Where do you get or call those 1ft long wires?

Mark McElvy
 


-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent: Monday, October 19, 2009 9:09 AM
To: WISPA General List
Subject: Re: [WISPA] Gotta Have

Travis,

If you'll go through $200 per month in connectors these will save you at
least $500 in labor. 

It takes less than half the time to make a connection and they are NEVER
wrong.  These and the Times LMR400 stripper have been some of the best
tools I've ever purchased.

Those and a 1' long "wire" that slips just inside a cat5 cable so that
it can easily be pushed through a wall without getting hung up on the
insulation etc.

Laters,
marlon

  ----- Original Message ----- 
  From: Travis Johnson 
  To: WISPA General List 
  Sent: Sunday, October 18, 2009 2:00 PM
  Subject: Re: [WISPA] Gotta Have


  These do look great... and I would love to buy them for my
installers... but $.50 per connector compared to what I pay now would
cost me an extra $200 per month just in connectors. :(

  Travis
  Microserv

  Mike wrote: 
They DO sell shielded. Part PLT-100020-050
  Look further down the list at: www.ezrj45.com


At 11:13 AM 10/18/2009, you wrote:
  Yeah, those are awesome.  I wish they had shielded connectors as well.

marlon

----- Original Message -----
From: "Mike" <m...@aweiowa.com>
To: "WISPA General List" <wireless@wispa.org>
Sent: Sunday, October 18, 2009 7:01 AM
Subject: [WISPA] Gotta Have


    I have learned a lot from this list.  I think there is some real
talent lurking here.  We all have discovered certain things which
just make life as a WISP easier.  I think it would be beneficial to
list participants in general if there was a thread which contained a
description and use of something you find invaluable -- hardware,
software etc ... you would like to share with the group.

I'll start:

what: EZRJ-45 connector system
where: www.ezrj45.com
why:  As my eyes get older, and especially in low light situations, I
find it very difficult to get all those individual conductors on a
CAT5 run in the right order while crimping an end.  This is a quite
ingenious system.  The plugs have holes all the way through.  You can
verify the color code easily BEFORE crimping and cutting the
tags.  It takes a special crimp tool which has a pair of blades that
cut the tags as it crimps the connector in place.  Maybe not a time
saver in my case, but definitely a GRIEF saver.  I've not miswired an
Ethernet plug since I started using this system.

Mike





 
------------------------------------------------------------------------
--------
    WISPA Wants You! Join today!
http://signup.wispa.org/

 
------------------------------------------------------------------------
--------
    WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
      
------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------

WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
    

------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

  

------------------------------------------------------------------------
------




 
------------------------------------------------------------------------
--------
  WISPA Wants You! Join today!
  http://signup.wispa.org/
 
------------------------------------------------------------------------
--------
   
  WISPA Wireless List: wireless@wispa.org

  Subscribe/Unsubscribe:
  http://lists.wispa.org/mailman/listinfo/wireless

  Archives: http://lists.wispa.org/pipermail/wireless/


------------------------------------------------------------------------
--------
WISPA Wants You! Join today!
http://signup.wispa.org/
------------------------------------------------------------------------
--------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to