Hallo, Installing program was easy, but all the rest worse. Using ICOM IC-7200 with connection to rig via USB ( Silicon Labs CP210x USB to UART Bridge) like all other ICOM 7200 and 7600 users. That has worked fine with all versions of WSJT/WSPR except for this last version of WSJT-X. ' Settings feels like a random happening sometimes. Options are there sometimes and sometimes not. I used: CAT Control Serial port COM8 (as usual) 19200 baud 8bits one stop bit no handshake (all as usual) PTT method CAT Port Com8 (fixed via a roundabout way, not needed in the older versions .... perhaps neither here ?) Transmit Audio Source: Rig set to data mode expecting info via USB. Setting Rear/Data ( fixed in a very roundabout way as it was not reachable and initially set to Front/MIc) Mode USB (tried the other two settings with no luck) Split Op None Test CAT was OK Test PTT was OK RX works fine TX starts with resetting audio out to 0 that is no TX TX sometimes go on for ever As I understand it you have changed code to control audio out setting and rig control compared to all the other versions
All the best Hans sm0vyi
------------------------------------------------------------------------------
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
