Please be considerate of others. We don't speak or understand english
very well but are venting our ideas on this list in good faith.
Else simply delist all foreigners
73
Serge F6BHK
On 30/04/2019 21:10, Joe Taylor wrote:
Please read messages to the list before sending your own on the same
topic!
Please read the announcement abou -rc5:
"Windows users will discover that WSJT-X v2.1.0 has been made
available as a 64-bit MS Windows build for 64-bit versions of Windows
since Vista. This version has one known defect. The audio input device
level will be reset to 100% when WSJT-X is started, when the input
audio device is changed, and when switching to a new configuration.
This is a Qt framework defect that we have reported and is being fixed
in a future release; until then users should take care to set the
device audio level back to 0dB or lower depending on requirements.
Note that many sound cards and chips have real gain ahead of the ADC,
as much as 14dB, which will be turned to the maximum due to this
defect and is usually undesirable when using WSJT-X.
"Despite this annoying defect, we recommend the 64-bit version of
WSJT-X on MS Windows as it has significant advantages in decoding speed."
-- 73, Joe, K1JT
On 4/30/2019 14:53, Enrique Scheuer wrote:
Same problem here with the same operational conditions.
de Enrique
PY2CP
Em ter, 30 de abr de 2019 às 15:31, Paul Kube <paul.k...@gmail.com
<mailto:paul.k...@gmail.com>> escreveu:
Looking at this ("Microphone Properties" for the USB Audio Codec
that the IC-7300 provides and that WSJT-X uses as input):
miclevel.png
It gets set to 100% whenever WSJT-X 2.1.0-rc5 starts, and I have to
set it to 40% "by hand". WSJT-X 2.0.1 did not have this issue.
Windows 10 Pro x64 here.
73, Paul K6PO
On Tue, Apr 30, 2019 at 5:48 AM Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
Are you guys looking at the dB level in the audio management
panel? Or the % level?
WSJT-X does not touch the audio so it has to be Windows doing
it.
Recording audio should be at 0dB.
de Mike W9MDB
On Tuesday, April 30, 2019, 6:55:30 AM CDT, kf8my--- via
wsjt-devel <wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
It also does it in Win7, audio sound recording to max on
restart.
Mike/kf8my
-----Original Message-----
From: Joe, LB1HI <jo...@lb1hi.no <mailto:jo...@lb1hi.no>>
To: wsjt-devel <wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>>
Sent: Tue, Apr 30, 2019 6:46 am
Subject: [wsjt-devel] Another observed drawback - audio input
level
Hi,
Another observed drawback is that after each WSJT-X restart,
previously
pre-set audio (Win 10 64 bit) signal input level of the sound
card
changes. It changes spontaneously. It changes to a maximum -
100% of
the level setting range.
73`s Joe
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
73, de Serge
F6BHK, ex-VR2LL, G5BHT, FM5GC
PUY SAINT MARTIN, 26 DROME, FRANCE
JN24LP
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
