On 02/21/2015 02:52 AM, Joe Taylor wrote: Hi Joe,
> If your transceiver dial frequency set to 10.138000 MHz, USB mode, WSPR > activity should be found between 2100 Hz and 2300 Hz on the WSJT-X > waterfall. See the attached screen shot, made with my setup. Many thanks, Joe. > WSPR signals are about 1/3 the width of JT9 signals, and they last for > almost two full minutes. They are found under the orange-colored bar, > which (on the 30 m band) is the "forbidden" region where WSJT-X refuses > to transmit. > > If you find WSJT stations well outside the range 2100-2300 Hz, I can > only conclude that your dial calibration is off by much more than 6 Hz. > Or perhaps we are mis-communicating in some way that I do not understand? Many thanks for this very important information. Now, I was able to find the source of the problem. When switching from USB to PKTUSB mode, my transceiver introduced an addition offset of 1 kHz. When USB mode was used, all was OK, but when using PKTUSB, this 1 kHz offset produced this wrong frequency display. I was able to change this offset in the menu of my transceiver. Now, there is no more offset between USB and PKTUSB. Many thanks again for your nice help. Best 88 de Claude ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
