Please read messages to the list before sending your own on the same topic!
Please read the announcement abou -rc5:
"Windows users will discover that WSJT-X v2.1.0 has been made available
as a 64-bit MS Windows build for 64-bit versions of Windows since Vista.
This version has one known defect. The audio input device level will be
reset to 100% when WSJT-X is started, when the input audio device is
changed, and when switching to a new configuration. This is a Qt
framework defect that we have reported and is being fixed in a future
release; until then users should take care to set the device audio level
back to 0dB or lower depending on requirements. Note that many sound
cards and chips have real gain ahead of the ADC, as much as 14dB, which
will be turned to the maximum due to this defect and is usually
undesirable when using WSJT-X.
"Despite this annoying defect, we recommend the 64-bit version of WSJT-X
on MS Windows as it has significant advantages in decoding speed."
-- 73, Joe, K1JT
On 4/30/2019 14:53, Enrique Scheuer wrote:
Same problem here with the same operational conditions.
de Enrique
PY2CP
Em ter, 30 de abr de 2019 às 15:31, Paul Kube <paul.k...@gmail.com
<mailto:paul.k...@gmail.com>> escreveu:
Looking at this ("Microphone Properties" for the USB Audio Codec
that the IC-7300 provides and that WSJT-X uses as input):
miclevel.png
It gets set to 100% whenever WSJT-X 2.1.0-rc5 starts, and I have to
set it to 40% "by hand". WSJT-X 2.0.1 did not have this issue.
Windows 10 Pro x64 here.
73, Paul K6PO
On Tue, Apr 30, 2019 at 5:48 AM Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
Are you guys looking at the dB level in the audio management
panel? Or the % level?
WSJT-X does not touch the audio so it has to be Windows doing it.
Recording audio should be at 0dB.
de Mike W9MDB
On Tuesday, April 30, 2019, 6:55:30 AM CDT, kf8my--- via
wsjt-devel <wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
It also does it in Win7, audio sound recording to max on restart.
Mike/kf8my
-----Original Message-----
From: Joe, LB1HI <jo...@lb1hi.no <mailto:jo...@lb1hi.no>>
To: wsjt-devel <wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>>
Sent: Tue, Apr 30, 2019 6:46 am
Subject: [wsjt-devel] Another observed drawback - audio input level
Hi,
Another observed drawback is that after each WSJT-X restart,
previously
pre-set audio (Win 10 64 bit) signal input level of the sound card
changes. It changes spontaneously. It changes to a maximum -
100% of
the level setting range.
73`s Joe
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
