OK much to digest ... rapid reading I found nothing new to what I have tested. WIll reread slowly and check. I will be back with report Hans
9 juni 2015, Bill Somerville <g4...@classdesign.com> skrev: > Hi Again Hans, > > I forgot to mention, > > on Icom rigs you must disable "CI-V Transceive" mode in the rig menu. That > mode is on by default but it generates unsolicited CAT traffic which causes > data collisions and lost CAT conversations. > > 73 > Bill > G4WJS. > > On 09/06/2015 21:50, Bill Somerville wrote: > > > On 09/06/2015 21:24, <hlundst...@sk0mt.net> wrote: > > > > > > > > > > Hallo,Hi Hans, > > > > > > > > Installing program was easy, but all the rest worse.Sorry you are having > > > some issues with WSJT-X. > > > > > > > > Using ICOM IC-7200 with connection to rig via USB ( Silicon Labs CP210x > > > USB to UART Bridge) like all other ICOM 7200 and 7600 users. That has > > > worked fine with all versions of WSJT/WSPR except for this last version > > > of WSJT-X. > > > ' > > > Settings feels like a random happening sometimes. Options are there > > > sometimes and sometimes not. > > > I used: > > > CAT Control > > > Serial port COM8 (as usual) > > > 19200 baud 8bits one stop bit no handshake (all as usual) > > > PTT method CAT Port Com8 (fixed via a roundabout way, not needed in the > > > older versions .... perhaps neither here ?)WSJT-X now allows PTT through > > > the CAT port using serial lines RTS or DTR, or via another serial port > > > using RTS or DTR or if your rig supports it, via a CAT command. Your rig > > > has the capability to SEND with a CAT command and I recommend that method > > > to you. > > > > Set the PTT Method to CAT. > > > > > > > > Transmit Audio Source: Rig set to data mode expecting info via USB. > > > Setting Rear/Data ( fixed in a very roundabout way as it was not > > > reachable and initially set to Front/MIc)Some rigs use a different CAT > > > command to take transmit audio from the read data connection, the setting > > > is there for those rigs and it is only enabled for those rigs. Icom rigs > > > select the Tx audio source according to the rig modulation mode and via > > > rig menu settings. I believe the 7200 takes Tx audio from the rear data > > > socket when USB-DATA mode is selected. You need to change the rig setting > > > "Modulation input (Data on)" to U(USB) to take Tx audio from the USB > > > audio driver. > > > > > > > > Mode USB (tried the other two settings with no luck)None - doesn't change > > > the mode of your rig. USB sets the mode to USB. Data/Pkt sets the mode of > > > your rig to Data. The latter is the best choice so long as you have > > > selected the correct Tx audio source in your rig menu. > > > > > > > > Split Op None > > > Test CAT was OK > > > Test PTT was OK > > > RX works fine > > > TX starts with resetting audio out to 0 that is no TXIn recent Windows > > > you must set speaker volume sliders while the device is active. I > > > recommend setting the level for Tx from teh USB audio driver from your > > > rig menu item "USB Level". > > > > > > > > TX sometimes go on for everIf you can provide repeatable steps to > > > demonstrate that issue please report them here, > > > > > > > > As I understand it you have changed code to control audio out setting and > > > rig control compared to all the other versionsYes we use a new audio > > > subsystem that works much better and is more consistent across all the > > > platforms we support. Also with rig control, because advanced dual mode > > > JT9+JT65 and soon to be released EME Doppler tracking features need tight > > > and accurate transceiver control, much work has been done to improve the > > > stability of CAT and PTT functionality. > > > > > > > > All the best Hans sm0vyi73 > > Bill > > G4WJS. > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > <wsjt-devel@lists.sourceforge.net> > > <https://lists.sourceforge.net/lists/listinfo/wsjt-devel> > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > wsjt-devel mailing list > <wsjt-devel@lists.sourceforge.net> > <https://lists.sourceforge.net/lists/listinfo/wsjt-devel> >
------------------------------------------------------------------------------
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel