[Bug 1937024] Re: xrdp log created with wrong permissions

[Jose Mari]

Hi,

Please, mark it as solved.


I've tested in 24.04 (desktop) and has been corrected:  xrdp does not start if 
log not correctly configured (permissions).

root@ubuntu:/var/log# ls -l xrdp*
-rw-r- 1 root adm 2322 May  3 10:09 xrdp-sesman.log
-rw-r- 1 xrdp adm 9139 May  3 10:08 xrdp.log

toot@ubuntu:/var/log# systemctl restart xrdp
Job for xrdp.service failed because the control process exited with error code.
See "systemctl status xrdp.service" and "journalctl -xeu xrdp.service" for 
details.

root@ubuntu:/var/log# journalctl -xeu xrdp.service
(...)
░░ The job identifier is 3708.
May 03 10:10:06 ubuntu xrdp[9049]: Could not start log
May 03 10:10:06 ubuntu xrdp[9049]: Could not start log
May 03 10:10:06 ubuntu xrdp[9049]: error opening log file [The log is not 
properly started]. quitting.
May 03 10:10:06 ubuntu systemd[1]: xrdp.service: Control process exited, 
code=exited, status=1/FAILURE
(...)

Thanks!!!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xrdp/+bug/1937024/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Geoserver-users] Geoserver Rendering Transformations: Current Arrows problem

[Riccardo Mari]

HI,
Thank you all for the time you are putting into this issue.
Available for any tests, regards, Riccardo Mari

Il giorno lun 12 feb 2024 alle ore 23:55 Jody Garnett <
jody.garn...@gmail.com> ha scritto:

> Okay thanks, let's see what changed between 2.16.2 and 2.16.3 ...
>
> I am going to share links so that other devs can have a look, I hope we
> can get a clear bug report to help making a fix easier.
>
>
> Looking at GeoServer 2.16.3 release notes this looks likely:
>
> GEOS-9036 <https://osgeo-org.atlassian.net/browse/GEOS-9036> Some
> rendering transformations do not benefit from advanced projection handling
> and dateline wrapping
>
> The fix above is implemented by GeoTools (which does the drawing):
>
> GEOT-6313 <https://osgeo-org.atlassian.net/browse/GEOT-6313> Raster to
> Vector rendering transforms do not respect continuous map wrapping
>
> The following pull requests mention GEOT-6313:
>
> [GEOT-6636] Raster to Vector rendering transformations can lose nodata
> values when crossing the dateline
> <https://github.com/geotools/geotools/pull/3007>
>
>- Updates RasterAsPointCollectionProcessTest
>
>
> [GEOT-6313]: Fixes wrapping on RenderingTransformation
> <https://github.com/geotools/geotools/pull/2752>
>
>- Has changes in StreamingRenderer around projection handling
>- Has more tests for RasterAsPointCollectionProcessTest
>
>
> [GEOT-6313] Support raster-to-vector rendering transforms across the
> dateline <https://github.com/geotools/geotools/pull/2419>
>
>- I see a test case for RasterAsPointCollectionProcessTest being
>defined, but no changes to the function
>
>
> I do not think it is your SLD in error, and expect these changes are where
> the regression is occurring.
> I am not familiar enough with this area of the code to immediately see the
> problem and make a quick fix.
>
> Can I ask you to make a bug report with what we have learned in this email
> thread please.
> --
> Jody Garnett
>
>
> On Feb 12, 2024 at 1:56:04 PM, Alen Arturo Dioses Avellaneda <
> alen.dio...@gmail.com> wrote:
>
>> HI everyone
>>
>> I have the same problem with windbars using sld provided in this geosolutions
>> example
>> <https://geoserver.geosolutionsgroup.com/edu/en/multidim/accessing_multidim/rtx/wind_barbs.html>
>> , as suggested I looked for the version where the problem begins, it is
>> version 2.16.3, change log are in an empty JIRA webpage, but announcement
>> says the following:
>>
>> As Riccardo mentioned, the resampling function that uses
>> wms_scale_denominator works fine for every EPSG code previous 2.16.3
>> version, but from that only works for EPSG:4326.
>>
>> I would appreciate any suggestion to understand what happened  so use the
>> best possible solution in the sld.
>>
>>
>>
>> [image: image.png]
>>
>> Regards,
>> Alen Dioses
>>
>>
>>
>> El vie, 2 feb 2024 a las 11:10, Jody Garnett ()
>> escribió:
>>
>>> Is this a regression? If so you should report the problem ...
>>>
>>> But before you do perhaps some research: Going from 2.16.1 to 2.24.2 is
>>> a lot of changes; you should review the release notes for any thing
>>> affecting WMS scale calculations.
>>>
>>> It would help *a lot* if you can identify exactly what version of
>>> GeoServer this regression occurs in!
>>> --
>>> Jody Garnett
>>>
>>>
>>> On Wed, Jan 31, 2024 at 5:56 AM Riccardo Mari  wrote:
>>>
>>>> Hi everyone,
>>>> I'm writing to you because I have a problem with a sld style that
>>>> displays currents direction using the ras:RasterAsPointCollection function.
>>>> In recent days I have updated geoserver from version 2.16.1 to version
>>>> 2.24.2 and everything works as before except for the rendering
>>>> transformation.
>>>> The ras:RasterAsPointCollection and wms_scale_denominator variable
>>>> works correctly (scales the points based on the zoom) only for EPSG:4326
>>>> while for other EPSG codes the interpolation does not work.
>>>> I also tried with version 2.24.1 and 2.23.4.
>>>> At this link you can find the style and some example data.
>>>>
>>>> https://drive.google.com/drive/folders/1fmRNMVjO834OiGfcfQXtQoBgPLSx5QG9?usp=sharing
>>>>
>>>> Could the problem be caused by the style or is it a geoserver/geotools
>>>> issue?
>>>> Thanks in advance for the support, regards, Riccardo
>>>>

Re: GNUstep bi-monthly Meeting Reminder...

[Tito Mari Francis Escaño]

I was able to join briefly and saw Richard Frith-McDonald and Ricardo
there, but it's wee hours in the morning almost 2AM in the Philippines and
I have Sunday commitments so I left shortly after.

On Sun, Feb 11, 2024 at 1:51 AM Fred Kiefer  wrote:

> Not that I know of. I don’t want to be the moderator as I have to leave
> soon. i wait for five more minutes and give up then.
>
> Cheers,
> Fred
>
> > Am 10.02.2024 um 18:47 schrieb lars.sonchocky-helld...@hamburg.de:
> >
> > Has the meeting be canceled again?
> >
> > Kind regards,
> >
> > Lars
> >
> >> Am 08.02.2024 um 00:11 schrieb Gregory Casamento <
> greg.casame...@gmail.com>:
> >>
> >> The meeting is on the 10th which is this saturday.   Here is the link:
> >>
> >> https://meet.jit.si/TheatricalNecessitiesFormulateNotably
> >> The meeting is open to everyone.  Please feel free to attend.  It
> starts at 12:30EST and goes to 2:30PM EST.   This is an informal meeting,
> though we may discuss some important topics.
> >>
> >> Yours, GC
> >> --
> >> Gregory Casamento
> >> GNUstep Lead Developer / OLC, Principal Consultant
> >> http://www.gnustep.org - http://heronsperch.blogspot.com
> >> https://www.patreon.com/bePatron?u=352392 - Become a Patron
> >> https://www.openhub.net/languages/objective_c - OpenHub standings
> >
>
>
>

GNUstep back and base in OpenBSD 7.4 ARM

[Tito Mari Francis Escaño]

Hi misc,
I was hoping to install GNUstep packages in ARM but it seems gnustep-back
and gnustep-base are not yet available in ARM.
I was under the impression that these are needed to start basic GNUstep
development.
Please advise what options are available to move forward.
Also addressed to Sebastian Reitenbach.
Thank you.

Re: [Geoserver-users] Geoserver Rendering Transformations: Current Arrows problem

[Riccardo Mari]

Hi list,
I temporarily solved the issue by changing part of the sld style like this:

...
 
   scale
   
 
   wms_scale_denominator
 

 1000
 0.035

   
 
...

The style now works for all EPSG codes except 4326.
I'm waiting for any suggestions.
Regards,
Riccardo

Il giorno mer 31 gen 2024 alle ore 14:53 Riccardo Mari 
ha scritto:

> Hi everyone,
> I'm writing to you because I have a problem with a sld style that displays
> currents direction using the ras:RasterAsPointCollection function.
> In recent days I have updated geoserver from version 2.16.1 to version
> 2.24.2 and everything works as before except for the rendering
> transformation.
> The ras:RasterAsPointCollection and wms_scale_denominator variable works
> correctly (scales the points based on the zoom) only for EPSG:4326 while
> for other EPSG codes the interpolation does not work.
> I also tried with version 2.24.1 and 2.23.4.
> At this link you can find the style and some example data.
>
> https://drive.google.com/drive/folders/1fmRNMVjO834OiGfcfQXtQoBgPLSx5QG9?usp=sharing
>
> Could the problem be caused by the style or is it a geoserver/geotools
> issue?
> Thanks in advance for the support, regards, Riccardo
>
> Operating system: Ubuntu 22.04.3 LTS
> JVM Version: Oracle Corporation: 11.0.21 (Java HotSpot(TM) 64-Bit Server
> VM)
> Java Rendering Engine: org.marlin.pisces.DMarlinRenderingEngine
> Apache Tomcat/9.0.34
>
> GeoServer Version
> 2.24.2
> Git Review
> aa2a760b636c4ead6c58552ade504c3757d11853
> Build Date
> 24-Jan-2024 01:06
> GeoTools version
> 30.2 (rev 99a69a425ff41183938de794148484b76215e127)
> GeoWebCache Version
> 1.24.2 (rev 1.24.x/e0244e10e3a24f1a79168c992d957784b3230209)
>
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

[Geoserver-users] Geoserver Rendering Transformations: Current Arrows problem

[Riccardo Mari]

Hi everyone,
I'm writing to you because I have a problem with a sld style that displays
currents direction using the ras:RasterAsPointCollection function.
In recent days I have updated geoserver from version 2.16.1 to version
2.24.2 and everything works as before except for the rendering
transformation.
The ras:RasterAsPointCollection and wms_scale_denominator variable works
correctly (scales the points based on the zoom) only for EPSG:4326 while
for other EPSG codes the interpolation does not work.
I also tried with version 2.24.1 and 2.23.4.
At this link you can find the style and some example data.
https://drive.google.com/drive/folders/1fmRNMVjO834OiGfcfQXtQoBgPLSx5QG9?usp=sharing

Could the problem be caused by the style or is it a geoserver/geotools
issue?
Thanks in advance for the support, regards, Riccardo

Operating system: Ubuntu 22.04.3 LTS
JVM Version: Oracle Corporation: 11.0.21 (Java HotSpot(TM) 64-Bit Server VM)
Java Rendering Engine: org.marlin.pisces.DMarlinRenderingEngine
Apache Tomcat/9.0.34

GeoServer Version
2.24.2
Git Review
aa2a760b636c4ead6c58552ade504c3757d11853
Build Date
24-Jan-2024 01:06
GeoTools version
30.2 (rev 99a69a425ff41183938de794148484b76215e127)
GeoWebCache Version
1.24.2 (rev 1.24.x/e0244e10e3a24f1a79168c992d957784b3230209)
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Re: ConsumeKafka to PublishKafka doesn't keep the order of the messages in the destination topic

[edi mari]

Hi Mark ,
I appreciate your advice. Upon examination, implementing the queue as a
"First In First Out" prioritizer and configuring the load balancing
strategy to "Partition by attribute" with the "kafka.partition" attribute
has proven effective in maintaining the order.

Thanks
Edi

On Fri, Dec 15, 2023 at 9:53 PM Mark Payne  wrote:

> Edi,
>
> Looking at your config again, you’ll want to also ensure that on the
> Publisher, you set the partition to `${kafka.partition}` so that it goes to
> the same partition on the destination system. You’ll also went to ensure
> that you set “Failure Strategy” to “Rollback” - otherwise any failure would
> route to ‘failure’ relationship and change the ordering. You’ll also need
> to limit the concurrent tasks on the publisher to 1 concurrent task, to
> ensure that you’re not sending multiple FlowFiles out of order.
>
> Thanks
> -Mark
>
>
> On Dec 15, 2023, at 2:26 AM, edi mari  wrote:
>
> Hi Mark,
> I tried the combination of FIFO and setting the back pressure to 10k, but
> it didn't preserve the order.
>
> Thanks
> Edi
>
> On Wed, Dec 13, 2023 at 3:47 PM Mark Payne  wrote:
>
>> Hey Edi,
>>
>> By default, nifi doesn’t preserve ordering but you can have it do so by
>> updating the connection’s configuration and adding the First In First Out
>> Prioritizer.
>>
>> Also of note you will want to keep the backpressure threshold set to
>> 10,000 objects rather than increasing it as shown in the image.
>>
>> Thanks
>> Mark
>>
>>
>> Sent from my iPhone
>>
>> On Dec 13, 2023, at 8:19 AM, edi mari  wrote:
>>
>> 
>>
>> Hello ,
>> I'm using NIFI v1.20.0 to replicate 250 million messages between Kafka
>> topics.
>> The problem is that NIFI replicates messages in a non-sequential order,
>> resulting in the destination topic storing messages differently than the
>> source topic.
>>
>> for example
>> *source topic - partition 0*
>> offset:5 key:a value:v1
>> offset:6 key:a value:v2
>> offset:7 key:a value:v3
>>
>> *destination topic - partition 0*
>> offset:5 key:a value:v2
>> offset:6 key:a value:v1
>> offset:7 key:a value:v3
>>
>> The topics are configured with a cleanup policy: compact.
>>
>> I'm using ConsumeKafka and PublishKafka processors to replicate topics.
>>
>> 
>>
>> 
>>
>> 
>>
>> 
>>
>> 
>>
>> Thanks
>> Edi
>>
>>
>

Re: ConsumeKafka to PublishKafka doesn't keep the order of the messages in the destination topic

[edi mari]

Hi Mark,
I tried the combination of FIFO and setting the back pressure to 10k, but
it didn't preserve the order.

Thanks
Edi

On Wed, Dec 13, 2023 at 3:47 PM Mark Payne  wrote:

> Hey Edi,
>
> By default, nifi doesn’t preserve ordering but you can have it do so by
> updating the connection’s configuration and adding the First In First Out
> Prioritizer.
>
> Also of note you will want to keep the backpressure threshold set to
> 10,000 objects rather than increasing it as shown in the image.
>
> Thanks
> Mark
>
>
> Sent from my iPhone
>
> On Dec 13, 2023, at 8:19 AM, edi mari  wrote:
>
> 
>
> Hello ,
> I'm using NIFI v1.20.0 to replicate 250 million messages between Kafka
> topics.
> The problem is that NIFI replicates messages in a non-sequential order,
> resulting in the destination topic storing messages differently than the
> source topic.
>
> for example
> *source topic - partition 0*
> offset:5 key:a value:v1
> offset:6 key:a value:v2
> offset:7 key:a value:v3
>
> *destination topic - partition 0*
> offset:5 key:a value:v2
> offset:6 key:a value:v1
> offset:7 key:a value:v3
>
> The topics are configured with a cleanup policy: compact.
>
> I'm using ConsumeKafka and PublishKafka processors to replicate topics.
>
> 
>
> 
>
> 
>
> 
>
> 
>
> Thanks
> Edi
>
>

Re: ConsumeKafka to PublishKafka doesn't keep the order of the messages in the destination topic

[edi mari]

 In my case, all the NIFI nodes functioned well during the replication so I
guess this is not my case, but it's a good point to consider.

Thanks Phillip

On Wed, Dec 13, 2023 at 4:20 PM Phillip Lord  wrote:

> Perhaps try following this guidance in the docs???
>
> Consumer Partition Assignment
>
> By default, this processor will subscribe to one or more Kafka topics in
> such a way that the topics to consume from are randomly assigned to the
> nodes in the NiFi cluster. Consider a scenario where a single Kafka topic
> has 8 partitions and the consuming NiFi cluster has 3 nodes. In this
> scenario, Node 1 may be assigned partitions 0, 1, and 2. Node 2 may be
> assigned partitions 3, 4, and 5. Node 3 will then be assigned partitions 6
> and 7.
>
> In this scenario, if Node 3 somehow fails or stops pulling data from
> Kafka, partitions 6 and 7 may then be reassigned to the other two nodes.
> For most use cases, this is desirable. It provides fault tolerance and
> allows the remaining nodes to pick up the slack. However, there are cases
> where this is undesirable.
>
> One such case is when using NiFi to consume Change Data Capture (CDC) data
> from Kafka. Consider again the above scenario. Consider that Node 3 has
> pulled 1,000 messages from Kafka but has not yet delivered them to their
> final destination. NiFi is then stopped and restarted, and that takes 15
> minutes to complete. In the meantime, Partitions 6 and 7 have been
> reassigned to the other nodes. Those nodes then proceeded to pull data from
> Kafka and deliver it to the desired destination. After 15 minutes, Node 3
> rejoins the cluster and then continues to deliver its 1,000 messages that
> it has already pulled from Kafka to the destination system. Now, those
> records have been delivered out of order.
>
> The solution for this, then, is to assign partitions statically instead of
> dynamically. In this way, we can assign Partitions 6 and 7 to Node 3
> specifically. Then, if Node 3 is restarted, the other nodes will not pull
> data from Partitions 6 and 7. The data will remain queued in Kafka until
> Node 3 is restarted. By using this approach, we can ensure that the data
> that already was pulled can be processed (assuming First In First Out
> Prioritizers are used) before newer messages are handled.
>
> In order to provide a static mapping of node to Kafka partition(s), one or
> more user-defined properties must be added using the naming scheme
> partitions. with the value being a comma-separated list of
> Kafka partitions to use. For example, partitions.nifi-01=0, 3, 6, 9, 
> partitions.nifi-02=1,
> 4, 7, 10, and partitions.nifi-03=2, 5, 8, 11. The hostname that is used
> can be the fully qualified hostname, the "simple" hostname, or the IP
> address. There must be an entry for each node in the cluster, or the
> Processor will become invalid. If it is desirable for a node to not have
> any partitions assigned to it, a Property may be added for the hostname
> with an empty string as the value.
>
> NiFi cannot readily validate that all Partitions have been assigned before
> the Processor is scheduled to run. However, it can validate that no
> partitions have been skipped. As such, if partitions 0, 1, and 3 are
> assigned but not partition 2, the Processor will not be valid. However, if
> partitions 0, 1, and 2 are assigned, the Processor will become valid, even
> if there are 4 partitions on the Topic. When the Processor is started, the
> Processor will immediately start to fail, logging errors, and avoid pulling
> any data until the Processor is updated to account for all partitions. Once
> running, if the number of partitions is changed, the Processor will
> continue to run but not pull data from the newly added partitions. Once
> stopped, it will begin to error until all partitions have been assigned.
> Additionally, if partitions that are assigned do not exist (e.g.,
> partitions 0, 1, 2, 3, 4, 5, 6, and 7 are assigned, but the Topic has only
> 4 partitions), then the Processor will begin to log errors on startup and
> will not pull data.
>
> In order to use a static mapping of Kafka partitions, the "Topic Name
> Format" must be set to "names" rather than "pattern." Additionally, all
> Topics that are to be consumed must have the same number of partitions. If
> multiple Topics are to be consumed and have a different number of
> partitions, multiple Processors must be used so that each Processor
> consumes only from Topics with the same number of partitions.
>
> On Dec 13, 2023 at 8:59 AM -0500, edi mari , wrote:
>
> Hi Pierre,
> Yes, We tried to use FIFO prioritize in the queue, but it didn't help.
> Some records in the target topic are ordered differently fro

Configure and Access Keycloak

[Tito Mari Francis Escaño]

Hi everyone,
Recently exploring how to configure and administer Keycloak, can somebody
please point me to the resources for doing this in OpenBSD 7.4?
There seems to be no man pages for this purpose.
Would greatly appreciate all the help to make this work.
Thank you very much.

Re: OpenBSD on M1 Mac using VMware Fusion 13

[Tito Mari Francis Escaño]

On Sun, Nov 26, 2023 at 5:22 PM Janne Johansson  wrote:

> Den sön 26 nov. 2023 kl 09:03 skrev Tito Mari Francis Escaño
> :
> >
> > Hi misc,
> > I want to run OpenBSD on company issued M1 Mac through VMware Fusion 13,
> > for experiments and development.
> > I tried to use the ARM64 image but it does not seem to work, it's my
> first
> > time to use non-X86 machine.
>
> This part needs far more attention from your side, you can't just
> leave it at "doesn't work". Computers, emulators, operating systems
> can Not-Work in literally millions of ways.
>
> What hardware did VMWare emulate, what were the errors, at which point
> did it stop?


I was hoping that it would run X86 or AMD64 binary but it didn't.
On the ARM64 side, I was expecting an ISO that I can run thru VMware Fusion
since it only accepts and runs ARM64 binaries.
Admittedly, this is a new territory for me as I saiid and was asking if
anybody went thru this route before.

>
>
> > Has anyone here been able to run OpenBSD on M1 Mac through VMware Fusion
> > before?
> > Much as I want to run it on the hardware, since this a company-issued
> > laptop, I opted to use VMware instead.
> > Hope somebody can point me in the right direction on this one.
>
> Both UTM and qemu can run openbsd-aarch64 guests, even if you can't
> get VMWare to work.


Will explore QEMU, thanks for the alternative.

>
>
> https://nomnp.com/plaintext/utmopenbsd
> or a little longer,
>
> https://codeofconnor.com/running-an-arm64-openbsd-virtual-machine-on-apple-silicon-with-qemu/
> might help you get an openbsd VM running on your M1 Mac.
>
> --
> May the most significant bit of your life be positive.
>

OpenBSD on M1 Mac using VMware Fusion 13

[Tito Mari Francis Escaño]

Hi misc,
I want to run OpenBSD on company issued M1 Mac through VMware Fusion 13,
for experiments and development.
I tried to use the ARM64 image but it does not seem to work, it's my first
time to use non-X86 machine.
Has anyone here been able to run OpenBSD on M1 Mac through VMware Fusion
before?
Much as I want to run it on the hardware, since this a company-issued
laptop, I opted to use VMware instead.
Hope somebody can point me in the right direction on this one.
Thank you.

Printing Via Wifi

[Tito Mari Francis Escaño]

Hi everyone,
Can somebody please point me to the proper resources on printing through
wifi?
I will have an Epson L3250 and wants to print from my OpenBSD 7.3
laptop. This printer should work nicely with my office-issued Mac, and
wants to use it with my personal laptop running OpenBSD.
Advise would be greatly appreciated.
Thank you.

httpd and libmodsecurity

[Tito Mari Francis Escaño]

Hi,
Can somebody point me to resources on how to use libmodsecurity with httpd
to create a WAF for a web application?
If it's not feasible, please advise what options are there for WAF that can
be used with the built-in httpd.
Thank you.

GNUstep Testsuite

[Tito Mari Francis Escaño]

Hi,
Can somebody please point me to the GNUstep Testsuite resources?
I clicked the link in
https://gnustep.github.io/developers/documentation.html and it went error
404, supposedly pointing to something in Github but it seems it's no longer
there.
I was hoping to learn how test-driven development is done in GNUstep and
Objective-C.
Please advise.
Thank you.

OpenBSD on Thinkpad X13s

[Tito Mari Francis Escaño]

Hi everyone,
Has anyone tried to install and run OpenBSD on ARM-based Thinkpad X13s?
What are the challenges on making OpenBSD run on it?
Thank you.

OpenBSD on Thinkpad X13s ARM-based laptop

[Tito Mari Francis Escaño]

Hi everyone,
Has anyone tried to install and run OpenBSD on ARM-based Thinkpad X13s?
What are the challenges on making OpenBSD run on it?
Thank you.

[Pharo-users] Re: headless mode

[Jesus Mari Aguirre]

pharo --nodisplay works for me (pharo 9 on ubuntu)

On Tue, Apr 11, 2023 at 5:23 PM Christophe Touzé 
wrote:

> Bonjour,
>
> Quelqu'un pourrait-il me dire svp comment lancer une image Pharo 10 en
> mode headless (sous Ubuntu) ?
> J'ai essayé "pharo --headless monImage.image" sans succès.
> Précision, j'ai Seaside dans mon image.
> Merci d'avance !
>
>
> Hello,
>
> Could somebody tell me how to launch a Pharo 10 image in headless mode,
> under Ubuntu ?
> I have tried "pharo --headless myImage.image", without success.
> I have the Seaside package in my image, I don't know if it matters.
> Thanks !
>
>

[Efeu] Naturnaher Arbeitsplatz - Stelle frei auf Abenteuerspielplatz in Berlin

[Lea Mari Randolf]

Liebe alle,

es wird eine*n Nachfolger*in für meine Stelle auf dem Moabiter Kinderhof 
in Berlin gesucht. Der Bau- und Abenteuerspielplatz sucht ein*e 
Sozialarbeiter*in/Sozialpädagog*in mit staatlicher Anerkennung. 
Vielleicht fühlt ihr euch da ja angesprochen oder kennt Jobsuchende :) 
Es ist auf jeden Fall ein Arbeitsplatz mit viel Zeit an der frischen 
Luft, sowie Erlebnis- und Umweltpädagogischen Anteilen. Bezahlt wird 
nach TV-L S.


Ich schicke euch hier mal die Stellenanzeige, Bewerbungen oder 
Nachfragen gerne direkt an moabiter.kinder...@berlin.de


https://www.stellenmarkt-sozial.de/Detailed/128807.html

Beste Grüße aus Berlin,
Lea

Re: CIAM recommendation

[Tito Mari Francis Escaño]

Thanks for the response Tobias. Hope you can share with me your references
on setting up a CIAM running on OpenBSD.
I ran into FusionAuth and liked what I saw on client self-service
registration and web-based user identity management; though they are
Java-based, it seems that their disappointing definition of open source is
that it runs on Linux.
Thanks.


On Sun, Jul 24, 2022 at 8:39 PM Tobias Fiebig <
tob...@reads-this-mailinglist.com> wrote:

> Heho,
> I think getting the basis going is not too hard; There is LDAP and iirc
> also krb5 in base (if not, it is in ports), and you can always shoot for AD
> with smb4.
>
> The bigger problem, though, is most likely getting a proper 'web-ish' SSO
> provider for sth. like SAML or OpenID going. IIRC there are some PHP
> implementations running against an LDAP fine; But the question then is
> whether OpenBSD provides that much benefit if SSO goes through some random
> PHP app with a questionable update record.
>
> For the more common SAML/OpenID providers, you probably run into the issue
> that most of these apps are either a) build to be funny appliances, or b)
> build to run in _some_ form of docker-ish environment (or, as I call it:
> The enterprise problem)...
>
> I am planning to $somewhen setup something similar with OpenBSD and will
> be happy to share docs (if I get around to it); But that will most likely
> also be 'not safe for production' anyway...
>
> With best regards,
> Tobias
>
>
>
>
> -Original Message-
> From: owner-m...@openbsd.org  On Behalf Of Tito
> Mari Francis Escaño
> Sent: Sunday, 24 July 2022 07:11
> To: misc@openbsd.org
> Subject: CIAM recommendation
>
> Hi everyone,
> Can you please recommend package(s) I can setup on OpenBSD to create a
> CIAM or customer identity and access management system? This is to provide
> SSO between enterprise applications. While it's easy to go for Linux
> option, I prefer to build on top of the security offered by OpenBSD from
> the ground up.
> Would appreciate your pointers on this.
> Thank you.
>
>

CIAM recommendation

[Tito Mari Francis Escaño]

Hi everyone,
Can you please recommend package(s) I can setup on OpenBSD to create a CIAM
or customer identity and access management system? This is to provide SSO
between enterprise applications. While it's easy to go for Linux option, I
prefer to build on top of the security offered by OpenBSD from the ground
up.
Would appreciate your pointers on this.
Thank you.

[Pharo-users] mongodb and voyage

[Jesus Mari Aguirre]

Hello everyone! question about Mongodb and voyage...
Is there any way to build a query selecting only the fields of interest
just like someone asks in this question?
https://stackoverflow.com/questions/43801636/specify-fields-to-return-in-voyagemongo

The answer is out of date but I think this should be supported because it
is totally necessary.
If it is not supported, Is this feature in your roadmap?
Thanks!

Re: [Swlfest] A Database of LPFM Stations (RadioWorld)

[Mari Zalupski]



> On 05/07/2022 12:13 AM Fred Zalupski  wrote:
> 
> 
> 
> https://www.radioworld.com/news-and-business/news-makers/a-look-at-the-strange-unique-and-compelling-world-of-lpfms
> 
> This fellow's interest in LPFM is tied to his interest in pirate 
> broadcasting. None of us are surprised.
> 
> Of course, one is reminded of David Goren's pirate cataloging project. 
> Fascinating stuff.
> 
> 
> /Fred
> ___
> Swlfest mailing list
> Swlfest@hard-core-dx.com
> http://montreal.kotalampi.com/mailman/listinfo/swlfest
> 
> To unsubscribe: Send an E-mail to 
> swlfest-requ...@hard-core-dx.com?subject=unsubscribe, or visit the URL shown 
> above.
> 
> For more information on the Fest, visit:
> 
> http://www.swlfest.com
> http://swlfest.blogspot.com
> 
___
Swlfest mailing list
Swlfest@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/swlfest

To unsubscribe:  Send an E-mail to  
swlfest-requ...@hard-core-dx.com?subject=unsubscribe, or visit the URL shown 
above.

For more information on the Fest, visit:

http://www.swlfest.com
http://swlfest.blogspot.com

Data in reports Geo Performance Report do not match to Campaign Performance Report and other reports

[Mari Mizuki]

For half of the accounts we are managing, the data obtained through the API 
in reports Geo Performance Report does NOT match to other reports data. We 
started to use API v9 this month. There was no issue with the previous 
version API.

-- 
-- 
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog:
https://googleadsdeveloper.blogspot.com/
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~

You received this message because you are subscribed to the Google
Groups "AdWords API and Google Ads API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"Google Ads API and AdWords API Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to adwords-api+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/adwords-api/33da41cf-7dcf-4cf4-987d-6c25ff841e65n%40googlegroups.com.

Re: yacc.h

[Tito Mari Francis Escaño]

Thanks for the response Omar.
The tarball can be downloaded from
https://sourceforge.net/projects/objc/files/src/objc-3.3.25.tar.gz
The error is illustrated below:
[image: portable obj compiler error.png]
I already installed Bison hoping it will provide yacc.h, but it didn't also
include that file.
I also tried using the y.tab.h file but it had the same error.
I tried to comment out the yacc.h header, still got the same error message.

On Tue, Apr 19, 2022 at 1:44 AM Omar Polo  wrote:

> Tito Mari Francis Escaño  wrote:
> > Hi everyone,
> > I'm trying to build Portable Object Compiler from
> > https://sourceforge.net/projects/objc/ in OpenBSD snapshot but it keeps
> > complaining that it can't find yacc.h so it won't push through.
>
> It's always a good idea to share a tarball, especially when asking for
> help.  It makes your situation "reproducible" (sorta) so it's easier for
> someone else to help you debug the issue.  It's also incredibly useful
> to also copy/paste the *exect* output from your command, including the
> errors.
>
> > I have the build tools installed during initial installation, so I was
> > wondering where the problem is.
> > Is there such a thing as yacc.h in any package or ports?
>
> When in doubt you can use pkglocate to look for files owned by packages,
> even if you don't have them installed.  It's an incredibly useful tool.
> However, in this case I doubt it'll help you.
>
> yacc is included in base and given that's a parser generator I don't
> find strange to have it as requirement for a compiler.  Yacc usually
> generates a file called `y.tab.c' and, if -d is provided, it generates
> y.tab.h too.  Bison (a GNU implementation of yacc) does the same but
> instead of the "y" uses the name of the yacc file as base for the output
> IIRC.
>
> Maybe playing with the -d, -b and/or -o flags helps?  what if you
> "force" it to use GNU bison?
>
> > Please let me know.
> > Thanks.
>
>
>

yacc.h

[Tito Mari Francis Escaño]

Hi everyone,
I'm trying to build Portable Object Compiler from
https://sourceforge.net/projects/objc/ in OpenBSD snapshot but it keeps
complaining that it can't find yacc.h so it won't push through.
I have the build tools installed during initial installation, so I was
wondering where the problem is.
Is there such a thing as yacc.h in any package or ports?
Please let me know.
Thanks.

Re: Portable Object Compiler port

[Tito Mari Francis Escaño]

Thanks for the other site to look for ports. I didn't find any link
corresponding to the package I was looking for and plan to work on.
I guess it means I can start working on a port for it, making some progress
and having some showstopper, communicating with the author.
Thanks again.

On Mon, Apr 18, 2022 at 4:12 AM Stuart Henderson 
wrote:

> On 2022/04/18 01:10, Tito Mari Francis Escaño wrote:
> > Hi everyone,
> > Is there anyone here working on the port of the Portable Object Compiler?
> > The URL is https://sourceforge.net/projects/objc/ and I didn't find any
>
> I haven't seen anyone mention working on it.
>
> > existing port of it in hXXps://openports.se
>
> (url munged in a probably vain attempt to avoid searchings giving it
> more link score)
>
> that openports .se site has poor quality data extraction and misses
> some things.
>
> Suggest you use https://openports.pl, your own installed copy of
> ports-readmes-dancer, or even just grepping the ports tree or
> searching the ports repo in github.
>

Portable Object Compiler port

[Tito Mari Francis Escaño]

Hi everyone,
Is there anyone here working on the port of the Portable Object Compiler?
The URL is https://sourceforge.net/projects/objc/ and I didn't find any
existing port of it in https://openports.se
Please let me know.
Thanks.

support update

[Tito Mari Francis Escaño]

0
C Philippines
P National Capital Region
T Taguig City
Z 1633
O EDGEKIT Solutions
I Tito Mari Francis H. Escano
A Central Bicutan Taguig City 1633 Philippines
M edgekit.soluti...@gmail.com 
U https://edgekitsolutions.blogspot.com
<https://edgekitcomputersystems.blogspot.com/>
B +63 927 258 7188
X n/a
N We specialize in building simple, secure and functional solutions built
on our
Weapon of Choice technology stack, founded on OpenBSD and PostgreSQL. We
provide OpenBSD and PostgreSQL consulting, implementation and
administration.

[Pharo-users] Re: [ANN] Pharo 10 released!

[Jesus Mari Aguirre]

Bravo! Many thanks for your effort! It seems like yesterday when I started
learning Smalltalk on Pharo 1.2...fun is growing version by version! but
please slow down a bit dude ;-) just to have time to update my "things"

On Tue, Apr 5, 2022 at 12:41 PM Esteban Lorenzano  wrote:

> Dear Pharo users and dynamic language lovers:
>
> We have released Pharo version 10  !
>
> Pharo is a pure object-oriented programming language and a powerful
> environment, focused on simplicity and immediate feedback.
>
>
> Pharo 10 was a short iteration where we focused mainly on stability and
> enhancement of the environment :
>
>
>- Massive system cleanup
>-
>   - gained speed
>   - removed dead code
>   - removed old/deprecated frameworks (Glamour, GTTools, Spec1)
>   - All Remaining tools written using the deprecated frameworks have
>been rewritten: Dependency Analyser, Critique Browser, and many other small
>utilities.
>- Modularisation has made a leap, creating correct baselines (project
>descriptions) for many internal systems, making possible the work and
>deployment of minimal images.
>- Removing support for the old Bytecode sets and embedded blocks
>simplified the compiler and language core.
>- As a result, our image size has been reduced by 10% (from 66MB to
>58MB)
>- The VM has also improved in several areas: better async I/O support,
>socket handling, FFI ABI,
>
> Even being a short iteration, we have closed a massive amount of issues:
> around 600 issues and 700 pull requests. A more extended changelog can be
> found at
> https://github.com/pharo-project/pharo-changelogs/blob/master/Pharo100ChangeLogs.md
> .
>
> While the technical improvements are significant, still the most
> impressive fact is that the new code that got in the main Pharo 10 image
> was contributed by more than 80 people.
>
> Pharo is more than code. It is an exciting project involving a great
> community.
>
> We thank all the contributors to this release:
>
> Aaron Bieber, Ackerley Tng, Alban Benmouffek, Alejandra Cossio, Aless
> Hosry, Alexandre Bergel, Aliaksei Syrel, Alistair Grant, Arturo Zambrano,
> Asbathou Biyalou-Sama, Axel Marlard, Bastien Degardins, Ben Coman, Bernardo
> Contreras, Bernhard Pieber, Carlo Teixeira, Carlos Lopez, Carolina
> Hernandez, Christophe Demarey, Clotilde Toullec, Connor Skennerton, Cyril
> Ferlicot, Dave Mason, David Wickes, Denis Kudriashov, Eric Gade, Erik Stel,
> Esteban Lorenzano, Evelyn Cusi Lopez, Ezequiel R. Aguerre, Gabriel Omar
> Cotelli, Geraldine Galindo, Giovanni Corriga, Guille Polito, Himanshu, Jan
> Bliznicenko, Jaromir Matas, Kasper Østerbye, Kausthub Thekke Madathil,
> Konrad Hinsen, Kurt Kilpela, Luz Paz, Marco Rimoldi, Marcus Denker, Martín
> Dias, Massimo Nocentini, Max Leske, Maximilian-ignacio Willembrinck
> Santander, Miguel Campero, Milton Mamani Torres, Nahuel Palumbo, Norbert
> Hartl, Norm Green, Nour Djihan, Noury Bouraqadi, Oleksandr Zaitsev, Pablo
> Sánchez Rodríguez, Pablo Tesone, Pavel Krivanek, Pierre Misse-Chanabier,
> Quentin Ducasse, Raffaello Giulietti, Rakshit, Renaud de Villemeur, Rob
> Sayers, Roland Bernard, Ronie Salgado, Santiago Bragagnolo, Sean DeNigris,
> Sebastian Jordan Montt, Soufyane Labsari, Stephan Eggermont, Steven
> Costiou, Stéphane Ducasse, Sven Van Caekenberghe, Theo Rogliano, Thomas
> Dupriez, Théo Lanord, Torsten Bergmann, Vincent Blondeau.
>
>
> (If you contributed to Pharo 10 development in any way and we missed your
> name, please send us an email and we will add you).
>
> Enjoy!
>
> The Pharo Team
>
> Discover Pharo: https://pharo.org/features
>
> Try Pharo: http://pharo.org/download 
>
> Learn Pharo: http://pharo.org/documentation
> 
>

[Pharo-users] Re: Installing code in a running image

[Jesus Mari Aguirre]

What about using https://github.com/pharo-ide/TelePharo (by MarcusDenker
) I've
never used but looks like it could fit your needs.
Anyway if your client can afford 1 minute out of the business you can stop
the image and load a Git repo, save and restart.

On Fri, Apr 1, 2022 at 6:36 PM Davide Varvello via Pharo-users <
pharo-users@lists.pharo.org> wrote:

> Hi Folks!
>
> For a customer of mine I want to download a bunch of new code from my
> webserver and installing it in a running Pharo image, is there a feasible
> way to do it?
>
> Thanks
> Davide
>

Github/Bitbucket free alternative

[Tito Mari Francis Escaño]

Hi everyone,
I'm trying to develop web apps on OpenBSD but Github and even Bitbucket
seems to think that only Windows and/or Linux are the platforms so I feel
forced to use VS Code that runs only on those systems.
Can somebody please point me to alternative free online code repository
services that I can use with OpenBSD?
Thanks and stay safe everyone :)

[jira] [Assigned] (OAK-6829) ExternalPrivateStoreIT/ExternalSharedStoreIT.testSyncBigBlob failures

[Francesco Mari (Jira)]

 [ 
https://issues.apache.org/jira/browse/OAK-6829?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
 ]

Francesco Mari reassigned OAK-6829:
---

Assignee: (was: Francesco Mari)

> ExternalPrivateStoreIT/ExternalSharedStoreIT.testSyncBigBlob failures
> -
>
> Key: OAK-6829
> URL: https://issues.apache.org/jira/browse/OAK-6829
> Project: Jackrabbit Oak
>  Issue Type: Bug
>  Components: segment-tar
>Affects Versions: 1.7.9
>Reporter: Julian Reschke
>Priority: Major
> Fix For: 1.7.11, 1.8.0
>
> Attachments: 
> TEST-org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT.xml, 
> TEST-org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT.xml, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt, 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT-output.txt
>
>
> {noformat}
> testSyncBigBlob(org.apache.jackrabbit.oak.segment.standby.ExternalPrivateStoreIT)
>   Time elapsed: 27.921 sec  <<< FAILURE!
> java.lang.AssertionError: expected:<{ root = { ... } }> but was:<{ root : { } 
> }>
> Running org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT
> Tests run: 11, Failures: 1, Errors: 0, Skipped: 0, Time elapsed: 93.353 sec 
> <<< FAILURE! - in 
> org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT
> testSyncBigBlob(org.apache.jackrabbit.oak.segment.standby.ExternalSharedStoreIT)
>   Time elapsed: 30.772 sec  <<< FAILURE!
> java.lang.AssertionError: expected:<{ root = { ... } }> but was:<{ root : { } 
> }>
> {noformat}



--
This message was sent by Atlassian Jira
(v8.20.1#820001)

[kwin] [Bug 430659] external monitor flickering

[Luca Mari]

https://bugs.kde.org/show_bug.cgi?id=430659

Luca Mari  changed:

   What|Removed |Added

   Platform|Kubuntu Packages|Manjaro
 Resolution|WAITINGFORINFO  |WORKSFORME
Version|5.19.5  |5.24.2
 Status|NEEDSINFO   |RESOLVED

--- Comment #4 from Luca Mari  ---
Thank you very much for the question (and the work you have been doing to
improve KDE!).

In the meantime I have upgraded my working environment to:
Operating System: Manjaro Linux
KDE Plasma Version: 5.24.2
KDE Frameworks Version: 5.91.0
Qt Version: 5.15.2
Kernel Version: 5.16.11-2-MANJARO (64-bit)
Graphics Platform: X11
Processors: 4 × Intel® Core™ i7-5500U CPU @ 2.40GHz
Memory: 15,5 GiB of RAM
Graphics Processor: Mesa Intel® HD Graphics 5500

I confirm that the problem does NOT occur anymore in this configuration.

-- 
You are receiving this mail because:
You are watching all bug changes.

[go-nuts] Re: Environment setup for developing golang/go

[Francesco Mari]

Thanks for sharing this! Picking up on that configuration, I found this 
piece of documentation about gopls [1]. I followed these steps:

   - Check out github.com/golang/go to /Users/frm/src/go.
   - Build the language distribution as described here [2].
   - Create a new VSCode workspace at /Users/frm/src/go.code-workspace 
   (shown below).
   - Add the necessary directories and configuration to the workspace.
   - Restart the language server.
   - Reinstall/Update all the tools.

This is the workspace configuration. I wanted to use the minimum amount of 
configuration, so I could understand what the right options really are.

{
"folders": [
{
"path": "go/src/cmd"
},
{
"path": "go/test"
},
{
"path": "go/src"
}
],
"settings": {
"go.goroot": "/Users/frm/src/go"
}
}

After following the steps above, I managed to have navigation and code 
completion in my editor.

[1]: 
https://github.com/golang/tools/blob/master/gopls/doc/advanced.md#working-on-the-go-source-distribution
[2]: https://go.dev/doc/install/source

On Friday, 25 February 2022 at 01:45:15 UTC+1 Zik Aeroh wrote:

> The way I do it in VS Code is to do something like this from the repo root:
>
> # Get the dev version of Go into PATH for the editor and local dev work
> $ export PATH=$PWD/bin:$PATH
> # Build a baseline version of go and save it to restore if things break, 
> or for comparison
> $ (cd src; GOGC=off ./make.bash) && toolstash save
> # Launch VS Code with the relevant module roots, with PATH set
> $ code ../go.code-workspace
>
> Where go.code-workspace is in the folder above my checkout (as it's not in 
> .gitignore):
>
> {
> "folders": [
> {
> "path": "go/src"
> },
> {
> "path": "go/src/cmd"
> },
> {
> "path": "go/test"
> }
> ],
> "settings": {
> "editor.codeActionsOnSave": {"source.fixAll": false},
> "go.lintOnSave": "off",
> "go.lintTool": "staticcheck",
> "gopls": {
> // "ui.semanticTokens": true,
> "ui.diagnostic.analyses": {
> "unsafeptr": false,
> "simplifycompositelit": false,
> },
> "ui.diagnostic.staticcheck": false,
> },
> "go.languageServerFlags": [
> "-remote=auto;godev",
> ],
> }
> }
>
> Which defines explicitly marks those roots for gopls, and sets a couple of 
> settings that make editing the toolchain a little less annoying (thanks to 
> the extra diagnostics and fixes and such).
>
> It's entirely possible that there's an easier way to do this, or that it's 
> already moot thanks to experimental multi-module stuff / workfile stuff. 
> That'd be nice to know (so I can remove all of this), but for now this is 
> what I do and I'm relatively content
> On Thursday, February 24, 2022 at 4:20:17 PM UTC-8 mari.fr...@gmail.com 
> wrote:
>
>> Hi all,
>>
>> I wanted to dig deeper into Go and start exploring the toolchain and the 
>> standard library. I cloned github.com/golang/go and noticed that the 
>> src/cmd directory contains a go.mod. I opened my editor (Visual Studio Code 
>> + Go plugin) in the src/cmd directory. I expected to be able to navigate 
>> the code like I normally do, but something about that project makes my 
>> editor unhappy.
>>
>> I assume that there are people here that already have their favourite 
>> editor/IDE set up to contribute to the language itself. Can you please 
>> share your setup? Are there any tips and tricks you can share to have code 
>> navigation and autocompletion working in golang/go?
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"golang-nuts" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to golang-nuts+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/golang-nuts/feff5d92-1428-48d9-90de-b1a3ecc8893en%40googlegroups.com.

[go-nuts] Environment setup for developing golang/go

[Francesco Mari]

Hi all,

I wanted to dig deeper into Go and start exploring the toolchain and the 
standard library. I cloned github.com/golang/go and noticed that the 
src/cmd directory contains a go.mod. I opened my editor (Visual Studio Code 
+ Go plugin) in the src/cmd directory. I expected to be able to navigate 
the code like I normally do, but something about that project makes my 
editor unhappy.

I assume that there are people here that already have their favourite 
editor/IDE set up to contribute to the language itself. Can you please 
share your setup? Are there any tips and tricks you can share to have code 
navigation and autocompletion working in golang/go?

-- 
You received this message because you are subscribed to the Google Groups 
"golang-nuts" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to golang-nuts+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/golang-nuts/810bf5d7-9fe8-4d7d-b3ce-ac27361fd640n%40googlegroups.com.

support update

[Tito Mari Francis Escaño]

0
C Philippines
P National Capital Region
T Taguig City
Z 1633
O EDGEKIT Computer Systems
I Tito Mari Francis H. Escano
A Block 1 Lot 24 Upper Bicutan Taguig City 1633 Philippines
M edgekit.computer.syst...@gmail.com
U https://edgekitcomputersystems.blogspot.com # with trailing slash unless
a specific resource
B +63 927 258 7188
X n/a
N We specialize in building simple, secure and functional solutions built
on our
Weapon of Choice technology stack, founded on OpenBSD and PostgreSQL. We
provide OpenBSD and PostgreSQL consulting, implementation and
administration.

Re: Clang/LLVM migration roadmap

[Tito Mari Francis Escaño]

Hi everyone,
I think the GNUstep project will have to be pragmatic based on the project
goals, and the goals we also have to re-evaluate:
1) Is GNUstep as a project required to be and should  functionally be tied
closely with the GCC toolchain?
2) Is GNUstep required to use GCC toolchain to qualify as an FSF sponsored
project? This I think is more political than technical in any angle.
3) Is GNUstep valuing technical and functional compability with OpenStep
and Cocoa over whatever toolchain to use to maintain that compatibility?
4) Clang/LLVM was initiated by Apple, if I recall correctly, precisely
because GCC support for Objective-C is not at par with C and C++ support,
will the GCC maintainers be compelled to improve Objective-C support if we
stay or we move out?
If we can unanimously answer these questions, I think we can and will move
the project forward.
My two cents is that GNUstep project should use whatever tools and
platforms that move it's goals and objectives forward.
Thanks.


On Mon, Feb 7, 2022 at 4:31 AM Daniel Boyd  wrote:

> I think the decision needs to tie back to the core mission of the project.
> I’m not 100% sure what that is. Is it “Grow the GNUStep user base?” Or is
> it “Maintain a fully copy-left tool chain?” Or some combination?
>
> Honesty, either way, I think llvm/clang is the right choice right now. The
> project has neither the resources nor the capacity to influence gcc’s ObjC
> support. In my view, if you want to influence gcc, the best way would be to
> have 10 times more GNUStep users asking them for better ObjC support. In
> other words, leverage llvm/clang to grow the user base and then use that to
> get more clout with the gcc project.
>
> If you’re looking to recruit more GNUStep users, I just don’t think you
> can do that without ARC, @[], @{}, etc. There are plenty of ObjC developers
> out there right now who are potential future GNUSteppers. And as you
> recruit people, I think “you have to use ObjC instead of Swift” is a much
> easier pitch than “you have to do manual memory management and type out
> objectAtIndex: every time you want to get an object from an array”
>
> Just my two cents.
>
> Sent from my iPhone
>
> On Feb 6, 2022, at 2:02 PM, Gregory Casamento 
> wrote:
>
> 
>
>
> Fred,
>
> On Sun, Feb 6, 2022 at 2:09 PM Fred Kiefer  wrote:
>
>>
>>
>> > Am 06.02.2022 um 01:14 schrieb Gregory Casamento <
>> greg.casame...@gmail.com>:
>> >
>> > There are a number of factors that are driving this:
>> > --
>> > 1) GCC lacks support for many memory management features that are
>> commonly used today
>> > 2) GCC's objective-c support is lagging behind and doesn't include
>> support for @[], @{}, @autorelease, etc etc etc
>> > 3) Lack of bug fixes in GCC's implementation of ObjC
>> > 4) GCC team does not consider ObjC release critical and will and HAS
>> released with broken support for building ObjC targets.
>> > All of these things are UNACCEPTABLE
>>
>> Again I beg to differ. Of course the first two point are true and need to
>> be addressed. But I am not aware of any critical bug in gcc that is
>> currently hindering us. There are many missing features and this is really
>> bad for GNUstep and ObjC as a whole. As for the position of the gcc team on
>> ObjC, none of knows and we only may guess here. The one time where a gcc
>> release knowingly broke ObjC was ages ago. Maybe it could happen again, we
>> just don’t know. Stating something as a fact that is just a possibility is
>> a rather annoying habit of our times. Please don’t do so on the GNUstep
>> mailing list.
>>
>
> I am not sure the last time I saw a significant bug fix in the objc code
> in GCC.
>
> As is typing words in all capital letters. It really doesn’t help in
>> polite conversations.
>
>
> Fred
>
>
> GC
> --
> Gregory Casamento
> GNUstep Lead Developer / OLC, Principal Consultant
> http://www.gnustep.org - http://heronsperch.blogspot.com
> https://www.patreon.com/bePatron?u=352392 - Become a Patron
> https://gf.me/u/x8m3sx - My GNUstep GoFundMe
> https://teespring.com/stores/gnustep - Store
>
>

Test Driven Development in GNUstep

[Tito Mari Francis Escaño]

Hi everyone,
Looking for test driven development tools for Objective-C, I ran into
OCUnit  and OCMock <
https://ocmock.org/>, are these commendable tools to use with GNUstep?
What are the recommended alternative if these are not viable?
Please provide pointers on specific versions we should work with since it
seems the most recent versions are iOS-specific and if there are things we
should watch out for when using these tools with GNUstep.
Thanks so much.

[MARMAM] US Marine Mammal/Protected Species Observer Positions with Smultea Sciences - HIRING NOW!

[Mari Smultea]

Smultea Sciences (www.smulteasciences.com) has immediate and fall-winter
2021 job openings for Protected Species Observers (PSOs) and PAM Operators
(Passive Acoustic Monitoring) to observe for marine mammals and sea turtles
from vessels in US waters.  Job description and requirement details can be
found at https://www.smulteasciences.com/pso-pam-hiring.


*You MUST have a US Passport to apply.*

*TO APPLY:* (You must be a US citizen with a US Passport)

   1.

   Read the job description and qualification requirements in the link
   above.
   2.

   Complete our hiring questionnaire
    from that
   link.
   3.

   I*f you answered YES to all the questions*, please submit your CV and a
   letter letting us know who you are and what you're about to
   psoj...@smulteasciences.com
___
MARMAM mailing list
MARMAM@lists.uvic.ca
https://lists.uvic.ca/mailman/listinfo/marmam

Re: [plug] Share partition to two local users

[Tito Mari Francis Escaño]

You can mount the /dev/sda1 to a subdirectory, say /home/commonspace, then:

chmod 777

This will enable both of you to access it. There are other means to secure
access to this storage device.

On Wed, Sep 15, 2021 at 1:33 PM samakv  wrote:

>
> Hello PLUG,
>
>
> Good day.
>
> I have some extra storage that I would like to share between two local
> user accounts.
>
> User 1 is me and user 2 is wife, share one dedicated partition say
> /dev/sda1.
>
> We are operating a small business together so while I'm working on my
> day job, the wife can continue where I left off and vice versa.
>
> How to do it?
>
> Samuel
>
> PS We will get two separate computers in the future but for now, we have
> to make do with one PC. :-)
>
> _
> Philippine Linux Users' Group (PLUG) Mailing List
> http://lists.linux.org.ph/mailman/listinfo/plug
> Searchable Archives: http://archives.free.net.ph
>
_
Philippine Linux Users' Group (PLUG) Mailing List
http://lists.linux.org.ph/mailman/listinfo/plug
Searchable Archives: http://archives.free.net.ph

[Pharo-users] Re: Private Methods

[Jesus Mari Aguirre]

Please keep Pharo simple, why do you need private methods...you can include
then in a protocol named private...other language have it...yes...next
addition will be namespaces...other...I don't know...at last we have Java

El jue., 19 ago. 2021 9:00, Richard O'Keefe  escribió:

> Many years ago there was a proposal in the Squeak mailing list about
> enforcing
> a naming convention, "pvt",  I implemented that in my Smalltalk system.
> The
> compiler enforces the rule that pvt.[A-Z].* message can only be sent to
> (self|super) (basicNew|basicNew: n|new|new: n|pvtNew: n)?
> in a class method or
> (self|super) ((class (new|new: n)|pvtSpeciesNew: n|pvtClone)?
> in an instance method.
> There are currently
> 9412 public selectors
>  793 pvt* selectors and
>23 private* selectors,
> where the last group is methods that I *want* to be private in some sense
> but
> cannot do with this machinery.  (For example, calling a "private" method on
> another object known to be of the same class.)
>
> I think the evidence shows that this works well enough to be useful, even
> if it
> isn't quite as expressive as I'd like.  And what *that* means is that
> this can be
> done with a style check, using the machinery Pharo already has for style
> checks.
>
>
>
> On Wed, 18 Aug 2021 at 08:14, Craig Johnson  wrote:
> >
> > Hi All,
> >
> >
> > Just a newb off-the-wall question.
> >
> > Is there any good reason why we can't create a true private method in a
> > Pharo class by putting that method inside an instance or class variable
> > as a lambda (block).
> >
> >
> > This would reduce one of my biggest bugbears with Pharo, namely the
> > pollution of the global namespace with every single message name in the
> > entire system.
> >
> >
> >
> > Craig
>

[Pharo-users] Re: Is there anyone able to push to Github

[Jesus Mari Aguirre]

Thanks Tomohiro Oda! I have unchecked the option "use custom SSH keys" and
it's working perfectly.
Is it an issue or maybe I missed something? I think the path and the other
fields, ssh userName = "git" and the passphrase were ok...anyway now works


El mié, 28 jul 2021 a las 12:27, Tomohiro Oda ()
escribió:

> I could use iceberg via SSH in both Pharo 8 and Pharo 9 on OSX.
> When I check the "use custom SSH keys", I got the authentication error.
> If I uncheck it, it works fine.
> ---
> tomo
>
> 2021年7月28日(水) 19:10 Jesus Mari Aguirre :
> >
> > I have created the key files in OSX
> >
> > ssh-keygen -t rsa
> >
> > ssh-add -K ~/.ssh/id_rsa
> >
> > Then I've added to my github user, account settings->ssh andCPG keys
> > then I change the url to the ssh url like you show me
> >
> >  git remote set-url jmari g...@github.com:USERNAME/REPOSITORY.git
> >
> > Start pharo image and enable ssh keys in iceberg but now I have an
> "Iceberg authentication error" telling me to add the keys...etc
> >
> >
> >
> > El mié, 28 jul 2021 a las 11:10, Tomohiro Oda (<
> tomohiro.tomo@gmail.com>) escribió:
> >>
> >> I got the same error and I could push by using SSH instead of HTTPS.
> >> To do that, you need to register your SSH public key to github and set
> >> your local repository to point your github repository via ssh.
> >> Key registration can be done on the settings page of your github
> account.
> >> Your local repository can set to use SSH by
> >>
> >> git remote set-url origin g...@github.com:USERNAME/REPOSITORY.git
> >>
> >> I hope this helps you.
> >> ---
> >> tomo
> >>
> >> 2021年7月28日(水) 18:02 Jesus Mari Aguirre :
> >> >
> >> > Are you able to push to github this morning? I'm not able to push in
> any of my pharo images from my laptop but I can push from other
> applications...
> >> > It returns a 403 error, I changes from https to rsa keys(and added my
> public key to the github project) to and same result.
>

[Pharo-users] Re: Is there anyone able to push to Github

[Jesus Mari Aguirre]

Ok, I will try all the steps again later, Thanks Tomohiro!

El mié, 28 jul 2021 a las 12:27, Tomohiro Oda ()
escribió:

> I could use iceberg via SSH in both Pharo 8 and Pharo 9 on OSX.
> When I check the "use custom SSH keys", I got the authentication error.
> If I uncheck it, it works fine.
> ---
> tomo
>
> 2021年7月28日(水) 19:10 Jesus Mari Aguirre :
> >
> > I have created the key files in OSX
> >
> > ssh-keygen -t rsa
> >
> > ssh-add -K ~/.ssh/id_rsa
> >
> > Then I've added to my github user, account settings->ssh andCPG keys
> > then I change the url to the ssh url like you show me
> >
> >  git remote set-url jmari g...@github.com:USERNAME/REPOSITORY.git
> >
> > Start pharo image and enable ssh keys in iceberg but now I have an
> "Iceberg authentication error" telling me to add the keys...etc
> >
> >
> >
> > El mié, 28 jul 2021 a las 11:10, Tomohiro Oda (<
> tomohiro.tomo@gmail.com>) escribió:
> >>
> >> I got the same error and I could push by using SSH instead of HTTPS.
> >> To do that, you need to register your SSH public key to github and set
> >> your local repository to point your github repository via ssh.
> >> Key registration can be done on the settings page of your github
> account.
> >> Your local repository can set to use SSH by
> >>
> >> git remote set-url origin g...@github.com:USERNAME/REPOSITORY.git
> >>
> >> I hope this helps you.
> >> ---
> >> tomo
> >>
> >> 2021年7月28日(水) 18:02 Jesus Mari Aguirre :
> >> >
> >> > Are you able to push to github this morning? I'm not able to push in
> any of my pharo images from my laptop but I can push from other
> applications...
> >> > It returns a 403 error, I changes from https to rsa keys(and added my
> public key to the github project) to and same result.
>

[Pharo-users] Re: Is there anyone able to push to Github

[Jesus Mari Aguirre]

I reset my laptop and after restoring the repo url to the https url I'm
able to push...anyway https is deprecated, in any moment I should change to
ssh but not today...
I don't know why it hasn't worked for me. anyway lot of thanks Tomohiro Oda

El mié, 28 jul 2021 a las 12:10, Jesus Mari Aguirre ()
escribió:

> I have created the key files in OSX
>
> ssh-keygen -t rsa
>
> ssh-add -K ~/.ssh/id_rsa
>
> Then I've added to my github user, account settings->ssh andCPG keys
> then I change the url to the ssh url like you show me
>
>  git remote set-url jmari g...@github.com:USERNAME/REPOSITORY.git
>
> Start pharo image and enable ssh keys in iceberg but now I have an "Iceberg 
> authentication error" telling me to add the keys...etc
>
>
>
> El mié, 28 jul 2021 a las 11:10, Tomohiro Oda (<
> tomohiro.tomo@gmail.com>) escribió:
>
>> I got the same error and I could push by using SSH instead of HTTPS.
>> To do that, you need to register your SSH public key to github and set
>> your local repository to point your github repository via ssh.
>> Key registration can be done on the settings page of your github account.
>> Your local repository can set to use SSH by
>>
>> git remote set-url origin g...@github.com:USERNAME/REPOSITORY.git
>>
>> I hope this helps you.
>> ---
>> tomo
>>
>> 2021年7月28日(水) 18:02 Jesus Mari Aguirre :
>> >
>> > Are you able to push to github this morning? I'm not able to push in
>> any of my pharo images from my laptop but I can push from other
>> applications...
>> > It returns a 403 error, I changes from https to rsa keys(and added my
>> public key to the github project) to and same result.
>>
>

[Pharo-users] Re: Is there anyone able to push to Github

[Jesus Mari Aguirre]

I have created the key files in OSX

ssh-keygen -t rsa

ssh-add -K ~/.ssh/id_rsa

Then I've added to my github user, account settings->ssh andCPG keys
then I change the url to the ssh url like you show me

 git remote set-url jmari g...@github.com:USERNAME/REPOSITORY.git

Start pharo image and enable ssh keys in iceberg but now I have an
"Iceberg authentication error" telling me to add the keys...etc



El mié, 28 jul 2021 a las 11:10, Tomohiro Oda ()
escribió:

> I got the same error and I could push by using SSH instead of HTTPS.
> To do that, you need to register your SSH public key to github and set
> your local repository to point your github repository via ssh.
> Key registration can be done on the settings page of your github account.
> Your local repository can set to use SSH by
>
> git remote set-url origin g...@github.com:USERNAME/REPOSITORY.git
>
> I hope this helps you.
> ---
> tomo
>
> 2021年7月28日(水) 18:02 Jesus Mari Aguirre :
> >
> > Are you able to push to github this morning? I'm not able to push in any
> of my pharo images from my laptop but I can push from other applications...
> > It returns a 403 error, I changes from https to rsa keys(and added my
> public key to the github project) to and same result.
>

[Pharo-users] Re: Zinc exception logging

[Jesus Mari Aguirre]

maybe
ex signalerContext errorReportOn: aStream
can show you more info

El lun, 26 jul 2021 a las 13:56, Esteban Maringolo ()
escribió:

> Hi Sven,
>
> That's what I wanted to know, I made a quick change to it and pushed
> it to the staging server (where I'm having the error), but I forgot to
> simply search for the string, and now I confirm this is returned by
> Seaside's response generator in the exception handler.
>
> I don't know where the 4 comes from, and it only happens in
> production, but replacing it with another exception handler gives me a
> better understanding of what might be going on. It seems there was a
> change in some dependency (seems like Glorp) that's affecting my
> staging server.
>
> Thanks!
>
> Esteban A. Maringolo
>
> On Mon, Jul 26, 2021 at 3:16 AM Sven Van Caekenberghe 
> wrote:
> >
> > Hi Esteban,
> >
> > > On 26 Jul 2021, at 02:47, Esteban Maringolo 
> wrote:
> > >
> > > Is there a way to have a "stack dump" response in Zinc?
> > >
> > > #debugMode is good for development, but I'm having an "Internal Error:
> > > 4", that I don't know how to trace.
> > >
> > > *   Trying 167.71.182.110...
> > > * TCP_NODELAY set
> > > * Connected to fore.base.golf (167.71.182.110) port 8090 (#0)
> > >> GET /web HTTP/1.1
> > >> Host: x.y.z:8090
> > >> User-Agent: curl/7.58.0
> > >> Accept: */*
> > >>
> > > < HTTP/1.1 500 Internal Server Error
> > > < Content-Length: 512
> > > < Content-Type: text/plain;charset=utf-8
> > > < Server: Zinc HTTP Components 1.0 (Pharo/8.0)
> > > < Date: Mon, 26 Jul 2021 00:45:39 GMT
> > > <
> > > * Connection #0 to host x.y.z left intact
> > > Internal Error: 4
> > >
> > > Regards!
> > >
> > > Esteban A. Maringolo
> >
> > Searching the source code of my image, I only find 'Internal Error' in
> WAExceptionHandler/WAResponseGenerator, not in Zn code. Furthermore,
> printing 4 there would be weird (as it is the exception message).
> >
> > Is this a plain Zn response or a Seaside response ?
> >
> > I know that Seaside has more logging options.
> >
> > Zn does not have an exception logging mechanism that dumps a stack
> trace, only the debugMode for interactive development. I see you used curl,
> can't you fire the request against your dev image then ?
> >
> > Sven
>

[Pharo-users] Is there anyone able to push to Github

[Jesus Mari Aguirre]

Are you able to push to github this morning? I'm not able to push in any of
my pharo images from my laptop but I can push from other applications...
It returns a 403 error, I changes from https to rsa keys(and added my
public key to the github project) to and same result.

Re: Permit to reprint tshirt artwork

[Tito Mari Francis Escaño]

If no response on the permit to reprint, does silence means yes?
On my part there’s no plan to commercialize this and will produce nothing
more than 10 shirts.
Thanks so much.


On Mon, Jul 26, 2021 at 2:54 PM Marcus MERIGHI  wrote:

> Good morning!
>
> titomarifran...@gmail.com (Tito Mari Francis Escaño), 2021.07.26 (Mon)
> 04:28 (CEST):
> > I really like the tshirt design as illustrated here:
> > https://www.openbsd.org/images/tshirt-23.gif
>
> The most recent similar thread I could find:
>
> https://marc.info/?l=openbsd-misc=155439809001096
>
> Marcus
>
> > I bought this shirt before and I was hoping to buy at least one but as
> per
> > https://www.openbsd.org/tshirts.html this is out of print.
> >
> > Can you please point me to whom I should ask permission to reprint
> > t-shirts with this design?
> >
> > Thanks and regards.
>

Permit to reprint tshirt artwork

[Tito Mari Francis Escaño]

Good day,
I really like the tshirt design as illustrated here:
https://www.openbsd.org/images/tshirt-23.gif

I bought this shirt before and I was hoping to buy at least one but as per
https://www.openbsd.org/tshirts.html this is out of print.

Can you please point me to whom I should ask permission to reprint
t-shirts with this design?

Thanks and regards.

Re: [plug] Any body home?

[Tito Mari Francis Escaño]

Ironically this is best expressed by a song from another free and open
source platform:

https://ftp.openbsd.org/pub/OpenBSD/songs/song47.mp3

Have a great weekend everyone :)


On Sat, Jul 24, 2021 at 2:55 PM Romar Mayer Micabalo 
wrote:

> dun dun dun dun
>
> On Sat, Jul 24, 2021 at 2:49 PM aris santillan 
> wrote:
>
>> Still here
>>
>> On Fri, 23 Jul 2021, 20:51 Michael Padilla,  wrote:
>>
>>> Still here sirs 
>>>
>>> Sent from my iPhone
>>>
>>> > On Jul 22, 2021, at 10:49 AM, Martin Acupanda 
>>> wrote:
>>> >
>>> > 
>>> > Hi fellow PLUGers,
>>> >
>>> > Anybody home? Just wondering.
>>> > _
>>> > Philippine Linux Users' Group (PLUG) Mailing List
>>> > http://lists.linux.org.ph/mailman/listinfo/plug
>>> > Searchable Archives: http://archives.free.net.ph
>>> _
>>> Philippine Linux Users' Group (PLUG) Mailing List
>>> http://lists.linux.org.ph/mailman/listinfo/plug
>>> Searchable Archives: http://archives.free.net.ph
>>
>> _
>> Philippine Linux Users' Group (PLUG) Mailing List
>> http://lists.linux.org.ph/mailman/listinfo/plug
>> Searchable Archives: http://archives.free.net.ph
>
>
>
> --
> *Romar Micabalo (aka 'hardwyrd')*
>
> Regional Coordinator, MozillaPH - Northern Mindanao
> https://mozillians.org/en-US/u/hardwyrd/
>
> Founder, CloudN8v
> https://cloudn8v.bitbucket.io
>
> Fedora FOSS Advocate / Mentor
> http://www.fedoraproject.org/wiki/User:Hardwyrd
>
> Volunteer, PyTsada & ITG-X
> SysAdmin / Consultant / Linux & FOSS Evangelist
> -
> "Penguin, penguin, and more penguin !"
> _
> Philippine Linux Users' Group (PLUG) Mailing List
> http://lists.linux.org.ph/mailman/listinfo/plug
> Searchable Archives: http://archives.free.net.ph
_
Philippine Linux Users' Group (PLUG) Mailing List
http://lists.linux.org.ph/mailman/listinfo/plug
Searchable Archives: http://archives.free.net.ph

Re: [plug] Any body home?

[Tito Mari Francis Escaño]

Still here po :)

On Thu, Jul 22, 2021 at 10:49 AM Martin Acupanda 
wrote:

> Hi fellow PLUGers,
>
> Anybody home? Just wondering.
> _
> Philippine Linux Users' Group (PLUG) Mailing List
> http://lists.linux.org.ph/mailman/listinfo/plug
> Searchable Archives: http://archives.free.net.ph
_
Philippine Linux Users' Group (PLUG) Mailing List
http://lists.linux.org.ph/mailman/listinfo/plug
Searchable Archives: http://archives.free.net.ph

[Bug 1937024] Re: xrdp log created with wrong permissions

[Jose Mari]

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
  But if logs are removed (backup, logrotate, etc.), when restart, xrdp
  creates logs with wrong permissions:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
  
  And xrdp-sesman crashes. When permissions are set, xrdp runs normally.
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
  * test ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
  * remove logs: sudo rm -f /var/log/xrdp*
  * start: sudo systemctl start xrdp
  * test fail: xrdp localhost
  
  Logs attached.
+ tested wich package: xrdp/focal 0.9.12-1 amd64

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xrdp/+bug/1937024/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1937024] Re: xrdp log created with wrong permissions

[Jose Mari]

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
- But if logs and run are removed (backup, logrotate, etc.), when restart,
- xrdp  creates logs with wrong permissions:
+ But if logs are removed (backup, logrotate, etc.), when restart, xrdp
+ creates logs with wrong permissions:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
  
  And xrdp-sesman crashes. When permissions are set, xrdp runs normally.
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
  * test ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
  * remove logs: sudo rm -f /var/log/xrdp*
- * remove run: sudo rm -rf /run/xrdp
  * start: sudo systemctl start xrdp
  * test fail: xrdp localhost
  
  Logs attached.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xrdp/+bug/1937024/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1937024] Re: xrdp log created with wrong permissions

[Jose Mari]

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
- But if logs are removed (backup, logrotate, etc.), when restart, xrdp
- creates logs with wrong permissions:
+ But if logs and run are removed (backup, logrotate, etc.), when restart,
+ xrdp  creates logs with wrong permissions:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
  
  And xrdp-sesman crashes. When permissions are set, xrdp runs normally.
- 
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
  * test ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
- * removelogs: sudo rm -f /var/log/xrdp*
+ * remove logs: sudo rm -f /var/log/xrdp*
+ * remove run: sudo rm -rf /run/xrdp
  * start: sudo systemctl start xrdp
  * test fail: xrdp localhost
  
  Logs attached.

** Package changed: xubuntu-meta (Ubuntu) => xrdp (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xrdp/+bug/1937024/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1937024] Re: xrdp log created with wrong permissions

[Jose Mari]

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
- But if logs are removed (backup, logrotate, etc.), when restart, xrdp
- creates logs with wrong permissions:
+ But if logs and run are removed (backup, logrotate, etc.), when restart,
+ xrdp  creates logs with wrong permissions:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
  
  And xrdp-sesman crashes. When permissions are set, xrdp runs normally.
- 
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
  * test ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
- * removelogs: sudo rm -f /var/log/xrdp*
+ * remove logs: sudo rm -f /var/log/xrdp*
+ * remove run: sudo rm -rf /run/xrdp
  * start: sudo systemctl start xrdp
  * test fail: xrdp localhost
  
  Logs attached.

** Package changed: xubuntu-meta (Ubuntu) => xrdp (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to xrdp in Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xrdp/+bug/1937024/+subscriptions


-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

[Bug 1937024] [NEW] xrdp log created with wrong permissions

[Jose Mari]

Public bug reported:

When xrdp (and their dependencies) are installed and running, the log
permissions are:

root@host01~# ls -l  /var/log/xrdp*
-rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
-rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log

But if logs are removed (backup, logrotate, etc.), when restart, xrdp
creates logs with wrong permissions:

root@host01~# ls -l  /var/log/xrdp*
-rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log

And xrdp-sesman crashes. When permissions are set, xrdp runs normally.


Steps to reproduce it:

* install: sudo apt install -y xrdp
* start: sudo systemctl start xrdp
* test ok: sudo xrdp localhost
* stop: sudo systemctl stop xrdp
* removelogs: sudo rm -f /var/log/xrdp*
* start: sudo systemctl start xrdp
* test fail: xrdp localhost

Logs attached.

** Affects: xubuntu-meta (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: xrdp

** Attachment added: "All logs in one file"
   https://bugs.launchpad.net/bugs/1937024/+attachment/5512393/+files/xrdp.log

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
- But if logs are removed (backup, logrotate, etc.),
+ But if logs are removed (backup, logrotate, etc.), when restart, xrdp
+ creates logs with wrong permissions:
+ 
+ 
+ root@host01~# ls -l  /var/log/xrdp*
+ -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
  
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
  * text ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
  * removelogs: sudo rm -f /var/log/xrdp*
  * start: sudo systemctl start xrdp
  * test: xrdp localhost
  
- 
  Logs attached.

** Description changed:

  When xrdp (and their dependencies) are installed and running, the log
  permissions are:
  
  root@host01~# ls -l  /var/log/xrdp*
  -rw-r- 1 xrdp adm 33138 jul 20 09:45 /var/log/xrdp.log
  -rw-r- 1 root adm 18608 jul 20 09:45 /var/log/xrdp-sesman.log
  
  But if logs are removed (backup, logrotate, etc.), when restart, xrdp
  creates logs with wrong permissions:
  
- 
  root@host01~# ls -l  /var/log/xrdp*
  -rw--- 1 root root 587 jul 20 11:46 /var/log/xrdp-sesman.log
+ 
+ And xrdp-sesman crashes. When permissions are set, xrdp runs normally.
  
  
  Steps to reproduce it:
  
  * install: sudo apt install -y xrdp
  * start: sudo systemctl start xrdp
- * text ok: sudo xrdp localhost
+ * test ok: sudo xrdp localhost
  * stop: sudo systemctl stop xrdp
  * removelogs: sudo rm -f /var/log/xrdp*
  * start: sudo systemctl start xrdp
- * test: xrdp localhost
+ * test fail: xrdp localhost
  
  Logs attached.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1937024

Title:
  xrdp log  created with wrong permissions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xubuntu-meta/+bug/1937024/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Pharo-users] Re: Communication between different images

[Jesus Mari Aguirre]

On ZeroMQ it could be something like that...first you need a broker (a
proxy) using XSUB and XPUB.
In one pharo image... (I think this part better be done in C because it
will freezy the image forever but it works)

 | frontend backend |
frontend := ZmqXSubscriberSocket new.
frontend bind: 'tcp://*:5559'.
backend := ZmqXPublisherSocket new.
backend bind: 'tcp://*:5560'.
ZmqProxy frontend: frontend backend: backend capture: nil

In any publisher or subscriber...

publisher := ZmqPublisherSocket new connect: 'tcp://localhost:5559'.

pr1 := [
|subscriber1|
subscriber1 := ZmqSubscriberSocket new connect: 'tcp://localhost:5560'.
[true] whileTrue:[
  "receive is non blocking so this is an infinite loop"

subscriber1 receiveIfAvailable: [ :messageData|

messageData isEmpty ifFalse:[Transcript show: ('Subscriber 1 got stuff ' ,
messageData);cr]]

]] forkNamed: 'subscriber1'.

"Publish doing that"
 publisher send: ('Hello Subscribers') asByteArray.

El jue, 1 jul 2021 a las 21:03, Esteban Maringolo ()
escribió:

> On Thu, Jul 1, 2021 at 3:00 PM Jesus Mari Aguirre
>  wrote:
> >
> > As far as I know, zmq doesn't need a broker but subscribers should know
> the address of the publisher, if the network increases its complexity with
> more publishers you need a broker,  that is a proxy on zmq.
> > If I understand well you need any of them should be able to publish a
> change to all of the other images?
>
> I want to broadcast notifications of updated objects so they can be
> recomputed or reloaded from the database to reflect the latest
> changes.
> The change might happen in any of the worker images, either by user UI
> or API call.
>
> Regards!
>
> Esteban A. Maringolo
>

[Pharo-users] Re: Communication between different images

[Jesus Mari Aguirre]

As far as I know, zmq doesn't need a broker but subscribers should know the
address of the publisher, if the network increases its complexity with more
publishers you need a broker,  that is a proxy on zmq.
If I understand well you need any of them should be able to publish a
change to all of the other images?

El mar., 29 jun. 2021 20:11, Esteban Maringolo 
escribió:

> As far as I understand, ZeroMQ does not require a broker to perform
> the communication between publishers and subscribers, I don't know how
> that is implemented (what do they connect to? how each client
> discovers each other?).
>
> I already got MQTT running, It's not completely clear to me how the
> QoS setting works (atLeastOnce, exactlyOnce, atMostOnce), I don't
> remember using that setting in Java (it probably had a sensible
> default).
>
> Regards!
>
>
> Esteban A. Maringolo
>
> On Tue, Jun 29, 2021 at 2:45 PM Jesus Mari Aguirre
>  wrote:
> >
> > Maybe ZeroMQ fits you, but unlucky is not documented and there are only
> a few examples. I use ir in my jupyter kernel. You can install my port to
> pharo64 uFFI doing:
> >
> > Metacello new
> > baseline: 'JupyterTalk';
> > repository: 'github://jmari/JupyterTalk:master/repository';
> > load:'zmq'
> >
> > But it needs ZeroMQ previously installed on your system.
> > It was ported from http://smalltalkhub.com/#!/~panuw/zeromq now it is
> at: https://github.com/dellani/zeroMQ but I'm not sure if the original
> repo works on newer PharosI had no time to contact the original author
> to join both repos...
> >
> >
> >
> > El mar, 29 jun 2021 a las 4:56, Esteban Maringolo ()
> escribió:
> >>
> >> Hi,
> >>
> >> I'm rearchitecting a web app to perform updates only when necessary
> >> (instead of computing them all the time) on each request, I can have a
> >> global announcer and subscribers to know when to update within an
> >> image, but is there a way to have something like that but for
> >> inter-image coordination?
> >>
> >> I'd only need to communicate the id and the class name (or a similar
> >> identifier), so on other images they'll update accordingly, and if
> >> there is an update in one image, it will notify the other images. The
> >> common data is on the database, so this is just to avoid re-reading a
> >> lot of things.
> >>
> >> Is a message queue a good fit for this? Pub/Sub?
> >> What is available in Pharo that works without having to set up a lot of
> things?
> >>
> >> Thanks!
> >>
> >> Esteban A. Maringolo
>

[Pharo-users] Re: Communication between different images

[Jesus Mari Aguirre]

Maybe ZeroMQ fits you, but unlucky is not documented and there are only a
few examples. I use ir in my jupyter kernel. You can install my port to
pharo64 uFFI doing:

Metacello new
baseline: 'JupyterTalk';
repository: 'github://jmari/JupyterTalk:master/repository';
load:'zmq'

But it needs ZeroMQ previously installed on your system.
It was ported from http://smalltalkhub.com/#!/~panuw/zeromq now it is at:
https://github.com/dellani/zeroMQ but I'm not sure if the original repo
works on newer PharosI had no time to contact the original author to
join both repos...



El mar, 29 jun 2021 a las 4:56, Esteban Maringolo ()
escribió:

> Hi,
>
> I'm rearchitecting a web app to perform updates only when necessary
> (instead of computing them all the time) on each request, I can have a
> global announcer and subscribers to know when to update within an
> image, but is there a way to have something like that but for
> inter-image coordination?
>
> I'd only need to communicate the id and the class name (or a similar
> identifier), so on other images they'll update accordingly, and if
> there is an update in one image, it will notify the other images. The
> common data is on the database, so this is just to avoid re-reading a
> lot of things.
>
> Is a message queue a good fit for this? Pub/Sub?
> What is available in Pharo that works without having to set up a lot of
> things?
>
> Thanks!
>
> Esteban A. Maringolo
>

[Pharo-users] Re: voyage in singleton mode

[Jesus Mari Aguirre]

Thanks Norbert! Voyage is a great piece of software.

El mar., 1 jun. 2021 11:53, Norbert Hartl  escribió:

> You should not have to worry. The two possible culprits are the VOCache
> which should be thread safe done by a semaphore. The other one is the
> connection to the database. Here the connection pool removes that problem.
>
> Hope that answers your question. I use it just as it is in a concurrent
> environment.
>
> Norbert
>
>
> > Am 01.06.2021 um 11:34 schrieb Jesus Mari Aguirre <
> jmariagui...@gmail.com>:
> >
> > Hello all, I'm developing a tepot+voyage(mongodb) web app and I have one
> doubt, is voyage thread safe? or do I have to take care about using a Mutex
> because multiple teapot instances can call it.
> > Thank you all!
>

[Pharo-users] voyage in singleton mode

[Jesus Mari Aguirre]

Hello all, I'm developing a tepot+voyage(mongodb) web app and I have one
doubt, is voyage thread safe? or do I have to take care about using a Mutex
because multiple teapot instances can call it.
Thank you all!

[plasmashell] [Bug 430659] New: external monitor flickering

[Luca Mari]

https://bugs.kde.org/show_bug.cgi?id=430659

Bug ID: 430659
   Summary: external monitor flickering
   Product: plasmashell
   Version: 5.19.5
  Platform: Kubuntu Packages
OS: Linux
Status: REPORTED
  Severity: normal
  Priority: NOR
 Component: general
  Assignee: k...@davidedmundson.co.uk
  Reporter: lucapaolom...@gmail.com
CC: plasma-b...@kde.org
  Target Milestone: 1.0

SUMMARY
Running Kubuntu on a laptop, the windows of some applications have random
flickering when moved to an external monitor, whereas the laptop monitor always
works correctly. In the worst cases the external monitor becomes black until
the flickering window is closed.

STEPS TO REPRODUCE
With Kubuntu on a laptop, the window of an application that is opened or moved
to an external monitor flickers, and in some cases the external monitor becomes
black. This happens very often but only with some apps: for example Thunderbird
and Firefox, and sometimes Libreoffice, but not Chrome (and the KDE apps I
tested work well too).
The external monitor is connected to the laptop with a VGA cable.

I have already tried what follows, with no results:
-- when possible, disabled hardware acceleration in the concerned apps;
-- set the external monitor as a replica or an extension of the laptop monitor;
-- changed the external monitor Refresh rate and Resolution;
-- changed all parameters of the Compositor (Scale method, Rendering backend,
Tearing prevention);
-- changed XOrg to Wayland.

Operating System: Kubuntu 20.10
KDE Plasma Version: 5.19.5
KDE Frameworks Version: 5.74.0
Qt Version: 5.14.2
Kernel Version: 5.8.0-33-generic
OS Type: 64-bit
Processors: 4 × Intel® Core™ i7-7500U CPU @ 2.70GHz
Memory: 7,5 GiB of RAM
Graphics Processor: Mesa Intel® HD Graphics 620

-- 
You are receiving this mail because:
You are watching all bug changes.

[plasmashell] [Bug 421498] Desktop settings get nuked on every startup

[Luca Mari]

https://bugs.kde.org/show_bug.cgi?id=421498

Luca Mari  changed:

   What|Removed |Added

 CC||lucapaolom...@gmail.com
   Platform|Manjaro |Kubuntu Packages
Version|5.19.3  |5.19.5

--- Comment #16 from Luca Mari  ---
With my configuration (Kubuntu 20.10, KDE Plasma 5.19.5) the bug appears only
in the specific  case an external monitor is attached. In this case my setting
of Desktop Layout, Desktop, is always changed to Folder View.

-- 
You are receiving this mail because:
You are watching all bug changes.

Default installurl and Package Source

[Tito Mari Francis Escaño]

Hi misc,
I recently installed 6.8 on VM then applied errata patches.
When I tried to install git, it complained that git is not in the
packages-stable folder, I was pleasantly surprised. The
/etc/installurl by default is http://cdn.openbsd.org/pub/OpenBSD, and
I got error 503 on the site. Checking the default URL indicates it may
be down, same goes for Cloudflare CDN, Verizon seems working alright.
When I changed /etc/installurl to where I used to get packages:
http://ftp.jaist.ac.jp/pub/OpenBSD, it worked as expected.
This raised the following questions:
Does this mean when we apply errata patches, we're now automatically
using stable release and need to use stable packages?
Is it advisable to keep the /etc/installurl automatically default to
http://cdn.openbsd.org/pub/OpenBSD or should users be advised to
select packages from package sources geographically near them?
Please advise. Thanks and keep up the great work.

Re: FADY Basta

[Mariana Lupo mari...@rodriguezlupo.com.ar [federacionargentinadeyoga]]

NO MAS MAILS POR FAVOR
BASTA

> El 30 nov. 2020, a las 19:15, nataliaazz...@hotmail.com 
> [federacionargentinadeyoga]  
> escribió:
> 
> 
> Por favor no quiero recibir más estas cadenas de mails.
> Gracias!!!
> 
> El 30 nov. 2020 5:37 p. m., "'camila F.' camilafranc...@yahoo.com.ar 
>  [federacionargentinadeyoga]" 
>  > escribió:
>  
> 
> 
> NO QUIERO PERTENECER A ESTE GRUPO
> k-mi
> 
> 
> 
> El lunes, 30 de noviembre de 2020 05:45:37 ART, 'muriel...@yahoo.com 
> ' muriel...@yahoo.com 
>  [federacionargentinadeyoga] 
>  > escribió:
> 
> 
>  
> 
> Por favor quiero desvincularme de esta cadena y no recibir más mensajes. 
> Gracias
> 
> 
> 

Re: Osmand on iOS stuck on north orientation.

[Giuseppe Mari]

same issue,  map orientation threshold is 0 mph or 0 km/ h but   i can´t 
change the orientation of the map to the direction of movement.  

Il giorno martedì 20 ottobre 2020 alle 11:28:28 UTC+2 F ha scritto:

> I checked now, and it was already set to 0 km/h. 
>
> I reinstalled the Osmand app yesterday, so all settings should be set to 
> default. 
>
> -audun 
>
> tirsdag 20. oktober 2020 kl. 10:46:33 UTC+2 skrev wah.w...@gmail.com:
>
>> Hi,
>>
>> Have you tried setting the Map orientation threshold to 0 mph or 0 km/h?
>>
>> You find it in Navigation setting>Map behavior.
>>
>> Wah
>>
>>  
>>
>> Sent from Mail  for 
>> Windows 10
>>
>>  
>>
>> *From: *F
>> *Sent: *20 October 2020 09:21
>> *To: *OsmAnd
>> *Subject: *Re: Osmand on iOS stuck on north orientation.
>>
>>  
>>
>> Thank you!
>>
>>  
>>
>> I use version 3.81 of Osmand on a iPhone 7 with iOS 14.0.1
>>
>>  
>>
>> mandag 19. oktober 2020 kl. 17:31:34 UTC+2 skrev dmpr...@gmail.com:
>>
>> Hello! Thank you for the feedback.
>>
>> We will investigate the issue and will fix it soon.
>>
>> On Monday, October 19, 2020 at 10:20:21 AM UTC+3 F wrote:
>>
>> Hi!
>>
>> When viewing maps, whatever i do i can´t change the orientation of the 
>> map to the direction of movement. Even when i have chosen this in settings 
>> or try to toggle the compass button it´s still stuck on north direction. I 
>> can rotate the map though, but i would like to see which way i´m going as 
>> well.
>>
>>  
>>
>> Am i doing something wrong or is this some kind of bug?
>>
>>  
>>
>> -audun 
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "OsmAnd" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to osmand+un...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/osmand/8a3efe8c-472e-47c9-b727-4959133de92an%40googlegroups.com
>>  
>> 
>> .
>>
>>  
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"OsmAnd" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to osmand+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/osmand/0aef8433-5c9c-4a9a-93d0-28f7790e5a98n%40googlegroups.com.

Pipelining in HTTP 1.1

[Dorit Mari via curl-library]

Hello,

I know that support for pipelining in HTTP 1.1 was removed 
(https://github.com/curl/curl/commit/2f44e94efb3df8e50bb2ddbc4ec6b569a6424517).
In our application, we need to use pipelining in HTTP 1.1, so we are trying to 
restore and fix the pipelining support in libcurl.
In the commit that removed pipelining, it's written below that "pipelining code 
had a few rather nasty known issues". Does anyone know what were these issues, 
and what part of the code caused them?
Currently, we "patched" the old pipelining code on a recent libcurl version. 
Under low load it works OK, but under high load with TLS (e.g. 300 HTTP 
requests per second) we encounter problems; requests time out, and afterwards 
libcurl keeps opening and closing connections repeatedly, for no clear reason. 
Is this one of the known problems that led to removing the pipelining code?

Thanks,
Dorit


This email and any files transmitted with it are confidential material. They 
are intended solely for the use of the designated individual or entity to whom 
they are addressed. If the reader of this message is not the intended 
recipient, you are hereby notified that any dissemination, use, distribution or 
copying of this communication is strictly prohibited and may be unlawful.

If you have received this email in error please immediately notify the sender 
and delete or destroy any copy of this message
---
Unsubscribe: https://cool.haxx.se/list/listinfo/curl-library
Etiquette:   https://curl.haxx.se/mail/etiquette.html

Bluetooth adapter that works with OpenBSD

[Tito Mari Francis Escaño]

Hi misc,
I'm building an OpenBSD desktop PC and would like to use my Royal Kludge
RK71 mechanical keyboard with it via USB Bluetooth dongle.
Can somebody please point me to USB Bluetooth dongles tested working with
OpenBSD?
Hopefully you can guide me.
Thanks so much.

Recommended Mini-ITX board

[Tito Mari Francis Escaño]

Good day misc,
Planning to build a small form factor PC, can somebody please recommend a
mini-ITX Ryzen 5 3000 motherboard that's tested to work very well with
OpenBSD? Ang gotchas I have to watch out for?
Looking forward to hearing from you.
Thanks so much.

RE: test

[sue-mari sauer]

Ping back

Sent from Mail for Windows 10

From: Sven Constable
Sent: Thursday, August 13, 2020 5:25 PM
To: xsi_list@googlegroups.com
Subject: test

ping
--
You received this message because you are subscribed to the Google Groups 
"Softimage Mailing List" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
xsi_list+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/xsi_list/002301d67182%24ff55ab60%24fe010220%24%40imagefront.de.

-- 
You received this message because you are subscribed to the Google Groups 
"Softimage Mailing List" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to xsi_list+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/xsi_list/AM6PR0102MB315799BDAAA949F543F0FAEADC430%40AM6PR0102MB3157.eurprd01.prod.exchangelabs.com.

OpenBSD and HP ProBook 445 G7

[Tito Mari Francis Escaño]

Good day to everyone at misc.
Has anybody tried tried checking how OpenBSD worked with HP ProBook 445 G7
with Ryzen 5 or 7 4000 and Intel AX200 WLAN card?
Unfortunately, being in the Philippines, I can't yet check because it's not
yet available here, and I was hoping someone in the community can verify if
it work well or not.
Hope somebody can advise me and the community on this. Thanks so much.

RE: High CPU Usage when using libcurl with c-ares

[Dorit Mari via curl-library]

Hi,

We upgraded the version of libcurl we're working with to 7.70.0, and the 
problem persists.
I'm sorry, but currently I can't produce a small example source code that 
reproduces the issue.
What do you mean by "resolver socket" and "transfer socket"?
Since the problem happens under heavy load of multiple parallel HTTP requests, 
I don't think I can't point to a specific "transfer state".

Thanks,
Dorit

-Original Message-
From: Daniel Stenberg [mailto:dan...@haxx.se]
Sent: Tuesday, June 16, 2020 00:51
To: Dorit Mari via curl-library 
Cc: Dorit Mari 
Subject: Re: High CPU Usage when using libcurl with c-ares

On Sun, 14 Jun 2020, Dorit Mari via curl-library wrote:

> I use libcurl version 7.65.3. The OS is Linux. I always use
> CURLOPT_RESOLVE

...

> libcurl compiled without this flag (45% vs. 12%).

Wow, that's seem super strange. How on earth can the resolving code - that you 
don't even use - affect the CPU load of the transfer phase? And to that serious 
degree!

Does the resolver socket linger around during the transfer for you so that you 
monitor and "act" on it too, in addition to the transfer socket?

In which transfer states do you see this increased CPU load, do you know?

Can you show us a small example source code that reproduces the load issue for 
you?

> Is there any such known problem/solution?

Not that I can think of. It is of course always clever to build with the latest 
version as a test shot and see if it makes anything different, it
*might* save us from debugging and chasing ghosts.

--

  / daniel.haxx.se | Commercial curl support up to 24x7 is available!
   | Private help, bug fixes, support, ports, new features
   | 
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.wolfssl.com%2Fcontact%2Fdata=02%7C01%7CDorit.Mari%40audiocodes.com%7C445e710daa2d4fcadcaa08d811762f48%7C1911c65c893b42f983fa66c1b86fdf85%7C1%7C0%7C637278546589834396sdata=2c%2BIwTkCw%2FIJFFawwWZOkhoa2%2FJA%2BlEAUg79Vr%2F6O1o%3Dreserved=0
This email and any files transmitted with it are confidential material. They 
are intended solely for the use of the designated individual or entity to whom 
they are addressed. If the reader of this message is not the intended 
recipient, you are hereby notified that any dissemination, use, distribution or 
copying of this communication is strictly prohibited and may be unlawful.

If you have received this email in error please immediately notify the sender 
and delete or destroy any copy of this message

---
Unsubscribe: https://cool.haxx.se/list/listinfo/curl-library
Etiquette:   https://curl.haxx.se/mail/etiquette.html

High CPU Usage when using libcurl with c-ares

[Dorit Mari via curl-library]

Hi,

I encountered a problem of high CPU usage when using libcurl with c-ares option.

I'm using libcurl in a program for sending many HTTP requests in parallel (with 
a Multi handle). I use libcurl with libev, loosely based on the example in 
https://curl.haxx.se/libcurl/c/evhiperfifo.html.
I use libcurl version 7.65.3. The OS is Linux.
I always use CURLOPT_RESOLVE option to specify the resolution of the 
destination host, so libcurl shouldn't be doing any DNS resolutions (and 
indeed, the only functions in asyn-ares.c that are called are 
Curl_resolver_init, Curl_resolver_kill, Curl_resolver_cancel, 
destroy_async_data and Curl_resolver_cleanup).
When libcurl is compiled with flag "--enable-ares", the CPU usage of the 
relevant thread is much higher than the same code, but with libcurl compiled 
without this flag (45% vs. 12%).

Is there any such known problem/solution?

Thanks,
Dorit


This email and any files transmitted with it are confidential material. They 
are intended solely for the use of the designated individual or entity to whom 
they are addressed. If the reader of this message is not the intended 
recipient, you are hereby notified that any dissemination, use, distribution or 
copying of this communication is strictly prohibited and may be unlawful.

If you have received this email in error please immediately notify the sender 
and delete or destroy any copy of this message
---
Unsubscribe: https://cool.haxx.se/list/listinfo/curl-library
Etiquette:   https://curl.haxx.se/mail/etiquette.html

Re: [Pharo-users] Primitive is not executed

[Jesus Mari Aguirre]

Eso es, Guille!!
that was the problem, both arrays should be of the same type/format, I
tried the method calling a replaceFrom: 1 to: 2 with: #(1 2 3) startingAt:
1. so I was passing an Array object instead, so I'm doing the right thing
but wrong testing! Thanks a lot!
I'm not on Discord but I could activate an account if it is more
comfortable to you...

El mié., 10 jun. 2020 a las 10:46, Guillermo Polito (<
guillermopol...@gmail.com>) escribió:

> Hi Jesus,
>
> We have looked at it with Pablo. We were wondering too if you could give
> us a reproducible case for what is not working with you, because we have
> tested it and it seems to be working (details below).
>
> The array replace primitive is a generic primitive that handles the
> replace of arrays of objects and arrays of native values (8, 16, 32, 64bit
> values).
> Now, for the primitive to work, both arrays should be of the same
> type/format.
>
> “All these examples do use the primitive"
> a := WordArray withAll: #( 1 2 3 4 ).
> b := WordArray withAll: #( 5 6 ).
>
> a replaceFrom: 1 to: 2 with: b startingAt: 1.
>
> a := DoubleWordArray withAll: #( 1 2 3 4 ).
> b := DoubleWordArray withAll: #( 5 6 ).
>
> a replaceFrom: 1 to: 2 with: b startingAt: 1.
>
> “All these examples do not use the primitive"
> a := DoubleWordArray withAll: #( 1 2 3 4 ).
> b := ByteArray withAll: #( 5 6 ).
>
> a replaceFrom: 1 to: 2 with: b startingAt: 1.
>
> a := DoubleWordArray withAll: #( 1 2 3 4 ).
> b := Array withAll: #( 5 6 ).
>
> a replaceFrom: 1 to: 2 with: b startingAt: 1.
>
> If you tell us a bit more we could probably be of more help.
> Also, we were looking for you in discord to ask you questions, are you
> there?
> Guille
>
> El 9 jun 2020, a las 21:31, Jesus Mari Aguirre 
> escribió:
>
> Thanks for your response
> I've tried in WordArray and ByteArray and same behaviour, primitive 105
> fails and executes the code after the primitive call.
> It is Pharo 8.0 64 on Mac Os X...I will try on Ubuntu 19.4...as soon as I
> can.
> the same problem in all of the Collection-Native all of them use primitive
> 105
>
> 
>
> El mar., 9 jun. 2020 a las 18:34, Stéphane Ducasse (<
> stephane.duca...@inria.fr>) escribió:
>
>> Hello
>>
>> I am developing a "numpy arrays" like  framework on pharo,
>>
>>
>> Cool
>>
>> I decided to use an Array type depending on the class of its elements (I
>> thought it would be more efficient) i.e if the array contains floats it
>> will be stored in a floatArray but if contains integers, a IntegerArray
>> will be used.
>>
>>
>> Did you check the WordArray class and friend?
>>
>>
>> I make an extensive use of use of the method replaceFrom: start to: stop
>> with: replacement startingAt: repStart when I do concat and other
>> methods that imply copying but I've realize that primitive 105 is not
>> executes when I call this method from these kind of arrays but it works if
>> I use a normal Array.
>> What do you suggest me to do? is it better to use the normal Array for
>> every type of content or is it a bugg? Is FloatArray/IntegerArray more
>> efficient in any way? If not...what is their purpose?
>>
>>
>> I read the code and I do not understand why this primitives have all the
>> same number.
>> May be this is normal. I will ask around.
>>
>>
>> replaceFrom: start to: stop with: replacement startingAt: repStart
>> "Primitive. This destructively replaces elements from start to stop in
>> the receiver starting at index, repStart, in the collection, replacement.
>> Answer the receiver. Range checks are performed in the primitive only.
>> Optional. See Object documentation whatIsAPrimitive."
>> 
>> super replaceFrom: start to: stop with: replacement startingAt: repStart
>>
>>
>> S.
>> 
>> Stéphane Ducasse
>> http://stephane.ducasse.free.fr / http://www.pharo.org
>> 03 59 35 87 52
>> Assistant: Aurore Dalle
>> FAX 03 59 57 78 50
>> TEL 03 59 35 86 16
>> S. Ducasse - Inria
>> 40, avenue Halley,
>> Parc Scientifique de la Haute Borne, Bât.A, Park Plaza
>> Villeneuve d'Ascq 59650
>> France
>>
>>
>

[Pharo-users] Primitive is not executed

[Jesus Mari Aguirre]

I am developing a "numpy arrays" like  framework on pharo, I decided to use
an Array type depending on the class of its elements (I thought it would be
more efficient) i.e if the array contains floats it will be stored in a
floatArray but if contains integers, a IntegerArray will be used.
I make an extensive use of use of the method replaceFrom: start to: stop
with: replacement startingAt: repStart when I do concat and other methods
that imply copying but I've realize that primitive 105 is not executes when
I call this method from these kind of arrays but it works if I use a normal
Array.
What do you suggest me to do? is it better to use the normal Array for
every type of content or is it a bugg? Is FloatArray/IntegerArray more
efficient in any way? If not...what is their purpose?


replaceFrom: start to: stop with: replacement startingAt: repStart
"Primitive. This destructively replaces elements from start to stop in the
receiver starting at index, repStart, in the collection, replacement.
Answer the receiver. Range checks are performed in the primitive only.
Optional. See Object documentation whatIsAPrimitive."

super replaceFrom: start to: stop with: replacement startingAt: repStart

[Geoserver-users] Failed to create ImageMosaic - java.util.Date cannot be cast to org.geotools.util.DateRange

[Riccardo Mari]

Hi all,
after updating the geoserver version from 2.16.2 to 2.16.3 i have a problem
creating an ImageMosaic DataStore
This is the error I find in the log:
java.util.Date cannot be cast to org.geotools.util.DateRange

Attached is the entire log file and the accessory files to create the
imagemosaic

oracle jdk 8
tomcat9
geoserver: 2.16.3

Everything works fine in 2.16.2

Thanks in advance, Riccardo


datastore.properties
Description: Binary data


geoserver.log
Description: application/dflog


indexer.properties
Description: Binary data


timeregex.properties
Description: Binary data
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

libcurl - HTTP - The logic for reusing connections and the reasons for closing connections

[Dorit Mari via curl-library]

Hello,

I'm looking for help understanding the way libcurl reuses connections and the 
reasons for it closing connections which should be reusable for sending HTTP 
requests
(HTTP 1.1 protocol).
I'm using libcurl in a program for sending many HTTP requests in parallel. I 
use libcurl with libev, loosely based on the example in 
https://curl.haxx.se/libcurl/c/evhiperfifo.html.
I use libcurl version 7.65.3.
I use libcurl to send HTTP requests at a constant rate for some minutes 
(between 8 - 30 minutes). The destination is always an explicit IP address (no 
DNS resolution needed).
My problem is that during my test runs, libcurl closes connections, and later 
opens new connections to the same destinations.

I set option CURLMOPT_MAXCONNECTS with a very large number, and so connections 
don't close because of a limitation on the max size of the connection's cache.
In a setup with Windows OS, I send ~60 HTTP requests per second, all to the 
same constant IP address. Even though the load stays constant for minutes, 
libcurl occasionally
closes a connection because it hasn't been used for too long (in function 
"conn_maxage"), and shortly afterwards it opens another connection to the same 
destination.
I know libcurl has multiple connections open towards the same destination due 
to the load. How come it doesn't use one of them for almost 2 minutes, leading
to its closure? libcurl did send many more requests during the 2 minutes than 
the number of open connections. I assumed that libcurl chooses which connection 
to reuse
in a round-robin manner. Is it not so? How libcurl chooses which of the open 
connections to use when it sends a request? Is this behavior influenced by some 
CURL option? Can someone please direct me to the code where libcurl chooses a 
free connection from the cache for sending a request?

In another setup with Linux OS, I need to send hundreds (e.g. 600) of HTTP 
requests per second. There are 10 destination IP addresses. I send requests to 
them
in a roughly balanced manner. libcurl also closes connections in this case; 
this time, it does it both from function "conn_maxage", and from function 
"multi_done"
(("conn->bits.close" is true, although I didn't use an option to prevent 
libcurl from reusing connections, and
"(premature && !(conn->handler->flags & PROTOPT_STREAM))" is true). I read the 
comments describing these conditions, but I don't really understand...
Can someone please explain why libcurl closes the connection in this case?

Thanks,
Dorit

This email and any files transmitted with it are confidential material. They 
are intended solely for the use of the designated individual or entity to whom 
they are addressed. If the reader of this message is not the intended 
recipient, you are hereby notified that any dissemination, use, distribution or 
copying of this communication is strictly prohibited and may be unlawful.

If you have received this email in error please immediately notify the sender 
and delete or destroy any copy of this message
---
Unsubscribe: https://cool.haxx.se/list/listinfo/curl-library
Etiquette:   https://curl.haxx.se/mail/etiquette.html

[sumo-user] on-demand service

[Mari Fadi]

Hello,

I want to do on-demand implementation in SUMO. So I don't know how to do it, 
that someone presses a button at one of the stops and the shuttle will come?


Thanks for the help!



Cheers,

Fadi
___
sumo-user mailing list
sumo-user@eclipse.org
To unsubscribe from this list, visit 
https://www.eclipse.org/mailman/listinfo/sumo-user

Re: musicxml2ly 2.20 bug

[mari+lilypond]

It's no bug in musicxml2ly. I compiled v2.20 from source and it works as
expected. Either it's a problem with the manjaro repository or with your
python environment.

On 3/22/20 10:15 AM, Martin Tarenskeen wrote:
> 
> 
> On Sun, 22 Mar 2020, Павел Буданов wrote:
> 
>> I tried to use musicxml2ly from official repository of manjaro linux
>> and get this output:
>> Traceback (most recent call last):
>>   File "/usr/bin/musicxml2ly", line 44, in 
>>     import lilylib as ly
>> ImportError: No module named lilylib
>> Then I tried to install lilypond from official cite via shell script.
>> It gives following output:
>>   File "./lilypond/usr/bin/musicxml2ly", line 2264
>>     if current_staff and staff <> current_staff and not
>> n.get_maybe_exist_named_child('chord'):
>>                                 ^
>> SyntaxError: invalid syntax
>>
>>
> 
> Python 2 vs 3 issue?
> 
> 
> MT

Re: wrong note name conversion in musicxml2ly

[mari+lilypond]

You are right. It was My fault. I did use the wrong path.

Thank you for fixing.

On 2/16/20 6:30 PM, David Kastrup wrote:
> mari+lilyp...@mailbox.org writes:
> 
>> As far as I understand the closed issue 5746 should fix the problem
>> musicxml2ly generating the note name "bes" instead of "heses" with
>> --language=deutsch.
>>
>> In fact the problem is not fixed in the actual git repository. See my
>> attached mxl-file and the ly output of
>> musicxml2ly --language=deutsch --nd --nrp --npl  xml_test.mxl
>> which still contains "bes".
> 
> I think the \version string points to you using the wrong musicxml2ly
> executable.
> 
> I get
> 
> 
> 
> 
> ___
> bug-lilypond mailing list
> bug-lilypond@gnu.org
> https://lists.gnu.org/mailman/listinfo/bug-lilypond
> 

___
bug-lilypond mailing list
bug-lilypond@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-lilypond

Re: wrong note name conversion in musicxml2ly

[mari+lilypond]

As far as I understand the closed issue 5746 should fix the problem
musicxml2ly generating the note name "bes" instead of "heses" with
--language=deutsch.

In fact the problem is not fixed in the actual git repository. See my
attached mxl-file and the ly output of
musicxml2ly --language=deutsch --nd --nrp --npl  xml_test.mxl
which still contains "bes".


On 2/11/20 5:22 PM, David Kastrup wrote:
> Torsten Hämmerle  writes:
> 
>> In any case, the current musicxml2ly problem is about heses. And the heses
>> note name definition in LilyPond (scm/define-note-names.scm) is correct and
>> should not be changed.
>> musicxml2ly must not produce a German "bes", because this clearly should be
>> "heses"
>>
>> Here's the coding for German pitch names:
>>
>>
>> Replacing generic "hes" by "b" is OK, but, that way, generic "heses" will
>> become "bes", wich is clearly wrong and will lead to the error observed.
>>
>> So obviously, it's a problem with *python substring replacement*.
>> I don't know much about python, but replace() doesn't seem to work out here.
>> Probably only a direct string comparison will help here, perhaps someone
>> knowledgeable has a more elegant solution.
> 
> Well,
> 
> Tracker issue: 5746 (https://sourceforge.net/p/testlilyissues/issues/5746/)
> Rietveld issue: 547610043 (https://codereview.appspot.com/547610043)
> Issue description:
>   Fix and align musicxml and input language "deutsch"  Has commits:
>   In \language "deutsch" use b only to replace hes  The quartertone
>   names should all be derived from h instead of b since beh was being
>   used inconsistently.   Fix deutsch language of musicxml2py  Use b
>   only for hes and nothing else.  Also use asas and asah instead of
>   ases and aseh.
> 
> should fix either.  It doesn't use patterns for hes.  Somewhat artless.
> So what.
> 


xml_test.mxl
Description: application/vnd.recordare.musicxml

\version "2.18.2"
% automatically converted by musicxml2ly from xml_test.mxl

%% additional definitions required by the score:
\language "deutsch"


\header {
encodingsoftware = "MuseScore 3.4.2"
encodingdate = "2020-02-16"
composer = Composer
title = Title
}

\layout {
\context { \Score
skipBars = ##t
autoBeaming = ##f
}
}
PartPOneVoiceOne =  \relative h' {
\clef "treble" \key c \major \numericTimeSignature\time 4/4 h4 b4
bes4 his4 | % 2
R1*31 \bar "|."
}


% The score definition
\score {
<<
\new Staff <<
\set Staff.instrumentName = "Piano"
\set Staff.shortInstrumentName = "Pno."
\context Staff << 
\context Voice = "PartPOneVoiceOne" { \PartPOneVoiceOne }
>>
>>

>>
\layout {}
% To create MIDI output, uncomment the following line:
%  \midi {}
}

___
bug-lilypond mailing list
bug-lilypond@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-lilypond

[sumo-user] Bus route

[Mari Fadi]

Good morning,

I would like to have three buses run in a certain time. These buses are 
supposed to drive a short distance in the early morning and drive this route 
again in the evening at the end. These buses should run at intervals, i.e. if 
the first bus is at the last station then the next should start at the first 
station and so on until the end of operations(from 6 am. to 5 pm.). I don't 
know how to do it but I started to define the stops and a route. Could you 
please help me. Thanks alot!

http://www.w3.org/2001/XMLSchema-instance; 
xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd;>














   










kind regards,
Mary Fadi


___
sumo-user mailing list
sumo-user@eclipse.org
To change your delivery options, retrieve your password, or unsubscribe from 
this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user

Re: wrong note name conversion in musicxml2ly

[mari+lilypond]

According to
http://www.ekmelic-music.org/de/extra/name24.htm
the "beh" in Netherlands or "bqf" in English does correspond indeed to
"heh" in German. But I never worked with quarter notes.


On 2/9/20 5:52 PM, David Kastrup wrote:
> mari+lilyp...@mailbox.org writes:
> 
>>> On 2/9/20 1:49 PM, David Kastrup wrote:
>>>> mari+lilyp...@mailbox.org writes:
>>>>
>>>>> when converting a mxl file with "musicxml2ly --language=deutsch" the
>>>>> note "beses" is converted to "bes". Lilypond gives an error at this
>>>>> notename with \language "deutsch", because the correct german notename
>>>>> for "double flat b" is "heses". This happens with all musicxml2ly
>>>>> versions at least from 2.18.2 to 2.21.0.
>>>>
>>>> Just trying to fix it, but I find the following in
>>>> scm/define-note-names.ly in the German section:
>>>>
>>>> (heses . ,(ly:make-pitch -1 6 DOUBLE-FLAT))
>>>> (heseh . ,(ly:make-pitch -1 6 THREE-Q-FLAT))
>>>> (b . ,(ly:make-pitch -1 6 FLAT))
>>>> (beh . ,(ly:make-pitch -1 6 SEMI-FLAT))
>>>> (h . ,(ly:make-pitch -1 6 NATURAL))
>>>> (hih . ,(ly:make-pitch -1 6 SEMI-SHARP))
>>>> (his . ,(ly:make-pitch -1 6 SHARP))
>>>> (hisih . ,(ly:make-pitch -1 6 THREE-Q-SHARP))
>>>> (hisis . ,(ly:make-pitch -1 6 DOUBLE-SHARP))
>>>>
>>>> That looks almost like something I could work with, except for beh .
>>>> For all other note names, the suffix -eh indicates _lowering_ by a
>>>> quarter note, whereas beh _raises_ b by a quarternote.  Shouldn't it
>>>> rather be heh , making b the _only_ exception?
>>
>> At least the output of musicxml2ly should be consistent with lilypond
>> and should not not give an error message when compiling.
>>
>> Here the german Wikipedia for "double flat b":
>> https://de.wikipedia.org/wiki/Doppel-b
> 
> That is all very well, but making musicxml2ly agree with LilyPond here
> makes mostly sense when we are reasonably sure that LilyPond will not
> need to get changed again soon.  So even while I understand that you are
> not interested in getting quarternotes working or consistent as well, I
> don't think it makes sense to not cater for consistency here too while
> I am touching the code.
> 
> Since the interest on the bug list is limited for the quarternote naming
> problem in German, I am including the developer list here.  I don't
> think the discussion will be so long that adding two separate fixes will
> prove necessary.
> 

___
bug-lilypond mailing list
bug-lilypond@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-lilypond

Re: wrong note name conversion in musicxml2ly

[mari+lilypond]

At least the output of musicxml2ly should be consistent with lilypond
and should not not give an error message when compiling.

Here the german Wikipedia for "double flat b":
https://de.wikipedia.org/wiki/Doppel-b


On 2/9/20 1:49 PM, David Kastrup wrote:
> mari+lilyp...@mailbox.org writes:
> 
>> when converting a mxl file with "musicxml2ly --language=deutsch" the
>> note "beses" is converted to "bes". Lilypond gives an error at this
>> notename with \language "deutsch", because the correct german notename
>> for "double flat b" is "heses". This happens with all musicxml2ly
>> versions at least from 2.18.2 to 2.21.0.
> 
> Just trying to fix it, but I find the following in
> scm/define-note-names.ly in the German section:
> 
> (heses . ,(ly:make-pitch -1 6 DOUBLE-FLAT))
> (heseh . ,(ly:make-pitch -1 6 THREE-Q-FLAT))
> (b . ,(ly:make-pitch -1 6 FLAT))
> (beh . ,(ly:make-pitch -1 6 SEMI-FLAT))
> (h . ,(ly:make-pitch -1 6 NATURAL))
> (hih . ,(ly:make-pitch -1 6 SEMI-SHARP))
> (his . ,(ly:make-pitch -1 6 SHARP))
> (hisih . ,(ly:make-pitch -1 6 THREE-Q-SHARP))
> (hisis . ,(ly:make-pitch -1 6 DOUBLE-SHARP))
> 
> That looks almost like something I could work with, except for beh .
> For all other note names, the suffix -eh indicates _lowering_ by a
> quarter note, whereas beh _raises_ b by a quarternote.  Shouldn't it
> rather be heh , making b the _only_ exception?
> 

___
bug-lilypond mailing list
bug-lilypond@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-lilypond

wrong note name conversion in musicxml2ly

[mari+lilypond]

when converting a mxl file with "musicxml2ly --language=deutsch" the
note "beses" is converted to "bes". Lilypond gives an error at this
notename with \language "deutsch", because the correct german notename
for "double flat b" is "heses". This happens with all musicxml2ly
versions at least from 2.18.2 to 2.21.0.

___
bug-lilypond mailing list
bug-lilypond@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-lilypond

CS>Re: silver-digest Digest V2019 #74

[Mari Auxier]

I have not been getting your text on your email messages for the last month or 
so.  Any suggestions.?  I seem to remember having problems with someone else 
using Eskimo.com.

Thanks, Mari

> On Dec 8, 2019, at 5:14 AM, silver-digest-requ...@eskimo.com wrote:
> 
> 

Dynamic Sleep time to execute next step in pipeline

[Ramesh Mari]

Hello Guys,  

This is one tricky question, Please review the problem statement and advise 
me how to  get into further.


I have pipeline code which is combined of groovy and sh script. Refer the 
below sample one, based on that the line 4 code should be execute once ssh 
commend done in the target server completely which meant the triggered 
shell script takes time to complete in target server, so its depends on 
load in the script, by that we cannot put static sleep time after the line 
3. what is the best way to achieve that.

node{
line 1 code
line 2 code
sh "ssh @: sh abc.sh or scb// line 3
line 4 code
}

-- 
You received this message because you are subscribed to the Google Groups 
"Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to jenkinsci-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/jenkinsci-users/28a8b3da-d8e3-4051-a4a3-7f6144b7ef83%40googlegroups.com.

[Geoserver-users] gs:Contour and interpolations=bilinear projection issue

[Riccardo Mari]

Hi list,
i have a problem with gs:Contour rendering transformation in conjunction
with interpolations=bilinear vendorParams.
If GetMap is performed with EPSG:3857 there is a shift between interpolated
data and contour.
In the link below you can download samples of both images and the used sld.

https://drive.google.com/file/d/1ALFhWn1wCfWcDiE6NoU0VsMviRdjkpVh/view?usp=sharing

Thanks in advance for any advice,
Regards
Riccardo

Build Information

   - GeoServer Version2.16.0
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Re: How to copy a folder one location to another location via jenkins.instance groovy scripts

[Ramesh Mari]

Hi James, 

I tried all the way what you have mentioned, but it only copy the job alone 
without build history and also the copied job as non-build able for that we 
need to trigger save function additionally.  I raised a ticket to cloudbees 
they only give support for subscription.   can you raise a ticket if 
possible. 

On Thursday, November 14, 2019 at 5:33:31 AM UTC+5:30, James Nord wrote:
>
> this is not as simple as it sounds.
>
> first off a disclaimer CloudBees (my employer) as a proprietary feature 
> that does this.
>
> the reason it is not simple is each job type may have special folders. 
>  then you have builds which again may have artifacts may have special files 
> etc etc...  trust me there is a lot of edge cases.
>
> if you can simplify things (if the source has builds the destination will 
> have the same builds) then you can do some tricks copying in the same 
> Jenkins instance.
> firstly the job structure is *normally* job/name so you can recursively 
> copy the folder job/foldername.  to job/dest/job/folder name
>
> then you need to tell the parent it has a new child by loading the XML 
> https://javadoc.jenkins.io/jenkins/model/ModifiableTopLevelItemGroup.html#createProjectFromXML-java.lang.String-java.io.InputStream-
>
> alternatively you can copy the jobs recursively
>  
> https://javadoc.jenkins.io/jenkins/model/ModifiableTopLevelItemGroup.html#copy-T-java.lang.String-
>
> or you could become a customer of cloudbees :)
>
> you could possibly also somehow use jobDSL with the seed jobs (but I have 
> never used that)
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to jenkinsci-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/jenkinsci-users/21a183fd-839b-4474-aec5-3103ed7a6263%40googlegroups.com.

How to copy a folder one location to another location via jenkins.instance groovy scripts

[Ramesh Mari]

Hello guys,
This task might have one challenge to you, the question is simple but the 
implications is very tricky.  Please refer the below questions. 

Requirements - jenkins groovy scripts 
Folder copy one location to another location via jenkins.instance.  There is 
method call items.move it does cut and paste, that same i need copy and paste. 

-- 
You received this message because you are subscribed to the Google Groups 
"Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to jenkinsci-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/jenkinsci-users/8a709eda-772c-435d-839a-bebde442e365%40googlegroups.com.

Re: Hivemall ffm classifier and class weights

[Shadi Mari]

But class weighting doesnt need recalibration, isnt?

Shadi

On Friday, November 1, 2019, Makoto Yui  wrote:

> True. And, I think oversampling is better than class weighting for
> accuracy.
>
> Makoto
>
> 2019年11月1日(金) 19:37 Shadi Mari :
>
>> Thanks for the explanation Makoto.
>>
>> Class weight option much like what scikit provides is what am referring
>> to; seems its not yet implemented and thus “random” downsampling /
>> oversampling is the only option am left with.
>>
>> Best
>>
>> On Friday, November 1, 2019, Makoto Yui  wrote:
>>
>>> class_weight is usually computed as follows:
>>> > class_weight_y = #samples / (#classes * count_of(y))
>>>
>>> In SQL, it can be computed in SQL as follows:
>>> -- For binary classification (#classes = 2)
>>>   select
>>> count(1) / 2 * sum(if(label=0, 1, 0) as neg_weight,
>>> count(1) / 2 * sum(if(label=1, 1, 0) as pos_weight
>>>   from
>>> train
>>>
>>> We need to introduce "-class_weight=[0.1,0.2]" or "-pos_weight=0.2
>>> -neg_weight=0.1" option while it's not implemented.
>>> https://github.com/scikit-learn/scikit-learn/blob/
>>> 0a7adef0058ef28c7a146734f38161f7c7c581af/sklearn/linear_
>>> model/_sgd_fast.pyx#L719
>>>
>>> select
>>>   train_classifier(features, label, "-pos_weight=0.1 -neg_weight=0.2")
>>> from
>>>   train
>>>
>>> I'm doubting class weighing scheme that modifies gradient updates
>>> works as expected.
>>> Oversampling is more reasonable approach from Optimizer point of view.
>>>
>>> Here is example to apply oversampling in Hivemall:
>>>
>>> oversampling
>>> https://github.com/treasure-data/treasure-boxes/blob/
>>> master/machine-learning-box/ctr-prediction/queries/fm_train.sql#L10
>>> calibration
>>> https://github.com/treasure-data/treasure-boxes/blob/
>>> master/machine-learning-box/ctr-prediction/queries/fm_predict.sql#L24
>>> sampling rate computation
>>> https://github.com/treasure-data/treasure-boxes/blob/
>>> master/machine-learning-box/ctr-prediction/queries/downsampling_rate.sql
>>>
>>> Thanks,
>>> Makoto
>>>
>>> 2019年10月31日(木) 21:17 Shadi Mari :
>>> >
>>> > Hi Makoto,
>>> >
>>> > libffm and Xlearn does not support class weights. However ML.NET does!
>>> >
>>> > Class weighting is another approach to handle imbalance datasets other
>>> than downsampling/oversampling; its a sort of a cost-sensitive learning.
>>> >
>>> > I am not sure how SQL will help given than weights have to be
>>> incorporated into the loss function during training.
>>> >
>>> > Thanks
>>> >
>>> > On Thu, Oct 31, 2019 at 1:05 PM Makoto Yui  wrote:
>>> >>
>>> >> Hi Mari,
>>> >>
>>> >> Do you have a specific example that does class weighting?
>>> >>
>>> >> libffm does not have such feature.
>>> >> https://github.com/ycjuan/libffm
>>> >>
>>> >> Sckit SGD [1] adjust y as follows:
>>> >> "n_samples / (n_classes * np.bincount(y))"
>>> >> [1] https://scikit-learn.org/stable/modules/generated/
>>> sklearn.linear_model.SGDClassifier.html
>>> >>
>>> >> I think this can easily be achieved using SQL.
>>> >>
>>> >> Thanks,
>>> >> Makoto
>>> >>
>>> >> 2019年10月31日(木) 19:38 Shadi Mari :
>>> >> >
>>> >> > Hello
>>> >> > I am having extremely imbalanced dataset and trying to find support
>>> for class weights in hivemall ffm classifier in specific, however couldnt
>>> find any mention in the docs.
>>> >> >
>>> >> > Is this feature supported, otherwise i had to go with negative
>>> downsampling.
>>> >> >
>>> >> > Please advise
>>> >> >
>>> >> > Thank you
>>>
>>

Re: Hivemall ffm classifier and class weights

[Shadi Mari]

Hi Makoto,

libffm and Xlearn does not support class weights. However ML.NET
<http://ml.net/> does!

Class weighting is another approach to handle imbalance datasets other than
downsampling/oversampling; its a sort of a cost-sensitive learning.

I am not sure how SQL will help given than weights have to be incorporated
into the loss function during training.

Thanks

On Thu, Oct 31, 2019 at 1:05 PM Makoto Yui  wrote:

> Hi Mari,
>
> Do you have a specific example that does class weighting?
>
> libffm does not have such feature.
> https://github.com/ycjuan/libffm
>
> Sckit SGD [1] adjust y as follows:
> "n_samples / (n_classes * np.bincount(y))"
> [1]
> https://scikit-learn.org/stable/modules/generated/sklearn.linear_model.SGDClassifier.html
>
> I think this can easily be achieved using SQL.
>
> Thanks,
> Makoto
>
> 2019年10月31日(木) 19:38 Shadi Mari :
> >
> > Hello
> > I am having extremely imbalanced dataset and trying to find support for
> class weights in hivemall ffm classifier in specific, however couldnt find
> any mention in the docs.
> >
> > Is this feature supported, otherwise i had to go with negative
> downsampling.
> >
> > Please advise
> >
> > Thank you
>

Hivemall ffm classifier and class weights

[Shadi Mari]

Hello
I am having extremely imbalanced dataset and trying to find support for
class weights in hivemall ffm classifier in specific, however couldnt find
any mention in the docs.

Is this feature supported, otherwise i had to go with negative downsampling.

Please advise

Thank you

Re: [Geoserver-users] SLD wind issue

[Riccardo Mari]

Hi list,
I found the error, I used an incorrect PropertyName. My eyes could no
longer see it ;-)
Now everything is working properly ;-)
All the best, Riccardo.

Il giorno mar 29 ott 2019 alle ore 17:51 Riccardo Mari 
ha scritto:

> Sorry, here's the link to sample data, Riccardo
>
>
> https://drive.google.com/file/d/1qXDpjTA2RLRtp5PXl2wPDdSCVpOwpxlw/view?usp=sharing
>
> Il giorno mar 29 ott 2019 alle ore 17:37 Riccardo Mari 
> ha scritto:
>
>> Hi list,
>> i have a problem to render wind data on geoserver.
>> In attach you can find sample data, sld and logs.
>>
>> The style DirectionOfWindWaveSurfaceStyle.sld applied to
>> DirectionOfWindWavesSurface.tiff (one band - direction) works correctly.
>> It applies a gs:RasterAsPointCollection transformation with only one rule
>> without any filter.
>>
>> The style WindHeightAboveGroundStyle.sld applied to
>> WindHeightAboveGround.tiff (two bands - speed and direction) doesn't work.
>> It applies a gs:RasterAsPointCollection transformation with many rules
>> with filters.
>>
>> Can you give some advices on what is wrong in my filtered sld? What am I
>> doing wrong?
>>
>> Many thanks in advance, Riccardo.
>>
>> This is my geoserver instance:
>>
>> GeoServer Version
>> 2.16.0
>> Git Revision
>> 1ace4fd0a0fb861fd343435c8cbddc60af793adb
>> Build Date
>> 18-Sep-2019 10:40
>> GeoTools Version
>> 22.0 (rev 02f93f3da1bea257215ac0d685597a571a4b950b)
>> GeoWebCache Version
>> 1.16.0 (rev 1.16.x/01f14feecda71a224d7d9ee3fcf9c6ba1592bf64)
>>
>
>
> --
> Dott. Riccardo Mari
>
> Esperto in Sistemi Informativi Territoriali (GIS),
> Cartografia Tematica e Telerilevamento.
> Sviluppo applicazioni WebGIS, Spatial Data Infrastructure(SDI).
>
> Cell: (+39) 333 3180590
> e-mail: rmar...@gmail.com
>


-- 
Dott. Riccardo Mari

Esperto in Sistemi Informativi Territoriali (GIS),
Cartografia Tematica e Telerilevamento.
Sviluppo applicazioni WebGIS, Spatial Data Infrastructure(SDI).

Cell: (+39) 333 3180590
e-mail: rmar...@gmail.com
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Re: [Geoserver-users] SLD wind issue

[Riccardo Mari]

Sorry, here's the link to sample data, Riccardo

https://drive.google.com/file/d/1qXDpjTA2RLRtp5PXl2wPDdSCVpOwpxlw/view?usp=sharing

Il giorno mar 29 ott 2019 alle ore 17:37 Riccardo Mari 
ha scritto:

> Hi list,
> i have a problem to render wind data on geoserver.
> In attach you can find sample data, sld and logs.
>
> The style DirectionOfWindWaveSurfaceStyle.sld applied to
> DirectionOfWindWavesSurface.tiff (one band - direction) works correctly.
> It applies a gs:RasterAsPointCollection transformation with only one rule
> without any filter.
>
> The style WindHeightAboveGroundStyle.sld applied to
> WindHeightAboveGround.tiff (two bands - speed and direction) doesn't work.
> It applies a gs:RasterAsPointCollection transformation with many rules
> with filters.
>
> Can you give some advices on what is wrong in my filtered sld? What am I
> doing wrong?
>
> Many thanks in advance, Riccardo.
>
> This is my geoserver instance:
>
> GeoServer Version
> 2.16.0
> Git Revision
> 1ace4fd0a0fb861fd343435c8cbddc60af793adb
> Build Date
> 18-Sep-2019 10:40
> GeoTools Version
> 22.0 (rev 02f93f3da1bea257215ac0d685597a571a4b950b)
> GeoWebCache Version
> 1.16.0 (rev 1.16.x/01f14feecda71a224d7d9ee3fcf9c6ba1592bf64)
>


-- 
Dott. Riccardo Mari

Esperto in Sistemi Informativi Territoriali (GIS),
Cartografia Tematica e Telerilevamento.
Sviluppo applicazioni WebGIS, Spatial Data Infrastructure(SDI).

Cell: (+39) 333 3180590
e-mail: rmar...@gmail.com
___
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Re: [Bug 1843471] [NEW] missing dependency on lxqt-config-l10n

[veronica mari jormsell]

i am sorry i dont understan  what this is all about??
all these emails about "bugrrports" im not a technichian
Skickat från min iPhone

> 10 sep. 2019 kl. 20:08 skrev Pavel Borecki <1843...@bugs.launchpad.net>:
> 
> Public bug reported:
> 
> Without it, localization don't get installed by default, which will
> damage out of box user experience (users will be simple thinking, that
> this isn't localized yet at all and will not search for -l10n package).
> 
> ** Affects: lxqt-config (Ubuntu)
> Importance: Undecided
> Status: New
> 
> -- 
> You received this bug notification because you are a member of Lubuntu
> Packages Team, which is subscribed to lxqt-config in Ubuntu.
> https://bugs.launchpad.net/bugs/1843471
> 
> Title:
>  missing dependency on lxqt-config-l10n
> 
> Status in lxqt-config package in Ubuntu:
>  New
> 
> Bug description:
>  Without it, localization don't get installed by default, which will
>  damage out of box user experience (users will be simple thinking, that
>  this isn't localized yet at all and will not search for -l10n
>  package).
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/lxqt-config/+bug/1843471/+subscriptions

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1843471

Title:
  missing (recommend) dependency on lxqt-config-l10n

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lxqt-config/+bug/1843471/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [NTG-context] Page number woes

[Mari Voipio]

Well, this was total waste of space from my part. When I found a
working file in a different project and copied the code over I
realized that my problem code should never have worked: I had
\setuppagenumber[stop] when I should have had
\setuppagenumber[state=stop]. Adding "state=" to my non-working code
solved all the problems and page numbering works the way I want to
have it.

And, as Wolfgang explained, I really don't need
\setuppagenumber[state=start] in the beginning of bodymatter, so now I
can even clean up my code a bit. Thank you, Wolfgang, I think I
understand blocks better now.

Mari


On Tue, Sep 3, 2019 at 7:03 PM Wolfgang Schuster
 wrote:
>
> Mari Voipio schrieb am 02.09.2019 um 13:07:
> > Hello!
> >
> > I have a document where I want the page numbers to start from the
> > first page of chapter one. There's bunch of stuff before that,
> > including a table of contents. This has worked fine:
> >
> > \startproduct prd-pr23
> >
> > \startfrontmatter
> > \setuppagenumber[stop]
> > \component pr23-cover_front_web
> > \component blank.tex
> > \component c-contents
> > \stopfrontmatter
> >
> > \startbodymatter
> > \setuppagenumber[start]
> > \component dtr_pg.tex
> > \stopbodymatter
> >
> > \stopproduct
> >
> >
> > However, now I need to switch to using a full-page pdf as cover page
> > and changing that one line messes up with my page numbering, now TOC
> > appears as page 1 and chapter one starts from page 2 in my test file.
> >
> >
> > \startproduct prd-pr23
> >
> >
> > \startfrontmatter
> > \setuppagenumber[stop]
> > \startpagefigure[cover_vaisala_front_stripped]\stoppagefigure
> > \component blank.tex
> > \component c-contents
> > \stopfrontmatter
> >
> > \startbodymatter
> > \setuppagenumber[start]
> > \component dtr_pg.tex % third chapter (DTR)
> > \stopbodymatter
> >
> > \stopproduct
> >
> > What is it that I don't see? I tried moving the cover page before the
> > \startfrontmatter, but that didn't change anything, TOC still starts
> > on page 2 when it shouldn't have a page number at all. Why does
> > switching the cover page from .tex to \pagefigure have such an effect
> > and how can I counteract it?
> >
> > Mari
> The \setuppagenumber command takes an assignment as argument but in your
> example you pass keywords to it.
>
> When you change the setting in the frontmatter to
> \setuppagenumber[state=stop] the numbers disappear. Since settings in a
> sectionblock are local there is no need to enable the counter in the
> bodypart because the previous setting is forgotten.
>
> When I look in your attached files I see that some file contain the
> setting \setuppagenumber[state=stop] which disabled the page counter.
>
> Wolfgang
>
___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___

[jira] [Resolved] (OAK-8555) Move ByteBuffer wrapper to oak-commons project

[Francesco Mari (Jira)]

 [ 
https://issues.apache.org/jira/browse/OAK-8555?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
 ]

Francesco Mari resolved OAK-8555.
-
Fix Version/s: 1.18.0
   Resolution: Fixed

Fixed at r1865623.

> Move ByteBuffer wrapper to oak-commons project
> --
>
> Key: OAK-8555
> URL: https://issues.apache.org/jira/browse/OAK-8555
> Project: Jackrabbit Oak
>  Issue Type: Improvement
>  Components: commons, segment-tar
>Reporter: José Andrés Cordero Benítez
>    Assignee: Francesco Mari
>Priority: Major
> Fix For: 1.18.0
>
> Attachments: move-Buffer-wrapper-svn.patch, 
> move-Buffer-wrapper-with-tests.patch
>
>
> As discussed with [~frm] and [~mreutegg], the wrapper 
> org.apache.jackrabbit.oak.segment.spi.persistence.Buffer should be moved to 
> the commons project to make it more accessible in other projects that need to 
> use it to fix OAK-7457.



--
This message was sent by Atlassian Jira
(v8.3.2#803003)

[jira] [Commented] (OAK-8555) Move ByteBuffer wrapper to oak-commons project

[Francesco Mari (Jira)]

[ 
https://issues.apache.org/jira/browse/OAK-8555?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel=16912270#comment-16912270
 ] 

Francesco Mari commented on OAK-8555:
-

[~corderob], thanks for your contribution!

> Move ByteBuffer wrapper to oak-commons project
> --
>
> Key: OAK-8555
> URL: https://issues.apache.org/jira/browse/OAK-8555
> Project: Jackrabbit Oak
>  Issue Type: Improvement
>  Components: commons, segment-tar
>Reporter: José Andrés Cordero Benítez
>    Assignee: Francesco Mari
>Priority: Major
> Fix For: 1.18.0
>
> Attachments: move-Buffer-wrapper-svn.patch, 
> move-Buffer-wrapper-with-tests.patch
>
>
> As discussed with [~frm] and [~mreutegg], the wrapper 
> org.apache.jackrabbit.oak.segment.spi.persistence.Buffer should be moved to 
> the commons project to make it more accessible in other projects that need to 
> use it to fix OAK-7457.



--
This message was sent by Atlassian Jira
(v8.3.2#803003)