >>>>>>>>>>>>>>>> folder /home/weewx/public_html. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Have attached the (probably) relevant setup-files: >>>>>>>>>>>>>>>> - weewx.conf which in folder /home/weewx enables >>>>>>>>>>>>>>>> Standard-skin and sets the related HTML_Root to >>>>>>>>>>>>>>>> /home/weewx/public_html >>>>>>>>>>>>>>>> (*on purpose*, to get a different output from 'basic' etc.) >>>>>>>>>>>>>>>> - skin.conf which in folder /home/weewx/skins/Standard in >>>>>>>>>>>>>>>> the [ToDate]-segment at the first lines enables/sets the >>>>>>>>>>>>>>>> template for owd >>>>>>>>>>>>>>>> (and disables the 'later', other templates) >>>>>>>>>>>>>>>> - the template openweerdata.htm.tmpl as located in >>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The adapted conf-files seem OK, but now the nagging feeling >>>>>>>>>>>>>>>> that the template has an inhibiting error. >>>>>>>>>>>>>>>> But that is contradicted by the fact that Franklin >>>>>>>>>>>>>>>> Bockstael has it in operation since long time without problems. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> During testing not running WeeWx as daemon, but 'discrete >>>>>>>>>>>>>>>> start' by command ./bin/weexd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Do you see a solution? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef >>>>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I should add that the template must also be listed in the >>>>>>>>>>>>>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer < >>>>>>>>>>>>>>>>> tke...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Yes, the skin has to be enabled for any of the templates >>>>>>>>>>>>>>>>>> in the skin's folder to be processed. So, if you put your >>>>>>>>>>>>>>>>>> "HWA" template in >>>>>>>>>>>>>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Or, you can put HWA in your "./basic" folder, then enable >>>>>>>>>>>>>>>>>> your basic report. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Either way will work. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN < >>>>>>>>>>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> *Brainwave?* >>>>>>>>>>>>>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, the >>>>>>>>>>>>>>>>>>> template for >>>>>>>>>>>>>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>>>>>>>>>>>>> Considering similarity with generation of other >>>>>>>>>>>>>>>>>>> html-files the call to the HWA-template was put in >>>>>>>>>>>>>>>>>>> skin.conf in same folder >>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Looking in /home/weewx at the below setting in >>>>>>>>>>>>>>>>>>> weewx.conf, starting to doubt that such choice is correct. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> [[StandardReport]] >>>>>>>>>>>>>>>>>>> # This is the old "Standard" skin. By >>>>>>>>>>>>>>>>>>> default, it is not enabled. >>>>>>>>>>>>>>>>>>> skin = Standard >>>>>>>>>>>>>>>>>>> enable = false >>>>>>>>>>>>>>>>>>> [[basic]] >>>>>>>>>>>>>>>>>>> skin = basic >>>>>>>>>>>>>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>>>> current = >>>>>>>>>>>>>>>>>>> INST_SKIN_ROOT/basic/current.inc >>>>>>>>>>>>>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> If enable=false, *it looks as if* 'Standard'will not >>>>>>>>>>>>>>>>>>> be called and (as consequence no call to the HWA-template >>>>>>>>>>>>>>>>>>> at it's present >>>>>>>>>>>>>>>>>>> location). >>>>>>>>>>>>>>>>>>> But if that assumption is correct, where should I >>>>>>>>>>>>>>>>>>> alternatively put the template and call to the HWA-template >>>>>>>>>>>>>>>>>>> to stay in line >>>>>>>>>>>>>>>>>>> with 'normal practise'? >>>>>>>>>>>>>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton >>>>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> As requested, attached is the repeating segment of the >>>>>>>>>>>>>>>>>>>> syslog with debug=1 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>>>>>>>>>>>>> tke...@gmail.com: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Stop weewx >>>>>>>>>>>>>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>>>>>>>>>>>>> Restart weewx >>>>>>>>>>>>>>>>>>>>> Post the log from startup. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN < >>>>>>>>>>>>>>>>>>>>> ton...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with >>>>>>>>>>>>>>>>>>>>>> PuttySSH >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef >>>>>>>>>>>>>>>>>>>>>> Ton vanN: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>>>>>>>>>>>>> Have the main progam as simulator up and running (= >>>>>>>>>>>>>>>>>>>>>>> see files updating in folder public_html ). >>>>>>>>>>>>>>>>>>>>>>> Now trying to implement a template to generate an >>>>>>>>>>>>>>>>>>>>>>> uploadfile for HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>>> [has been discussed earlier in this forum, but that >>>>>>>>>>>>>>>>>>>>>>> discussion apparently not ending with working solution] >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Template [attached in zip-file] should generate a >>>>>>>>>>>>>>>>>>>>>>> htm-file. >>>>>>>>>>>>>>>>>>>>>>> For activation of the template I inserted the >>>>>>>>>>>>>>>>>>>>>>> following text in >>>>>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of >>>>>>>>>>>>>>>>>>>>>>> the section CheetahGenerator >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> [[HWA]] >>>>>>>>>>>>>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>>>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>>>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Would expect the generated htm-file to appear in >>>>>>>>>>>>>>>>>>>>>>> folder public_html >>>>>>>>>>>>>>>>>>>>>>> When running WeeWX no errors (which is OK), but also >>>>>>>>>>>>>>>>>>>>>>> nowhere the expected htm-file: >>>>>>>>>>>>>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>>>>>>>>>>>>> to the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>> >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>>>> in the Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe >>>>>>>>>>>> . >>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>> email to weewx-user+...@googlegroups.com. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>> =============================================================== >>>>>>>>>>>> Contactinfo voor Anton van Nieuwenhuijzen: >>>>>>>>>>>> Email = ton...@gmail.com >>>>>>>>>>>> Fax2Mail = (+31/0)84.8397303 <+31%2084%20839%207303> [ook >>>>>>>>>>>> Voice2Mail] >>>>>>>>>>>> =============================================================== >>>>>>>>>>>> Deze E-mail en eventuele aanhangende files zijn >>>>>>>>>>>> alleen bestemd voor de geadresseerde(n). >>>>>>>>>>>> Als je deze E-mail ten onrechte hebt ontvangen, >>>>>>>>>>>> dan aub verwijderen en de afzender informeren. >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>> >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> >>>> >>>> -- >>>> Peter Quinn >>>> (415)794-2264 <(415)%20794-2264> >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > > > -- > Peter Quinn > (415)794-2264 <(415)%20794-2264> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9552e8c0-c70b-4b6a-ab5e-775f03c5ffe7n%40googlegroups.com.
