>From our experience, we believe it is not possible. However, had a related question...
We have found processing power to be a big issue to enable full throughput of APs My understanding is that the 532 is being replaced with the 600 series, that also supports the daughterboard.. (Disclaimer: rough estimates below, without specifying configurations, exact results on routerboard's website). 532a (266-400mhz MIPs)was quoted around 10-15,000 pps. 433AH (roughtly 700Mhz Atheros) around 30-40,000 pps. 600 series (200-400mhz PowerPC NetProc) was quoted around 50-60,000 pps. So its understandable the 433AH would outperform the 532. Question is.... Why does teh 600 series outperform them all, when it has the slowest processor in MHZ? Are Mikrotik's 532a speeds test at 266 or 400Mhz? And the 600 series at 200 or 400? They did specify on their report. Is the 600's Power PC's processor really that much better that it gets so much better speed at slower Mhz? Or is it just the design of the board that accommodates GB NICs and DDR RAM? I just wanted to get some feedback from people on whether the 600 series really are faster than the 433AH boards. The 600s do have other advantages jsutifying their higher price, but thats not related to my question. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "Jason Hensley" <[EMAIL PROTECTED]> To: "'WISPA General List'" <wireless@wispa.org>; <[EMAIL PROTECTED]> Sent: Monday, July 14, 2008 9:14 PM Subject: [WISPA] RB532 and 40MBps > Hey all Mikrotik gurus. Is it possible to pull 40meg+ through an RB532 > with > NAT'ing (masquerade) turned on? Total of 3 in-house systems running > through > this one - not a lot going on with it - but I'm having trouble pulling > much > more than 10 through it. Have narrowed it down to the 532 I've got as my > router. > > If it's not possible no problem - I have other options. If it is, then > any > suggestions as to what might be the problem? I've been through the > duplexing / speed possibilities already and have tested in front of, and > behind, the 532. Can pull what I've got (40meg give or take) without the > Mik but again, can only get 10 through the 532. > > Thanks in advance! > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
