There is a modify command for ANTMAIN which handles cache for DFDSS
ConcurrentCopy to limit the storage used regarding the aux storage available.
Search with keywoard CC in the sms booksheleves.
--
For IBM-MAIN subscribe /
Hi ,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of August Carideo
Sent: Wednesday,
Sharon,
in my opinion, this is a too much buffer usage symtom for your XRC
complex.
The total amount of fixed buffers for your four SDM sessions is very close
(or maybe exceeds) the amount of REAL memory assigned to SDM LPAR.
This problem maybe originated by many sources:
- spike on writes on
Hi Sharon,
seem similar with multiple concurrent copy sessionswhen the quantity of
disk updates exceeded the rate at which data was being written to tape
flow control problem...
you need to confirm that your data paths out of your SDM lpar are sufficient
to contain the volume of data
Knutson, Sam sknut...@geico.com wrote in message
news:46fe133d4aaa934296decc2288050f2b02f4c...@gp2k0084v3.geico.corp.net
...
Even though it is not the default with appropriate testing no one
should be afraid of setting USEZOSV1R9RULES(NO).
This is going to have a positive impact on performance
August Carideo asks:
Any suggestions from the list for replacements of the below listed
products
would be appreciated
am assuming SYNC sort can be replace with IBM DFSORT, or CASORT but trying
to avoid CA products
CA Products
ACF2
z/OS Security Server (RACF) - IBM Program Number 5694-A01
You may
I don't want to exclude the Address space parameters the RSMDATA
DSPACE report tells me
that I have over 2 real frames
Backing up my data space
So. To get a more detailed picture
Which Vitual Page of the Dspace is backed by Real
I tried VIRTPAGE DATASPACES ad I would expect
Hi,
While running a defrag using ADRDSSU i am getting the following:
IEA794I SVC DUMP HAS CAPTURED: 380
DUMPID=020 REQUESTED BY JOB (HPDPEXTI)
DUMP TITLE=ICVCMM00 HPDPEXTI CVAF ERROR TYPE 2 TCB= 008D15C8 W/
A=7F3DE02C
0ADR227E (001)-DFRGD(09), CVAF ERROR ON VOLUME P3GE91, CODE
amit amitpdu...@gmail.com wrote in message
news:aanlkti=sg2vw7c7fo89zev0wooy-mtxiw5gpga5db...@mail.gmail.com...
Hi,
While running a defrag using ADRDSSU i am getting the following:
IEA794I SVC DUMP HAS CAPTURED: 380
DUMPID=020 REQUESTED BY JOB (HPDPEXTI)
DUMP TITLE=ICVCMM00 HPDPEXTI
By SVC dump means either the SDUMP macro or console DUMP command I did
console DUMP
I included with my address space and RASP.
Not sure what you mean by DAT structures I know DAT as dynamic address
translation
If RSMDATA command can see the dataspaces with the DSPACE report type.
Then
yes, i got that one and noticed that even when we have 1,11 currently, this
APAR is not installed.
wanted to have a second opinion whether i shld go ahead with the Fix, and
more of a reason how to pin point what this error is about,
On Thu, Oct 28, 2010 at 4:38 PM, Vernooij, CP - SPLXM
The REALFRAME report.
seems to include Dataspace information. Re: what real frames back up
dataspaces and address spaces
Sent from my iPhone
On Oct 28, 2010, at 7:10 AM, Micheal Butz michealb...@optonline.net
wrote:
By SVC dump means either the SDUMP macro or console DUMP command I
By SVC dump means either the SDUMP macro or console DUMP command I did
console DUMP
I included with my address space and RASP.
Not sure what you mean by DAT structures I know DAT as dynamic address
translation
If RSMDATA command can see the dataspaces with the DSPACE report type.
Hi there,
I'd like to test IATUX61 JES3 exit which deals with jobs ending up on
MDS error queue. I have no idea how to force a job to end up on the
MDS error queue so that I could see if the exit does what it is
supposed to do.
Anybody having an idea?
--
Thanks,
Manfred
Jim
I did just about the same as what you pointed out
With 2 exceptions instead of ASID. I specfied the Jobname.
Myjob and RASP
Both for what address spaces I want dumped and what dataspaces
The other difference is for SDATA
I specfied CSA and RGN. Should that make a difference
Sent from
On Thu, 28 Oct 2010 13:43:52 +0200 Manfred Lotz manfred.l...@googlemail.com
wrote:
:Hi there,
:I'd like to test IATUX61 JES3 exit which deals with jobs ending up on
:MDS error queue. I have no idea how to force a job to end up on the
:MDS error queue so that I could see if the exit does what it
On Thu, 28 Oct 2010 13:43:52 +0200, Manfred Lotz wrote:
Hi there,
I'd like to test IATUX61 JES3 exit which deals with jobs ending up on
MDS error queue. I have no idea how to force a job to end up on the
MDS error queue so that I could see if the exit does what it is
supposed to do.
Anybody
Given that another ISV has spoken up, I should do the same.
File-AID MVS has a compatible compare function as well, however it is
not the only function but one of many.
A 'Swiss army' knife of data, if you want but of course I am a
little prejudiced
;-).
-Original Message-
From:
David,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
SMS does not handle NOTCAT2 so you need to make sure that support
is not a requirement.
Regards,
John
Data Direct Products
SQLINK
John H Kington pisze:
David,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
SMS does not handle NOTCAT2 so you need to make sure that support
is not a requirement.
What does it mean?
Or another approach, if you are already filtering out and reviewing RACF
SMF records: Create a suitable RACF PROGRAM profile for each of the
programs with UACC READ but with READ auditing enabled. This will also
catch any invocation of the programs by other programs, which includes
TSO
Radoslaw,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
SMS does not handle NOTCAT2 so you need to make sure that support
is not a requirement.
What does it mean? Just curious.
Amit,
As part of your DEFRAG job, are you also using the CONSOLIDATE
keyword? If so, have a look at APAR OA34585 which is still open and the
local fix is to remove the CONSOLIDATE keyword from your DEFRAG job.
Roger
--
John H Kington pisze:
Radoslaw,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
SMS does not handle NOTCAT2 so you need to make sure that support
is not a requirement.
What does it mean?
R.S. r.skoru...@bremultibank.com.pl wrote in message
news:4cc98d6d.4070...@bremultibank.com.pl...
John H Kington pisze:
Radoslaw,
To get rid of CA ALLOCATE, just do a proper SMS implementation using the
classes provided by DFSMS. This will do most of the work performed by
ALLOCATE
i thought the daily frequency would be obvious - four tran
Chris Hoelscher
IDMS/DB2 System Database Architect
Humana Inc
502-476-2538
choelsc...@humana.com
I refuse to repeat gossip - so listen carefully the first time
From:
Joel C. Ewing jcew...@acm.org
To:
IBM-MAIN@bama.ua.edu
Date:
I remember--back when---a list of terms used on Mainframe and relating to
comparable terms to other systems ..
does anyone know where that maybe located..
example
TSO like vu or some editor
TSO / ISPF gui editor ...
SMPE like / similar to SMIT or RPM
so on
One virtual machine per fisherman: On IBM, Linux, Mainframe and the cloud
Here's the article:
http://www.redmonk.com/jgovernor/2010/10/21/one-virtual-machine-per-fisherman-on-ibm-linux-mainframe-and-the-cloud/
This article delights me for several reasons --- something Italian,
new mainframe, and
We ran into a problem with Connect Direct at the 4.6 release level. The
problem
is fixed in Connect Direct 4.7 and 4.8.
- Original Message
From: Vernooij, CP - SPLXM kees.verno...@klm.com
To: IBM-MAIN@bama.ua.edu
Sent: Thu, October 28, 2010 2:43:33 AM
Subject: Re: z/os 1.11 and
Try this
http://www.ibm.com/developerworks/systems/library/es-zosdisterm.html
There is a table at the bottom of the page
Mike
On Thu, Oct 28, 2010 at 5:06 PM, Ron Wells rwe...@agfinance.com wrote:
I remember--back when---a list of terms used on Mainframe and relating to
comparable terms to
On 10/26/2010 4:28 PM, Knutson, Sam wrote:
Even though it is not the default with appropriate testing no one should be
afraid of setting USEZOSV1R9RULES(NO).
This is going to have a positive impact on performance in select tasks.
We went to production this way VSM USEZOSV1R9RULES(NO) and have
COULD YOU POSSIBLY GIVE ME YOUR CASE NUMBER FOR THIS PROBLEM?
WE HAVE CONNECT:DIRECT 4.6 AND ARE HOPING TO RUN IT ON Z/OS 1.12. I NEED TO
KNOW IF WE'LL HIT YOUR BUG
('SCUSE CAPS - KEYBOARD WONKY!!!)
Andy Robertson telephone mobile 0777 214 9545 home 01308 420797
From:
I will be out of the office starting 10/28/2010 and will not return until
11/08/2010.
I will be out of the office until Monday, November 8. For DB2 issues that
need to be addressed before then, please call Taka Yokota at 1-2432
By the book, this simple Rexx syntax should work, but I am unable to manipulate
the external stack in Rexx. The following simple program says Queued: 0 and
the NETSTAT output gets executed at TSO logout (numerous IKJ56500I COMMAND
EZZ2587I NOT FOUND messages). The program:
Netstat STACK
say
Hi list,
I can't find the answer in the CA documentation (or on Google) so I thought I'd
come here. In the TPX SMF records -specifically the interval and shutdown
records - there is a section that has SACB statistics. It has 2 fields in it,
current SACBs in use and the SACB high water mark.
Readers of this list will be well aware that if a PDS is allowed to take
extents,
and does, modules in the additional area may not be able to be fetched
because the DEB chain hasn't been updated.
Is the same true of a PDSE? The method of fetching a module is different from
a PDSE so this
On Thu, 28 Oct 2010 16:32:36 -0500, Anthony Fletcher flet...@nz1.ibm.com
wrote:
Readers of this list will be well aware that if a PDS is allowed to take
extents,
and does, modules in the additional area may not be able to be fetched
because the DEB chain hasn't been updated.
Is the same true of
Larry:I have had a rather bad experiance with the (granted it was10+ years ago)
but I have not seen or heard anything that would suggest I rethink that
decision.
Ed
--- On Wed, 10/27/10, Larry Macioce mace1...@gmail.com wrote:
From: Larry Macioce mace1...@gmail.com
Subject: Re: Product
Tony:
Long long time ago, we had a user that wanted LISP for MVS. He wanted it to
covert DOS JCL to JCL (MVS). He worked on it for some time and never got it
to work quite to his liking. I have *NO* idea how good/bad it was but he loved
LIST. My memory is poor whether the deck he handed me was
On 28 October 2010 17:18, David G. Schlecht dschle...@doit.nv.gov wrote:
By the book, this simple Rexx syntax should work, but I am unable to
manipulate the external stack in Rexx. The following simple program says
Queued: 0 and the NETSTAT output gets executed at TSO logout (numerous
On Thu, 28 Oct 2010 11:14:28 +0930, Anthony Thompson
anthony.thomp...@nt.gov.au wrote:
z/OS 1.12 has a new ALLOC parameter that is supposed to improve DB2
start-up times when it's got zillions of files too:
SYSTEM MEMDSENQMGMT(ENABLE)
This option re-jigs allocation/de-allocation processing to
Dears ,
as the subject , A couple of things as following to clarify .
1) Is the z10 PSP bucket sufficient for z/OS V1.7 ? Namely ,from technology
perspective ,is the IBM extended support must or nice to have to
support in case of ... ?
Regrads,
Laurence
Joel:
Interesting suggestion and will have to think on it for a while berfore trying
it.*ASSUMING* this FORTRAN program is NOT dynaically loaded.I would go after
the (used to be type 4 SMF records and if I recall correctly at least SAS used
to off a freebie that did this. I have a stuck memory
43 matches
Mail list logo
