It would be great if they sold hybrid fiber/DC custom cables. On Thu, Dec 20, 2018 at 3:22 PM Nate Burke <n...@blastcomm.com> wrote:
> Item 29606, Customized 4 Fibers Indoor/Outdoor Single Mode Pre-Terminated > Assembly, 2.0mm Breakout Cable. You can select a custom length. It's not > a super heavy cable fiber, so I don't think suspension would be a problem, > but it also didn't feel flimsy like the UBNT "tough fiber". We've run them > vertically on 100'+ grain legs without a problem. I put pulling eyes on > both ends just to help with installation, helps protect the ends as you > unspool. > > On 12/20/2018 2:10 PM, SmarterBroadband wrote: > > Hi Nate > > > > We are looking at the fiber store, which cable did you choose? These > will be hanging 100 feet… > > > > Adam > > > > *From:* AF [mailto:af-boun...@af.afmug.com <af-boun...@af.afmug.com>] *On > Behalf Of *Nate Burke > *Sent:* Thursday, December 20, 2018 12:07 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> <af@af.afmug.com> > *Subject:* Re: [AFMUG] Fiber up the tower > > > > I've been getting mine custom made from Fiber Store. Only problem is > about a 30 day lead time. https://www.fs.com/products/29606.html Used > it on several sites and haven't had a problem with it. > > Nate > > On 12/20/2018 2:02 PM, SmarterBroadband wrote: > > What are people using for Fiber up the tower? > > > > We are looking for Single mode 4 strand – 2 LC Duplex at each end. 140 > foot lengths. They will be run up inside a monopole. > > > > Are you using armored? Outdoor? What? > > > > Where are people getting theirs made? > > > > Thanks > > > > Adam > > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
