A piece of 12 gauge solid copper wire always worked for me Daniel White 3-dB Networks http://www.3dbnetworks.com
>-----Original Message----- >From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >Behalf Of Mark McElvy >Sent: Monday, October 19, 2009 8:19 AM >To: WISPA General List >Subject: Re: [WISPA] Gotta Have > >Where do you get or call those 1ft long wires? > >Mark McElvy > > > >-----Original Message----- >From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >Behalf Of Marlon K. Schafer >Sent: Monday, October 19, 2009 9:09 AM >To: WISPA General List >Subject: Re: [WISPA] Gotta Have > >Travis, > >If you'll go through $200 per month in connectors these will save you at >least $500 in labor. > >It takes less than half the time to make a connection and they are NEVER >wrong. These and the Times LMR400 stripper have been some of the best >tools I've ever purchased. > >Those and a 1' long "wire" that slips just inside a cat5 cable so that >it can easily be pushed through a wall without getting hung up on the >insulation etc. > >Laters, >marlon > > ----- Original Message ----- > From: Travis Johnson > To: WISPA General List > Sent: Sunday, October 18, 2009 2:00 PM > Subject: Re: [WISPA] Gotta Have > > > These do look great... and I would love to buy them for my >installers... but $.50 per connector compared to what I pay now would >cost me an extra $200 per month just in connectors. :( > > Travis > Microserv > > Mike wrote: >They DO sell shielded. Part PLT-100020-050 > Look further down the list at: www.ezrj45.com > > >At 11:13 AM 10/18/2009, you wrote: > Yeah, those are awesome. I wish they had shielded connectors as well. > >marlon > >----- Original Message ----- >From: "Mike" <m...@aweiowa.com> >To: "WISPA General List" <wireless@wispa.org> >Sent: Sunday, October 18, 2009 7:01 AM >Subject: [WISPA] Gotta Have > > > I have learned a lot from this list. I think there is some real >talent lurking here. We all have discovered certain things which >just make life as a WISP easier. I think it would be beneficial to >list participants in general if there was a thread which contained a >description and use of something you find invaluable -- hardware, >software etc ... you would like to share with the group. > >I'll start: > >what: EZRJ-45 connector system >where: www.ezrj45.com >why: As my eyes get older, and especially in low light situations, I >find it very difficult to get all those individual conductors on a >CAT5 run in the right order while crimping an end. This is a quite >ingenious system. The plugs have holes all the way through. You can >verify the color code easily BEFORE crimping and cutting the >tags. It takes a special crimp tool which has a pair of blades that >cut the tags as it crimps the connector in place. Maybe not a time >saver in my case, but definitely a GRIEF saver. I've not miswired an >Ethernet plug since I started using this system. > >Mike > > > > > > >------------------------------------------------------------------------ >-------- > WISPA Wants You! Join today! >http://signup.wispa.org/ > > >------------------------------------------------------------------------ >-------- > WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > >------------------------------------------------------------------------ >-------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >------------------------------------------------------------------------ >-------- > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > > >------------------------------------------------------------------------ >-------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >------------------------------------------------------------------------ >-------- > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > >------------------------------------------------------------------------ >------ > > > > > >------------------------------------------------------------------------ >-------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > >------------------------------------------------------------------------ >-------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > >------------------------------------------------------------------------ >-------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >------------------------------------------------------------------------ >-------- > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > > >------------------------------------------------------------------------ >-------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >------------------------------------------------------------------------ >-------- > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/