FWIW .. Mike recommended a few years ago at least that you change the
properties from showing a PERCENTAGE to a dB level.   I have mine set to
0 dB on the properties, and have not see the issues others are seeing
with the 64 bit version.

I am using an external USB soundcard with the system (Sound Blaster xFi)
which may be the reason I'm not seeing the issues, but I'm thinking its
more the property setting.

Neil, KN3iLZ

On 4/30/2019 2:53 PM, Enrique Scheuer wrote:
Same problem here with the same operational conditions.

de Enrique
PY2CP

Em ter, 30 de abr de 2019 às 15:31, Paul Kube <paul.k...@gmail.com
<mailto:paul.k...@gmail.com>> escreveu:

    Looking at this ("Microphone Properties" for the USB Audio Codec
    that the IC-7300 provides and that WSJT-X uses as input):

    miclevel.png

    It gets set to 100% whenever WSJT-X 2.1.0-rc5 starts, and I have
    to set it to 40% "by hand". WSJT-X  2.0.1 did not have this issue.

    Windows 10 Pro x64 here.

    73, Paul K6PO


    On Tue, Apr 30, 2019 at 5:48 AM Black Michael via wsjt-devel
    <wsjt-devel@lists.sourceforge.net
    <mailto:wsjt-devel@lists.sourceforge.net>> wrote:

        Are you guys looking at the dB level in the audio management
        panel?  Or the % level?
        WSJT-X does not touch the audio so it has to be Windows doing it.

        Recording audio should be at 0dB.

        de Mike W9MDB




        On Tuesday, April 30, 2019, 6:55:30 AM CDT, kf8my--- via
        wsjt-devel <wsjt-devel@lists.sourceforge.net
        <mailto:wsjt-devel@lists.sourceforge.net>> wrote:


        It also does it in Win7, audio sound recording to max on restart.
        Mike/kf8my



        -----Original Message-----
        From: Joe, LB1HI <jo...@lb1hi.no <mailto:jo...@lb1hi.no>>
        To: wsjt-devel <wsjt-devel@lists.sourceforge.net
        <mailto:wsjt-devel@lists.sourceforge.net>>
        Sent: Tue, Apr 30, 2019 6:46 am
        Subject: [wsjt-devel] Another observed drawback - audio input
        level

        Hi,
        Another observed  drawback is that after each WSJT-X restart,
        previously
        pre-set audio (Win 10 64 bit) signal input level of the sound
        card
        changes. It changes spontaneously. It changes to a maximum  -
        100% of
        the  level setting range.

        73`s Joe



        _______________________________________________
        wsjt-devel mailing list
        wsjt-devel@lists.sourceforge.net
        https://lists.sourceforge.net/lists/listinfo/wsjt-devel
        _______________________________________________
        wsjt-devel mailing list
        wsjt-devel@lists.sourceforge.net
        <mailto:wsjt-devel@lists.sourceforge.net>
        https://lists.sourceforge.net/lists/listinfo/wsjt-devel
        _______________________________________________
        wsjt-devel mailing list
        wsjt-devel@lists.sourceforge.net
        <mailto:wsjt-devel@lists.sourceforge.net>
        https://lists.sourceforge.net/lists/listinfo/wsjt-devel

    _______________________________________________
    wsjt-devel mailing list
    wsjt-devel@lists.sourceforge.net
    <mailto:wsjt-devel@lists.sourceforge.net>
    https://lists.sourceforge.net/lists/listinfo/wsjt-devel



---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to