Lonnie sells his war in a rootenna waiting to go.
Support is offered via the online forums.
George
Matt Liotta wrote:
I understand you are suggesting I wouldn't have to psychically build the
devices, but that isn't what I am worried about. I want an off-the-shelf
product that is supported by a vendor. That includes it being pre-built,
software installed, and support available.
-Matt
Sam Tetherow wrote:
If you order it all from wisp-router they will assemble it for your so
you would get a die-cast case with the RB mounted the radios and
pigtails installed. All you would need to do is set up the software
end of things, which could be done with a script once you have the
initial setup done. One thing to note, I have not ordered 5Ghz
pigtails from wisp-router in quite sometime, but the last time I did
order them, their quality was questionable.
I would bet if you went the WRAP/StarOS route wisp-router would do the
same. No idea on other vendors or the WAR boards as I have never
ordered them.
Sam Tetherow
Sandhills Wireless
Matt Liotta wrote:
I am looking for a device I can buy that does all of this out of the
box. I don't want to build my own since I need 30-40 of them in the
next 30 days.
-Matt
Sam Tetherow wrote:
Mikrotik on a routerboard 532 should do the trick although I haven't
messed with the VLAN stuff.
I am not a StarOS user, but I would bet that a StarOS setup on
either a WRAP or WAR board would work
as well.
Sam Tetherow
Sandhills Wireless
Matt Liotta wrote:
I am looking for a device with the following requirements:
* Can backhaul at >11Mbps operating in the 5.2Ghz band
* Can support VLANs
* Can assign a VLAN to one Ethernet port
* Powered by PoE (the standard is not required)
* Can act as a 2.4Ghz Wi-Fi access point assigned to a different
VLAN than the Ethernet port
* Everything in a single outdoor enclosure
Any ideas?
-Matt
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/